• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전력기술부문
• /
• pp.361-363
• /
• 2003

To reduce the effect of fault on underground power cable, we need exact and fast fault location detection technique. In this thesis, we describe on filter design technique that can be applied to on-line fault defection technique. To design fitter for fault location defection on Power cable, we should analysis fault signal. So we designed test bed for fault generation and measured fault signals for analysis. Through the analysis of signals, we found that ANC filter can be applied to separate fault signals and we designed a ANC filter. We tested on the designed filter through computer simulation, and we describe its results in this paper.

• International Journal of Control, Automation, and Systems
• /
• 제6권1호
• /
• pp.142-148
• /
• 2008

In this paper, we deal with the problem of reducing the order of the detection filter for the linear time-invariant system. Even if the detection filter is generally designed in the form of full order linear observer, we show that it is possible to reduce its order when the response of fault signals is limited to a subspace of the estimation state space. We propose a method to extract the subspace using the observer canonical form considering the dynamics related to the remaining subspace acts as a disturbance. We designed a reduced order detection filter to reject the disturbance as well as to guarantee fault detection and isolation. A simulation result for a 5th order system is presented as an illustrative example of the proposed design method.

• 대한전기학회논문지
• /
• 제40권1호
• /
• pp.120-127
• /
• 1991

The purpose of this study is to develop a fault detection and diagnosis scheme that can monitor process fault and instrument fault of a steam generator. The suggested scheme consists of a Kalman filter and two bias estimators. Method of detecting process and instrument fault in a steam generator uses the mean test on the residual sequence of Kalman filter, designed for the unfailed system, to make a fault decision. Once a fault is detected, two bias estimators are driven to estimate the fault and to discriminate process fault and instrument fault. In case of process fault, the fault diagnosis of outlet temperature, feed-water heater and main steam control value is considered. In instrument fault, the fault diagnosis of steam genrator's three instruments is considered. Computer simulation tests show that on-line prompt fault detection and diagnosis can be performed very successfully.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권10호
• /
• pp.1264-1271
• /
• 1999

In this paper, an efficient method of analysis and design of fault detection filter is presented. Since the directional constraint is applied to the eigenstructure associated with the detection space, an eigenvector is determined by the eigenvalues associated with other eigenvectors. Further, the assignment of a pair of eigenvalue and eigenvector leads to the fixation of overall eigenstructure related with the detection space. Using the transmission zeros and the transmission zero vectors, these phenomenon are clearly proven, and an efficient algorithm for design of the fault detection filters is presented.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년도 제31회 추계학술대회논문집
• /
• pp.192-195
• /
• 2008

다중 트림 상태에서 헬리콥터용 소형 터보샤프트 엔진에 부착된 센서의 고장을 검출하기 위한 방법을 제시한다. 먼저 헬리곱터의 엔진, 로터, 되먹임(feedback) 제어루프가 포함된 비선형 모델을 구하고 다중 트림 상태에서의 선형 모델을 추출하였다. 고장 검출 방법은 칼만필터에 기반한 방법을 채용하였는데 트림 상태가 변화할 때에 필터의 추정값이 연속적으로 변화하도록 상태변수 초기값을 재구성하였다. 또한 어떠한 센서가 고장이 일어났는지 구분할 수 있도록 어떤 센서의 고장을 검출한 다음 문제가 없는 경우 다음 센서의 고장 검출을 수행하는 단계적인 방법을 사용하였다. 시뮬레이션을 통하여 제시한 방법이 다중 트림 상태에서 각 센서의 고장을 잘 검출함을 보였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 하계종합학술대회논문집
• /
• pp.211-214
• /
• 1998

A detection filter assigns a specific direction to the response with respect to each fault, by which it can detect the occurrence of the several faults. The separability of a detection filter can be determined by the orthogonality among these directions. In this paper, we define the separability of a detection filter as the orthogonality of the directions in output space, and present it mathematically by using conditions number. An algorithm to determine the optimal sensor gain to maximize separability is proposed and applied to the PWR nuclear reactor model.

• 항공우주시스템공학회지
• /
• 제11권4호
• /
• pp.22-29
• /
• 2017

비선형특성을 갖고 있는 실제 무인기용 소형터보제트엔진의 운전 중 발생하는 결함을 효과적으로 탐지하기 위한 방안에 대해 연구하였다. 이를 위해서 동적 열역학 사이클해석을 통한 비선형 동특성 모델을 도출하였다. 실제적인 운전상황의 연출을 위해 잡음특성의 평가에 부합하는 무향칼만필터를 적용하였고 필터성능이 가미된 제어기를 설계하였다. 엔진회전수 센서의 결함을 통한 엔진 결함발생을 모사하였고, 발생된 결함의 실시간적인 탐지 방안으로 연속확률비 평가기법을 도입하였다. 이를 운전 중 엔진결함탐지에 적용한 결과 분명한 결정양상을 보임으로써 매우 효과적이고 유용함을 확인하였다.

• 한국지능시스템학회논문지
• /
• 제25권6호
• /
• pp.615-620
• /
• 2015

본 논문에서는 화력발전소 보일러-터빈 제어시스템의 고장검출 시스템을 설계한다. 이를 위하여 보일러-터빈의 비선형 동특성을 측정 가능한 시변 파라메터를 갖는 T-S 퍼지시스템으로 나타내고 관측기 기반의 고장검출 필터를 사용하여 오차발생기를 설계한다. 고장발생 측정기를 식별하기 위하여 고장검출 필터 출구에 근사적인 역시스템을 연결하였다. 제시한 방법의 효용성을 컴퓨터 모의실험을 통하여 입증한다.

• International Journal of Aeronautical and Space Sciences
• /
• 제7권1호
• /
• pp.73-83
• /
• 2006

In this paper, a redundancy management system for aircraft is studied, and fault detection and isolation algorithms of inertial sensor system are proposed. Contrary to the conventional aircraft systems, UAV system cannot allow triple or quadruple hardware redundancy due to the limitations on space and weight. In the UAV system with dual sensors, it is very difficult to identify the faulty sensor. Also, conventional fault detection and isolation (FDI) method cannot isolate multiple faults in a triple redundancy system. In this paper, two FDI techniques are proposed. First, hardware based FDI technique is proposed, which combines a parity equation approach with a wavelet based technique. Second, analytic FDI technique based on the Kalman filter is proposed, which is a model-based FDI method utilizing the threshold value and the confirmation time. To provide the reference value for detecting the fault, residuals are calculated using the extended Kalman filter. To verify the effectiveness of the proposed FDI methods, numerical simulations are performed.

• Journal of Electrical Engineering and Technology
• /
• 제9권4호
• /
• pp.1401-1410
• /
• 2014

This paper presents a modified adaptive fading EKF (AFEKF) for sensor fault detection and isolation in the satellite. Also, the fault detection and isolation (FDI) scheme is developed in three phases. In the first phase, the AFEKF is modified to increase sensor fault detection performance. The sensor fault detection and sensor selection method are proposed. In the second phase, the IMM filer with scalar penalty is designed to detect wherever actuator faults occur. In the third phase of the FDI scheme, the sub-IMM filter is designed to identify the fault type which is either the total or partial fault. An important feature of the proposed FDI scheme can decrease the number of filters for detecting sensor fault. Also, the proposed scheme can classify fault detection and isolation as well as fault type identification.