• 한국진공학회지
• /
• 제15권5호
• /
• pp.541-546
• /
• 2006

본 연구에서는 박막형 $ZnGa_2O_4:Mn$ 산화물 형광체의 음극선루미느센스 특성과 구조적 성질에 대하여 field emission scanning electron microscopy (FESEM), atomic force microscopy (AFM), photoluminescence (PL), 그리고 cathodoluminescence (CL) 방법을 이용하여 조사하였다. $ZnGa_2O_4:Mn$ 형광체 타겟으로부터 $Mn^{2+}$ 이온의 $^4T_1{\rightarrow}^6A_1$ 전이에 의한 506nm 파장에서의 PL emission 스펙트럼이 관찰되었다. 색좌표는 x = 0.09, y = 0.67 이었다. $ZnGa_2O_4:Mn$ 박막의 여기 스펙트럼은 $Mn^{2+}$ 이온 흡수에 의한 294 nm의 피크 파장을 나타내었다. 낮은 압력에서 증착한 $ZnGa_2O_4:Mn$ 형광체 박막은 고밀도의 치밀한 단면구조를 보였고, 높은 세기의 음극선루미느센스가 505 nm 피크 파장에서 나타났다. 표면 거칠기가 음극선루미느센스의 세기에 미치는 영향은 관찰되지 않았다.

• 한국재료학회지
• /
• 제29권7호
• /
• pp.432-436
• /
• 2019

Zinc oxide(ZnO) micro/nanocrystals are grown via thermal evaporation of ZnO powder mixed with Mn powder, which is used as a reducing agent. The ZnO/Mn powder mixture produces ZnO micro/nanocrystals with diverse morphologies such as rods, wires, belts, and spherical shapes. Rod-shaped ZnO micro/nanocrystals, which have an average diameter of 360 nm and an average length of about $12{\mu}m$, are fabricated at a temperature as low as $800^{\circ}C$ due to the reducibility of Mn. Wire-and belt-like ZnO micro/nanocrystals with length of $3{\mu}m$ are formed at $900^{\circ}C$ and $1,000^{\circ}C$. When the growth temperature is $1,100^{\circ}C$, spherical shaped ZnO crystals having a diameter of 150 nm are synthesized. X-ray diffraction patterns reveal that ZnO had hexagonal wurtzite crystal structure. A strong ultraviolet emission peak and a weak visible emission band are observed in the cathodoluminescence spectra of the rod- and wire-shaped ZnO crystals, while visible emission is detected for the spherical shaped ZnO crystals.

• 자원리싸이클링
• /
• 제9권5호
• /
• pp.11-15
• /
• 2000

The sample made of $Mn_3O_4$ indicated an excellent frequency dependency for intial permeability and core loss. Moreover the homogeneity of cation configuration in he spinel structure was confirmed by X-ray diffraction analysis. The result of homogeneity of the spinel structural coincided with the analytical results of temperature dependence of magnetization. Furthermore, the influence of manganese oxide as starting material, on homogeneity of spinel structure was examined by using thermogravimetry-differential thermal analysis. It may be concluded that the reaction between $Mn_3O_4$ and Fe-Zn oxide mixture proceeds at fist in all combination of manganese oxide and oxie mixture, and then Mn-Zn-Fe spinel was formed.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2000년도 추계학술대회논문집
• /
• pp.93-96
• /
• 2000

In this study, we investigated the electromagnetic properties of Mn-Zn ferrite doped with rare earth oxide (Dy$_2$O$_3$, Er$_2$O$_3$). The main composition is 52mo1% $\alpha$-Fe$_2$O$_3$, 25mo1% Mn$_3$O$_4$23mo1% ZnO and doped with them(0.05wt%~0.25wt%, step:0.05wt%). An experimental process has advanced by conventional ferrimagnetism manufacturing that was prepared by standard ceramic techniques. The XRD pattern of all doped sample were observed spinel and secondary phase. The density of sample were measured nearly constant value. As increased the additive, resistivity, initial permeability and real component of the series complex permeability increased with setting limits each other. In case of Mn-Zn ferrite excess doped with them, resistivity, initial permeability and real component of the series complex permeability decreased and magnetic loss increased in proportion to increasing the additive.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.93-96
• /
• 2000

In this study, we investigated the electromagnetic properties of Mn-Zn ferrite doped with rare earth oxide (Dy$_2$O$_3$, Er$_2$O$_3$). The main composition is 52mo1% ${\alpha}$-Fe$_2$O$_3$, 25mol% Mn$_3$O$_4$ 23mo1% ZnO and doped with them(0.05wt% ∼ 0.25wt%, step:0.05wt%). An experimental process has advanced by conventional ferrimagnetism manufacturing that was prepared by standard ceramic techniques. The XRD pattern of all doped sample were observed spinel and secondary phase. The density of sample were measured nearly constant value. As increased the additive, resistivity, initial permeability and real component of the series complex permeability increased with setting limits each other. In case of Mn-Zn ferrite excess doped with them, resistivity, initial permeability and real component of the series complex permeability decreased and magnetic loss increased in proportion to increasing the additive.

• Corrosion Science and Technology
• /
• 제11권1호
• /
• pp.1-8
• /
• 2012

The development of martensitic grades which can be processed in continuous galvanizing lines requires the reduction of the oxides formed on the steel during the hot dip process. This reduction mechanism was investigated in detail by means of High Resolution Transmission Electron Microscopy (HR-TEM) of cross-sectional samples. Annealing of a martensitic steel in a 10% $H_2+N_2$ atmosphere with the dew point of $-35^{\circ}C$ resulted in the formation of a thin $_{C-X}MnO.SiO_{2}$ (x>1) oxide film and amorphous $_{a-X}MnO.SiO_{2}$ oxide particles on the surface. During the hot dip galvanizing in Zn-0.13%Al, the thin $_{C-X}MnO.SiO_{2}$ (x>1) oxide film was reduced by the Al. The $_{a-X}MnO.SiO_{2}$ (x<0.9) and $a-SiO_{2}$ oxides however remained embedded in the Zn coating close to the steel/coating interface. No $Fe_{2}Al_{5-X}Zn_{X}$ inhibition layer formation was observed. During hot dip galvanizing in Zn-0.20%Al, the $_{C-X}MnO.SiO_{2}$ (x>1) oxide film was also reduced and the amorphous $_{a-X}MnO.SiO_{2}$ and $a-SiO_{2}$ particles were embedded in the $Fe_{2}Al_{5-X}Zn_{X}$ inhibition layer formed at the steel/coating interface during hot dipping. The results clearly show that Al in the liquid Zn bath can reduce the crystalline $_{C-X}MnO.SiO_{2}$ (x>1) oxides but not the amorphous $_{a-X}MnO.SiO_{2}$ (x<0.9) and $a-SiO_{2}$ oxides. These oxides remain embedded in the Zn layer or in the inhibition layer, making it possible to apply a Zn or Zn-alloy coating on martensitic steel by hot dipping. The hot dipping process was also found to deteriorate the mechanical properties, independently of the Zn bath composition.

• 한국세라믹학회지
• /
• 제37권7호
• /
• pp.651-651
• /
• 2000

• 한국전기전자재료학회논문지
• /
• 제29권8호
• /
• pp.470-475
• /
• 2016

In this study, $Zn_xMn_{3-x}O_4$ (x=0.95~1.20) specimens were prepared by using a conventional mixed oxide method. All specimens were sintered in air at $1,200^{\circ}C$ for 12 h and cooled at a rate of $2^{\circ}C/min$ to $800^{\circ}C$, subsequently quenching to room temperature. We investigated the structural and electrical properties of $Zn_xMn_{3-x}O_4$ specimens with variation of ZnO amount for the application of NTC thermistors. As results of X-ray diffraction patterns, all specimens showed the formation of a complete solid solution with tetragonal spinel phase. And, the second phase was observed by the solubility limit of Zn ions in $x{\geq}1.10$ composition. The average grain size was increased from $2.72{\mu}m$ to $4.18{\mu}m$ with increasing the compositional ratio of Zn ion from x=0.95 to 1.20, respectively. $Zn_{1.10}Mn_{1.90}O_4$ specimen showed the minimum electrical resistance of $57.5k{\Omega}$ at room temperature and activation energy of 0.392 eV.

• Corrosion Science and Technology
• /
• 제23권3호
• /
• pp.221-227
• /
• 2024

During hot stamping of hot-dip zinc-coated steel sheets such as hot-dip galvanized steel sheets and hot-dip galvannealed steel sheets, an oxide mainly composed of ZnO is formed on the sheet surface. However, excessive formation of ZnO can lead to a decrease in the amount of metal Zn in the coating layer, decreasing the corrosion resistance of hot-stamped members. Therefore, it is important to suppress excessive formation of ZnO. While the formation of Al oxides and Mn oxides along with ZnO layer during the hot stamping of hot-dip zinc-coated steel sheets can affect ZnO formation, crystal structures of such oxides have not been elucidated clearly. Thus, this study aimed to analyze structures of oxides formed during hot stamping of hot-dip galvannealed steel sheets using transmission electron microscopy. Results indicated the formation of an oxide layer comprising ZnAl₂O₄ at the interface between ZnO and the coating layer with Mn₃O₄ at the outermost of an oxide layer.

• 자원리싸이클링
• /
• 제8권4호
• /
• pp.45-56
• /
• 1999

본 연구의 목적은 불순물들을 다량 함유한 mill scale과 ferro-Mn을 정제과정을 거쳐 불순물들의 함량을 100 ppm 이하로 감소시킨 후 이들을 원료로 사용하여 Mn-Zn ferrite 원료분말을 기존의 고상반응법이 아닌 분무배소 방법에 의해 제조하는데 있다. 이를 위하여 본 연구에서는 정제된 원료용액을 분무배소시킴으로써 고상의 미세한 복합산화물 분말을 형성시키며, 생성된 분말을 효율적으로 포집할 수 있을 뿐 아니라 유해 생성기체를 중화시킬 수 있는 분무배소로 system을 개발하였다. 또한 정제된 원료 용액을 본 연구에서 개발된 분무배소로 내로 투입시킴으로써 Mn-ferrite 및 $Fe_{2}O_{3}$와 $Mn_{2}O_{3}$의 복합산화물 분말을 제조하였으며, 이때 각각의 조건 하에서 생성된 분말들에 대해 조성, 비표면적 및 입도 분포 등의 물리적, 화학적 특성을 조사하였다. 분무 배소법에 의해 생성된 원료분말에 ZnO 및 기타 첨가제를 정해진 조성으로 혼합시킨 후 성형 및 엄격하게 제어된 소결과정에 의해 Mn-Zn ferrite core를 제조하였다. 또한 제조된 core에 대하여 손실값, 초투자율, 잔류자속밀도, 항자력 및 포화자속밀도의 자기적 특성을 측정하였으며, 이 결과들을 바탕으로 Mn-Zn ferrite 원료 분말을 제조하기 위한 분무배소방법의 타당성을 확인하였다.