• 한국재료학회지
• /
• 제22권12호
• /
• pp.682-688
• /
• 2012

In this study we aimed to examine the co-doping effects of 1/6 mol% $Co_3O_4$ and 1/4 mol% $Cr_2O_3$ (Co:Cr = 1:1) on the reaction, microstructure, and electrical properties, such as the bulk defects and the grain boundary properties, of ZnO-$Bi_2O_3-Sb_2O_3$ (ZBS; Sb/Bi = 0.5, 1.0, and 2.0) varistors. The sintering and electrical properties of Co,Cr-doped ZBS, ZBS(CoCr) varistors were controlled using the Sb/Bi ratio. Pyrochlore ($Zn_2Bi_3Sb_3O_{14}$), ${\alpha}$-spinel ($Zn_7Sb_2O_{12}$), and ${\delta}-Bi_2O_3$ were formed in all systems. Pyrochlore was decomposed and promoted densification at lower temperature on heating in Sb/Bi = 1.0 by Cr rather than Co. A more homogeneous microstructure was obtained in all systems affected by ${\alpha}$-spinel. In ZBS(CoCr), the varistor characteristics were improved (non-linear coefficient, ${\alpha}$ = 20~63), and seemed to form ${Zn_i}^{{\cdot}{\cdot}}$(0.20 eV) and ${V_o}^{\cdot}$(0.33 eV) as dominant defects. From impedance and modulus spectroscopy, the grain boundaries were found to be composed of an electrically single barrier (0.94~1.1 eV) that is, however, somewhat sensitive to ambient oxygen with temperature. The phase development, densification, and microstructure were controlled by Cr rather than by Co but the electrical and grain boundary properties were controlled by Co rather than by Cr.

• 센서학회지
• /
• 제6권2호
• /
• pp.155-162
• /
• 1997

zinc acetate를 포함하는 용액으로부터 r-plane 사파이어 기판 위에 ZnO 막(膜)을 증착하였다. 초음파(超音波) 발생기(發生器)로 용액을 진동시켜 증기입자를 만든 후 이것을 고온 반응로(反應盧) 내에서 열분해(熱分解) 시켜 막(膜)을 증착하였다. 제조된 막(膜)의 결정성, 표면형태 및 조성을 XRD, SEM 및 AES로 각각 분석하였다. 기판온도가 막(膜)의 특성에 미치는 영향에 대해 조사하였다. 기판온도 $300^{\circ}C$에서 (110) 방향으로 강하게 성장된 막(膜)을 얻을 수 있었다. 구리의 첨가(添加)와 습식산화(濕式酸化)에 의해 막(膜)의 저항율을 $3{\times}10^{6}{\Omega}{\cdot}cm$이상으로 높일 수 있었다.

• 한국산학기술학회논문지
• /
• 제16권2호
• /
• pp.1555-1562
• /
• 2015

금속 산화물 반도체는 독특한 전기 광학적 특성, 높은 표면적 등으로 인해 태양전지, 센서, 광소자 및 디스플레이 등 여러 분야에 걸쳐 응용되고 있다. 금속 산화물 가운데 우수한 물리 화학적 특성을 가지는 산화아연은 3.37 eV의 넓은 밴드갭 에너지와 60 meV의 큰 엑시톤 결합에너지를 갖는 n-형 반도체로서 산화아연에 양이온을 도핑하여 전기 광학적 특성을 보완하는 연구가 진행되고 있다. 본 연구는 알루미늄이 도핑 된 산화아연을 마이크로파 수열합성법으로 합성하였다. 전구체의 종류와 몰 비 등의 반응 변수를 조절하여 최적의 결정형상과 광학적 특성을 갖는 산화아연을 합성하였으며, 알루미늄을 도핑하여 광학적 특성 변화를 시도하였다. 합성된 입자는 SEM, XRD, PL, UV-Vis 분광기 및 EDS 등의 기기분석을 통해 광학적, 물리 화학적 특성을 확인하였다.

• 한국전기전자재료학회논문지
• /
• 제34권4호
• /
• pp.256-261
• /
• 2021

Indium-doped Mg_0.05Zn_0.95O thin films were deposited on glass substrates by a sol-gel method. Three types of indium precursors such as indium chloride, indium acetate, and indium nitrate were used as doping sources. Physical properties of fabricated thin films were analyzed through XRD (x-ray diffraction), UV-vis spectrophotometer, Hall effect measurement, and EDS (energy dispersive x-ray spectroscopy). All In-doped thin films grown in this study exhibited a preferred orientation of (002) with over 80% transmittance. The results showed that the Mg_0.05Zn_0.95O thin film from indium chloride as the indium precursor has higher crystallinity and transmittance with lower resistivity when compared with those from other indium precursors.

• 한국세라믹학회지
• /
• 제56권5호
• /
• pp.474-482
• /
• 2019

Chromium-doped zinc ferrite nanoparticles with the general formula Cr_yZnFe_2-yO₄ (y = 0, 0.025, 0.05, 0.075, and 0.1) were synthesized by a surfactant-assisted chemical co-precipitation route using metal nitrate salt precursors. The phase purity and structural parameters were determined by powder X-ray diffraction. The concentration of Cr³⁺ doped into ZnFe₂O₄ (ZF) noticeably affected the crystallite size, which was in the range of 22 nm to 36 nm, and all samples showed a single cubic spinel structure without any secondary phase or impurities. The lattice parameter, X-ray density, and skeletal density increased with an increase in the Cr-doping concentration; on the other hand, a decreasing trend was observed for the particle size and porosity. The influence of Cr³⁺ substitution on ZF magnetic properties were studied under an applied field of 15 kOe. The overall results revealed that the incorporation of a small amount of Cr dopant changed the structural, electrical, and magnetic properties of ZF.

• 한국세라믹학회지
• /
• 제37권5호
• /
• pp.491-496
• /
• 2000

Single phae Pb(Mg1/3Nb2/3)O3-based solid solutions, the Mg2+ of which are replaced by 20mol% of Ni2+, Zn2+, Cd2+, and the Pb2+ of which are replaced by 0∼20 mol% of La3+, were synthesized and their ordering structures of B-site cations were investigated by XRD and TEM. The B'-site cations (Mg2+, Ni2+, Zn2+, Cd2+) are disordered while these B'-site cations and the B"-site cations (Nb5+) are nonstoichiometrically 1:1 ordered within the ordered nano-domains dispersed in the Nb5+-rich disordered matrix. The charge imbalance between the B'-rich ordered nano-domains and the B"-rich disordered matrix are compensated by the doping of electron donor such as La3+, which enhances the degree of nonstoichiometric 1:1 ordering. For a given La3+ content, the degree of nonstoichiometric 1:1 ordering increases as the average ionic size difference between the B'-and B"-site cations increases, Ni2+

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.168-168
• /
• 2012

Al doped ZnO (AZO)는 태양전지, 평판 디스플레이, OELD 등 광전자 소자에 적용되는 투명전도막용 재료인 ITO의 대체 재료로서 최근에 가장 각광받고 있는 물질이다. 하지만, $2.5{\times}10^{-4}{\Omega}{\cdot}cm$의 낮은 비저항과 90% 이상의 투과도를 갖는 ITO의 비해 AZO의 특성은 아직 부족한 상황이다. 수십 년간 많은 연구자들에 의해 다양한 제조 방법과 공정 조건들로 전기적, 광학적 특성을 향상시키기 위한 노력들이 진행되어 왔다. 하지만 실리콘 반도체와는 달리 II-VI족 물질의 정확한 근본적인 원리는 아직 불분명한 상태이다. 지금까지 AZO의 특성 향상의 원인을 결정립 크기, 주상구조의 우선 방위, 결정성, Zn-O 구조내의 산소 결핍 등의 메커니즘으로 설명해 왔다. 하지만, 본 연구에서는 지금까지 제안된 상기 요인의 변화 없이 전기적, 광학적 특성을 향상시키는 것이 짧은 열처리만으로도 가능했다. AZO 박막의 전기적, 광학적 특성에 큰 영향을 미치는 보다 근본적인 원인은 도핑 효율이다. ZnO 내에 도핑된 Al의 양보다 실제로로 활성화된 Al의 비율을 올리는 것이 중요하다. 본 연구에서 구조적, 조성적 변화 없이 도핑효율을 8.9%에서 66.7%까지 증가시켰으며, 이동도는 박막 표면의 및 결정립계 사이의 과잉산소를 줄임으로서 optical phonon scattering 감소를 통하여 증가시킬 수 있고, 이러한 과잉산소의 감소는 deep level emission을 감소시킴으로서 투과도 증가에도 영향을 준다. 본 연구에서 짧은 열처리를 통해 구조적 변화 없이 도핑효율의 증가만으로 $4.8{\times}10^{-4}{\Omega}{\cdot}cm$의 비저항과 90%의 투과도를 갖는 AZO 박막을 제조하였다.

• Transactions on Electrical and Electronic Materials
• /
• 제12권5호
• /
• pp.200-203
• /
• 2011

In this research, nitrogen (N)-doped zinc oxide (ZnO) thin films have been grown on a sapphire substrate by dielectric barrier discharge (DBD) in pulsed laser deposition (PLD). DBD has been used as an effective way for massive in-situ generation of N-plasma under conventional PLD process conditions. Low-temperature photoluminescence spectra of N-doped ZnO thin films provided near-band-edge emission after a thermal annealing process. The emission peak was resolved by Gaussian fitting and showed a dominant acceptor-bound excitation peak ($A^{\circ}X$) that indicated acceptor doping of ZnO with N. The acceptor binding energy of the N acceptor was estimated to be approximately 145 MeV based on the results of temperature-dependent photoluminescence (PL) measurements.

• Journal of Electrochemical Science and Technology
• /
• 제9권2호
• /
• pp.118-125
• /
• 2018

Herein we report on the selective synthesis and direct growth of nanostructures using an aqueous chemical growth route. Specifically, Al-doped ZnO (AZO) nanoflakes (NFs) are vertically grown on indium tin oxide (ITO) coated flexible polyethylene terephthalate (PET) sheets at low temperature and ambient environment. The morphological, optical, and electrical properties of the NFs are investigated as a function of the Al content. Furthermore, these AZO-NFs are integrated into perovskite solar devices as the electron transport layer (ETL) and the fabricated devices are tested for photovoltaic performance. It was determined that the doping of AZO-NFs significantly increases the performance metrics of the solar cells, mainly by increasing the short-circuit current of the devices. The observed enhancement is primarily attributed to the improved conductivity of the doped AZO-NF, which facilitates charge separation and reduces recombination. Further, our flexible solar cells fabricated through this low temperature process demonstrate an acceptable reproducibility and stability when exposed to a mechanical bending test.

• Journal of Ceramic Processing Research
• /
• 제20권1호
• /
• pp.80-83
• /
• 2019

The Mn4+-activated Li2ZnSn2O6 (LZSO:Mn4+) red phosphors were synthesized by the solid-state reaction at temperatures of 1100-1400 ℃ in air. The synthesized LZSO:Mn4+ phosphors were confirmed to have a single hexagonal LZSO phase without the presence of any secondary phase formed by the Mn4+ addition. With near UV and blue excitation, the LZSO:Mn4+ phosphors exhibited a double band deep-red emission peaked at ~658 nm and ~673 nm due to the 2E → 4A2 transition of Mn4+ ion. PL emission intensity showed a strong dependence on the Mn4+ doping concentration and the 0.3 mol% Mn4+-doped LZSO phosphor produced the strongest PL emission intensity. Photoluminescence emission intensity was also found to be dependent on the calcination temperature and the optimal calcination temperature for the LZSO:Mn4+ phosphors was determined to be 1200 ℃. Dynamic light scattering (DLS) and field-effect scanning electron microscopy (FE-SEM) analysis revealed that the 0.3 mol% Mn4+-doped LZSO phosphor particles have an irregularly round shape and an average particle size of ~1.46 ㎛.