• International Journal of Naval Architecture and Ocean Engineering
• /
• v.13 no.1
• /
• pp.585-598
• /
• 2021

The course-keeping stability of a high speed planing boat should be considered at the design stage for its safe operations. The shape of waterjet intake plane is one of important design parameters of a waterjet propelled planing boat. That has significant influences on the stern flow patterns and pressure distributions. In this study, the effects of the waterjet intake shapes of planing boats on the course-keeping stabilities are investigated. Two kinds of designed planing boats have the same dimensions, but there are differences in waterjet intake plane shapes. Captive and free-running model tests, Computational Fluid Dynamics (CFD) analyses are carried out in order to estimate their hydrodynamic performances including course-keeping stabilities. The results show that the flat and wide waterjet intake plane of the initially designed boat makes the course-keeping stability worse. The waterjet intake shape is redesigned to improve the course-keeping stability. The improved performances are confirmed by free-running model tests and full-scale trials.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.27 no.2
• /
• pp.41-50
• /
• 1999

The purpose of this study is to find out the changes in geomorphic characteristics of a small watershed when a golf course is constructed. The research site is a set of seven small watersheds including an 18-hole golf course that were randomly selected. The size, shape, and drainage network of watersheds were measured by using planimeter, watershed eccentricity, and stream order, respectively. In addition, a 25m$\times$25m mesh was used on topographic maps and grading plans in order to obtain the slope, elevation, and aspect of the watersheds. The major results of this research, while investigating of the changes in geomorphic characteristics of watersheds when a golf course is constructed, are as follows: 1. The size of watersheds is increased in accordance to the difference in elevation between the golf course site and the small watershed. 2. The watershed eccentricities are in general similar except for a few low-valued cases. 3. The changes in the average altitude and the gradient are more drastic with their bigger original values. 4. The aspects are changed more with decreasing elevation. 5. The stream order decreases in the case of a low watershed eccentricity. 6. The surface modification has a closer relationship to the slope rather than the size of effective use area. 7. With a steeper gradient and an excessively low gradient, the height of cutting/filling is increased.

• Journal of Engineering Education Research
• /
• v.15 no.5
• /
• pp.131-139
• /
• 2012

This paper emphasizes writing education for engineering students should be communication driven writing education based on KEC2005. Communication driven writing for engineering students is essentially same as Technical Writing(TW) developed on the basis of ABET. Considering the current writing capability of engineering students and social need for various types of writing, TW education should be divided into two courses: basic and advanced. This paper deals with contents of a basic TW course in Myongji University, as a model case of a basic TW course for engineering students. It underlines various methods of prewriting that should be stressed and practiced in the TW class, because the prewriting step in the writing process determines the overall direction and structure of an essay. In particular, this paper introduces Power Writing(PW) which uses the structure of a paragraph as a means for providing building-blocks for the essay, employing logic, and ordering information arrangement in a paragraph. This paper also deals with important guidelines about sentence structure and word selection and proposes various applications of TW such as resume, interview, proposal, report, and presentation as a latter part of the basic course. Finally this paper highlights the etics of writing, such as plagiarism and the basic principles of quotation.

• The Journal of Korean Association of Computer Education
• /
• v.19 no.3
• /
• pp.55-66
• /
• 2016

This study explored the rating tendency of online university learners in their course evaluations and its effects on the course evaluation results. Data including the subjects' demographic information, learning activities, rating tendency, and course evaluation results were collected from 1,098 learners in an online university in the spring semester of 2015. There were three main findings. First, the subjects showed distinctive rating tendencies in participation rates for course evaluation and rating consistency. The participation rates went from one extreme (0%) to the other (100%), and the rating consistency among the test items was highly related to that among the courses as a whole. Second, the subjects showed different tendencies in terms of course evaluation period, rating consistency, and course evaluation results according to demographic information and learning activities. Third, course evaluation results were independently affected by demographic information, learning activities, and rating consistency. The study was meaningful in that it explored learners' rating tendencies concretely and suggested that such tendencies should be considered in analyzing course evaluation results.

• The Korean Journal of Emergency Medical Services
• /
• v.13 no.2
• /
• pp.17-59
• /
• 2009

Purpose : This study is to provide the basic data for developing the curriculum standardization of emergency medical technology by analyzing the three-year and four-year period curriculum and high-advanced major course to bring up highly qualified paramedics. Method : This study was analyzed, divided in 3 sections, majors, teaching profession subjects and liberal arts of 18 three-year curriculum universities and 7 four-year curriculum universities. Majors were analyzed, departmentalized in the national examination for license, the clinical and on-the-job training(OJT) and other major-related subjects. It is descriptive study, analyzed by dividing high-advanced major course into majors and liberal arts. Result : 1) The average number of subjects established in three-year-course college were 58.1. The completion credit was 130.1 in average. Also, the average number of established subjects at four-year-course were 61.1. The average completion credit was 141. 2) Three-year-course college professors give lecture in theory for 95.4 hours on average, which account for 59.9% of overall lecture, and 63.8 hours for practical training that takes 40.1% of the hours lectures are given. Meanwhile, four-year-course give lecture in theory for 111 hours on average, taking a part of 59.5%, and 76.5 hours for practical training, 40.5%. 3) In regard to liberal arts, at three-year-course college, the average credit was 16 but the proportion that liberal arts charge among the completion credit was 11.6. Meanwhile, at four-year-course universities, the average credit was 28.4 and the percentage that the liberal arts took part in the completion credit was 20.1. 4) Looking over national examination subjects among majors at three-year-course college, basic medicine's average credit was 17.2, introduction to advanced emergency care's average credit was 15.5, Special advanced emergency care's average credit was 28, emergency patient management's average credit was 9.2 and emergency medicine statute's average credit was 3.6. Meanwhile, in case of four-year-course universities, basic medicine's average credit was 14.3, introduction to advanced emergency care's average credit was 12.7, special advanced emergency care's average credit was 31, emergency patient management's average credit was 8.3 and emergency medicine statute's average credit was 2.9. 5) Among national examination subjects, in case of three-year-course, the range of basic medicine credits was 6 to 23, the average credit showed 17.2. The range of introduction to advanced emergency care credits was 9 to 21, the average credit showed 15.5. The range of special advanced emergency care credits was 19 to 36, the average credit showed 28. The range of emergency patient management credits was 5 to 12, the average credit was 9.2. The range of legal medicine credits was 3 to 6, the average was 3.6 credit. In case of four-year-course the range of basic medicine was 12 to 17, the average of the credit was 14.3. The range of introduction to advanced emergency care was 9 to 19, and the average of the credit was 12.7. The range of special advanced emergency care was 18 to 41, and the average of the credit was 31. The range of emergency patient management was 7 to 12, and the average of the credit was 8.3. The range of legal medicine was 3 to 4, and the average of the credit was 2.9. So except special advanced emergency care, all the other subjects had higher score in three-year-course than four-year-course. 6) About the other major-related subjects, the completion credit was 23 on average at three-year-course and 13.5 at four-year-course. 7) The clinical and on-the-job training(OJT), In the case of three-year-course, the average completion credit was 13.5 and 13.5 at four-year-course. 8) The teaching profession subject, In the case of three-year-course, the average credit was 3 and the percentage that the teaching profession subject took part in the completion credit was 2.3% on average. Four-year-course established the subject only at one university. 9) In high-advanced major process, the entire established subjects on average were 12.8 and the average completion credit was 36.3. In liberal arts, the average established subjects were 6.5 and the completion credit was 19.5. The number of majors were 9.5 on average and the credit was 26.5 Conclusion : According to the aforemention results, the curriculum for emergency medical technology needs to be developed and standardized.

• Korean Journal of Human Ecology
• /
• v.21 no.3
• /
• pp.505-526
• /
• 2012

The purpose of this research is to investigate changes in ethical consumption practices after taking an undergraduate course 'Consumption and Ethics'. Through Qualitative & Quantitative research methods, students' pre-course and post-course attitudes were compared to understand changes in behavior. Before taking the course 'Consumption and Ethics', undergraduate participants displayed little regard for ethical consumption, instead displaying primary sensitivity to price and values based on self-centered and conspicuous consumption. After taking the course 'Consumption and Ethics', participants displayed a more altruistic awareness of consumption on society and the environment. In addition, participants displayed a stronger sense of pride as ethical consumer. These emerging values were contrasted with conflicting feelings resulting from the higher prices often associated with ethical products, feelings of regret resulting from ethically-based impulse purchases, and an inability to categorically evaluate the reliability of available information on the ethical products. However, participants demonstrated a willingness to practice ethical consumption and recommend ethical consumption to their friends and neighbors. Overall, participants in the study demonstrated a strong shift to be an ethical consumer as a result of taking the course 'Consumption and Ethics'.

• Journal of Korean Library and Information Science Society
• /
• v.46 no.3
• /
• pp.89-118
• /
• 2015

We had opened a course in the library and information science curriculum, developed and applied a syllabus and some manuals for this course, and analyzed the performance by conducting a survey before and after the training. As the results, first, the necessary components showed a positive relationship of 0.414 with the expected performance effects and showed a positive relationship of 0.452 with the expected learning outcomes. Second, the understanding degree of the Capstone Design course was 3.56 before implementing the curriculum. It was improved to 4.07 after implementing the educational courses. Third, the recognition of the components necessary for the Capstone Design course was improved from 4.13 to 4.39 after carrying out the course. Fourth, the perception of the expected performance effects of the Capstone Design course was improved from 3.77 to 3.88 after the course execution. Fifth, the perception of the expected learning outcomes of the Capstone Design course was improved from 3.79 to 4.22 after the course implementation.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.1
• /
• pp.5-13
• /
• 2007

The trajectory of an current artillery munition is subject to a variety of different error sources resulting in more or less big deviation from the nominal predicted flight path. The 1D CCM(Course Correction Munition) has appeared to solve this problem and the mechanism of 1D CCM is a simple and low cost one using the influence of drag to range behavior of an artillery munition. In the paper 1D CCM concept has been simulated using wind tunnel experiment results of the specified Korean munition with CCF(Course Correction Fuze) and calculated the performance of its rang error reduction. From the simulated results it can be numerically explained that the possibility of adaptation of 1D CCM concept to Korean artillery munitions.

• Journal of Engineering Education Research
• /
• v.23 no.6
• /
• pp.40-50
• /
• 2020

This paper proposes learning modules as a kind of integrated instruction model for soft skills program outcomes to enable CEA. Learning modules consist of course learning objectives(outcomes) described in detail, learning content(elements), learning activities(teaching learning methods), evaluation methods, evaluation rubrics so that they can be evaluated based on the performance criteria of the program learning outcomes. The unit of time for the learning module is 50 minutes. If this learning module is applied, it is expected that the soft skill program outcomes can be evaluated in the technical course. As a result of the expert feasibility study, the positive answers were much higher than the negative answers in most of the questions about the composition of the learning module or the method of managing the class.

• Korean Medical Education Review
• /
• v.25 no.3
• /
• pp.212-228
• /
• 2023

Systems thinking, a linking domain of health systems science (HSS), is an approach that investigates specific problems from a holistic perspective. It supports improving patients' health, fulfilling their health needs, and anticipating issues that threaten patient safety within the healthcare system. It also helps solve problems through critical thinking and ref lection. This study aimed to develop an curriculum on systems thinking, explore the effectiveness of the course, and investigate the applicability of HSS education at individual universities. In this study, the ADDIE (Analysis, Design, Development, Implementation, and Evaluation) model was utilized to design, develop, implement, and evaluate an elective course on systems thinking. In the design process, learning outcomes and goals were developed, and educational content, teaching-learning methods, and student evaluation methods were linked. In the development process, class materials and evaluation materials were prepared. In the implementation process, the course was implemented, and the evaluation process analyzed the results of learning performance and curriculum assessments. The evaluation found the following results. First, the students in the study realized the importance of systems thinking and experienced the need for systems thinking through non-medical and medical situations. Second, the students were very satisfied with the learning activities in the course (mean=4.84), and the results of the self-competence evaluation, conducted before and after the course, also showed a significant improvement. This study confirmed the effectiveness of the elective course, and its results can serve as a reference for developing an HSS curriculum.