• 한국전기전자재료학회논문지
• /
• 제34권6호
• /
• pp.454-460
• /
• 2021

In this work, we synthesized alloy-core InZnP quantum dots, which are more efficient than single-core InP quantum dots, using a solution process method. The effect of synthesis conditions of alloy core on optical properties was investigated. We also investigated the conditions that make up the gradient shell to minimize defects caused by lattice mismatch between the InZnP core and ZnS is 7.7%. The stable synthesis temperature of the InZnP alloy core was 200℃. Quantum dots consisting of three layered ZnSe gradient shell and single layered ZnS exhibited the best optical property. The properties of quantum dots synthesized in 100 ml and in 2,000 ml flasks were almost equal.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
• /
• pp.304-308
• /
• 2004

The $Cd_{1-x}Zn_xS$ thin films were grown on the Si(100) wafers by a hot wall epitaxy method(HWE). The source and substrate temperature are $600^{\circ}C\;and\;440^{\circ}C$ respectively. The crystalline structure of epilayers was investigated by double crystal X-ray diffraction(DCXD). Hall effect on the sample was measured by the van der Pauw method and studied on the carrier density and mobility dependence on temperature. In order to explore the applicability as a photoconductive cell, we measured the sensitivity($\gamma$), the ratio of photocurrent to darkcurrent(pc/dc), maximum allowable power dissipation(MAPD), spectral response and response time. The results indicated that the photoconductive characteristic were the best for the $Cd_{0.53}Zn_{0.47}S$ samples annealed in Cu vapor compare with in Cd, Se, air and vacuum vapour. Then we obtained the sensitivity of 0.99, the value of pc/dc of $1.65{\times}10^7$, the MAPD of 338mW, and the rise and decay time of 9.7ms and 9.3ms, respectively

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.399-399
• /
• 2011

본 논문에서는 Indium tin oxide (ITO) 투명전극의 성장온도($T_G$)가 Cu(In,Ga)$Se_2$ (CIGS) 박막태양전지에 미치는 영향을 살펴 보았다. ITO 박막은 radio-frequency magnetron sputtering을 이용하여 상온에서 $350^{\circ}C$까지의 다양한 $T_G$ 조건에서 i-ZnO/ glass와 i-ZnO/CdS/CIGS/Mo/glass 기판에 증착되었다. ITO의 비저항과 CdS/CIGS 계면 특성은 $T_G$에 크게 영향을 받았다. $T_G{\leq}200^{\circ}C$에서는 $T_G$가 증가할수록 ITO 저항이 감소하였고 이에 따른 series 저항 감소가 태양전지 성능 향상에 기여하였다. 하지만 $T_G$ > $200^{\circ}C$에서는 CdS 버퍼층의 Cd이 CIGS 층으로 확산되어 소자의 p-n 계면이 파괴되는 것을 발견하였다. $T_G=200^{\circ}C$에서 ITO를 증착한 CIGS 태양전지의 경우 가장 높은 광전변환효율을 보였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.86.2-86.2
• /
• 2015

Cu2ZnSn(S,Se)4 thin film solar cells have been fabricated using sputtered Cu/Sn/Zn metallic precursors on Mo coated sodalime glass substrate without using a toxic H2Se and H2S atmosphere. Cu/Sn/Zn metallic precursors with various thicknesses were prepared using DC magnetron sputtering process at room temperature. As-deposited metallic precursors were sulfo-selenized inside a graphite box containing S and Se pellets using rapid thermal processing furnace at various sulfur to selenium (S/Se) compositional ratio. Thin film solar cells were fabricated after sulfo-selenization process using a 65 nm CdS buffer, a 40 nm intrinsic ZnO, a 400 nm Al doped ZnO, and Al/Ni top metal contact. Effects of sulfur to selenium (S/Se) compositional ratio on the microstructure, crystallinity, electrical properties, and cell efficiencies have been studied using X-ray diffraction, Raman spectroscopy, field emission scanning electron microscope, I-V measurement system, solar simulator, quantum efficiency measurement system, and time resolved photoluminescence spectrometer. Our fabricated Cu2ZnSn(S,Se)4 thin film solar cell shows the best conversion efficiency of 9.24 % (Voc : 454.6 mV, Jsc : 32.14 mA/cm2, FF : 63.29 %, and active area : 0.433 cm2), which is the highest efficiency among Cu2ZnSn(S,Se)4 thin film solar cells prepared using sputter deposited metallic precursors and without using a toxic H2Se gas. Details about other experimental results will be discussed during the presentation.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.459.1-459.1
• /
• 2014

Because both $TiO_2$ and ZnO has superior characteristic optically and electrically, there are various of research for these materials. However, they have large band gap energy which correspond with not visible light, but UV light. To make up for this disadvantage, Quantum dots (CdS, CdSe) which can absorb the visible light could be deposited on $ZnO/TiO_2$ nanostructure so that the the photoelectrochecmical cell can absorb the light that has larger region of wavelength. Both $TiO_2$ and ZnO can be grown to one-dimensional nanowire structure at low temperature through solutional method. Three-dimensional hierarcical $ZnO/TiO_2$ nanostructure is fabricated by applying these process. Large surface area of this structure make the light absorbed more efficiently. Through type 2 like-cascade energy band structure of nanostructure, the efficient separation of electron-hole pairs is expected. Photoelectrochemical charateristics are found by using these nanostructure to photoelectrode.

• 한국전기전자재료학회논문지
• /
• 제30권10호
• /
• pp.625-630
• /
• 2017

ZnS was chemically deposited as a buffer layer alternative to CdS, for use as a Cd-free buffer layer in $Cu(In_{1-x}Ga_x)Se_2$ (CIGS) solar cells. The deposition of a thin film of ZnS was carried out by chemical bath deposition, following which the structural and optical properties of the ZnS layer were studied. For the experiments, zinc sulfate hepta-hydrate ($ZnSO_4{\cdot}7H_2O$), thiourea ($SC(NH_2)_2$), and ammonia ($NH_4OH$) were used as the reacting agents. The mole concentrations of $ZnSO_4$ and $SC(NH_2)_2$ were fixed at 0.03 M and 0.8 M, respectively, while that of ammonia, which acts as a complexing agent, was varied from 0.3 M to 3.5 M. By varying the mole concentration of ammonia, optimal values for parameters like optical transmission, deposition rate, and surface morphology were determined. For the fixed mole concentrations of $0.03M\;ZnSO_4{\cdot}7H_2O$ and $0.8M\;SC(NH_2)_2$, it was established that 3.0 M of ammonia could provide optimal values of the deposition rate (5.5 nm/min), average optical transmittance (81%), and energy band gap (3.81 eV), rendering the chemically deposited ZnS suitable for use as a Cd-free buffer layer in CIGS solar cells.

• Journal of the Optical Society of Korea
• /
• 제10권4호
• /
• pp.184-187
• /
• 2006

For resonant excitation of the ground state $1s^e-1S^h_{3/2}$, dynamics of 'the electron-hole pair in a CdSe quantum dot was investigated by degenerate pump-probe measurement. At low e-h pair densities, the decay of $1s^e-1S^h_{3/2}$ state is dominated by radiative recombination. As the number of the electron-hole pairs increases, new decay features become significant. Theoretical comparison suggests this is attributed to the bi-molecular and Auger-type scattering.

• 해양환경안전학회지
• /
• 제20권5호
• /
• pp.504-510
• /
• 2014

본 연구에서는 2014년 03월에 인천 H항의 5개 정점(S1~S5)에서 채취된 표층 퇴적물의 물리화학적 특성을 조사하고, COD, AVS, IL 및 중금속(Cd, Cu, Ni, Pb, Zn, Cr, Hg)을 분석하여 오염도를 평가하였다. 입도분석, 비표면적분석, XRD 및 XRF 분석을 통하여 채취된 퇴적물 시료 모두 거의 동일한 산화물과 광물로 구성되었음을 확인하였다. 국내기준으로 COD, AVS 및 IL 세 항목의 총점에 대한 오염도는 S2, S3, S5 지점은 2등급으로 S1, S4 지점은 3등급으로 평가되었다. 중금속 오염의 경우 Cd, Ni, Pb은 USEPA 기준으로 중간오염에 해당하였고, Cu, Zn 및 Cr은 심한오염으로 분류되었다. 농집지수를 이용한 오염도 평가결과 Cd가 Class 3으로 평가되었고, 농축계수를 이용한 평가결과 모든 지점에서 Cd, Pb, Zn의 경우 1보다 큰 것으로 나타났다. 또한 총농축계수는 S4지점이 3.1로 가장 높은 것으로 나타났다.

• 한국환경과학회지
• /
• 제26권7호
• /
• pp.847-858
• /
• 2017

For 26 soil series distributed more than 1% among 63 soil series in Jeju Island, natural uncultivated soil samples were collected. For these soils, the chemical speciation of eight heavy metals (Cd, Cr, Cu, Mn, Ni, Pb, V, and Zn) was examined. Further, the Plant Bioavailability (PB) and Mobility Factor (MF) of these heavy metals were evaluated using Tessier's 5-step sequential extraction method (exchangeable, carbonate, reducible (bound to Fe/Mn oxides), oxidizable (bound to organic matter), and residual fraction). The main form present was residual fraction for Cd and Zn; residual and oxidizable fractions for Cr, Cu, Ni, and Pb; reducible fraction for Mn; and carbonate fraction for V. The average plant availability and average mobility factor were found to be V (57.37%) > Zn (12.49%) > Cd (11.76%) > Cu (11.19%) > Pb (9.37%) > Cr (9.09%) > Mn (3.13%) > Ni (2.63%), and Mn (61.04%) > V (59.94%) > Zn (31.54%) > Cd (17.65%) > Cr (15.66%) > Ni (13.89%) > Pb (13.80%) > Cu (13.53%), respectively.

• 한국재료학회지
• /
• 제30권8호
• /
• pp.421-425
• /
• 2020

A transparent quantum dot (QD)-based light-emitting diode (LED) with silver nanowire (Ag NW) and indium-tin oxide (ITO) hybrid electrode is demonstrated. The device consists of an Ag NW-ITO hybrid cathode (-), zinc oxide, poly (9-vinylcarbazole) (PVK), CdSe/CdZnS QD, tungsten trioxide, and ITO anode (+). The device shows pure green-color emission peaking at 548 nm, with a narrow spectral half width of 43 nm. Devices with hybrid cathodes show better performances, including higher luminance with higher current density, and lower threshold voltage of 5 V, compared with the reference device with a pure Ag NW cathode. It is worth noting that our transparent device with hybrid cathode exhibits a lifetime 9,300 seconds longer than that of a device with Ag NW cathode. This is the reason that the ITO overlayer can protect against oxidization of Ag NW, and the Ag NW underlayer can reduce the junction resistance and spread the current efficiently. The hybrid cathode for our transparent QD LED can applicable to other quantum structure-based optical devices.