• Bulletin of the Korean Chemical Society
• /
• 제33권8호
• /
• pp.2523-2528
• /
• 2012

Green phosphors $(Zn_{1-a-b}M_aM^{\prime}_b)_xGa_yS_{x+3y/2}:Eu^{2+}$ (M, M' = alkali earth ions) with x = 2 and y = 2-5 were prepared, starting from ZnO, MgO, $SrCO_3$, $Ga_2O_3$, $Eu_2O_3$, and S with a flux $NH_4F$ using a conventional solidstate reaction. A phosphor with the composition of $(Zn_{0.6}Sr_{0.3}Mg_{0.1})_2Ga_2S_5:Eu^{2+}$ produced the strongest luminescence at a 460-nm excitation. The observed XRD patterns indicated that the optimized phosphor consisted of two components: zinc thiogallate and zinc sulfide. The characteristic green luminescence of the $ZnS:Eu^{2+}$ component on excitation at 460 nm was attributed to the donor-acceptor ($D_{ZnGa_2S_4}-A_{ZnS}$) recombination in the hybrid boundary. The optimized green phosphor converted 17.9% of the absorbed blue light into luminescence. For the fabrication of light-emitting diode (LED), the optimized phosphor was coated with MgO using magnesium nitrate to overcome their weakness against moisture. The MgO-coated green phosphor was fabricated with a blue GaN LED, and the chromaticity index of the phosphor-cast LED (pc-LED) was investigated as a function of the wt % of the optimized phosphor. White LEDs were fabricated by pasting the optimized green (G) and the red (R) phosphors, and the commercial yellow (Y) phosphor on the blue chips. The three-band pc-WLED resulted in improved color rendering index (CRI) and corrected color temperature (CCT), compared with those of the two-band pc-WLED.

• 한국분말재료학회지
• /
• 제29권5호
• /
• pp.370-375
• /
• 2022

Cu-doped ZnSe quantum dots were successfully synthesized in an aqueous solution using an internal doping method. The effects of ligand type, CuSe synthesis temperature, and heating time on Cu-doped ZnSe synthesis were systematically investigated. Of MPA, GSH, TGA, and NAC used as ligands, MPA was the optimal ligand as determined by PL spectrum analysis. In addition, the emission wavelength was found to depend on the synthesis temperature of the internal doping core of CuSe. As the temperature increased, the doping of Cu²⁺ was enhanced, and the emission wavelength band was redshifted; accordingly, the emission peaks moved from blue to green (up to 550 nm). Thus, the synthesis of Cu:ZnSe using internal doping in aqueous solutions is a potential method for ecomanufacturing of color-tuned ZnSe quantum dots for display applications.

• Nuclear Engineering and Technology
• /
• 제56권7호
• /
• pp.2821-2827
• /
• 2024

This investigation developed a novel polyester composite based on the addition of zinc oxide (ZnO) of different sizes. We prepared nine samples Containing different percentages and sizes of ZnO as well as the control sample (Pol-ZnO0). The attenuation factors of Pol-micro ZnO were estimated using Phy-x software, while the HPGe detector and various gamma sources were used to experimentally measure the all-prepared composites. In terms of the two methods for micro composites, good agreement was observed. The linear attenuation coefficient (LAC) of Pol-ZnO20, Pol-ZnO40, and Pol-ZnO60, two more samples one with ZnO nanoparticles instead of microparticles, and the other with half microparticles and half nanoparticles (referenced as 0.5 M + 0.5 N) were determined. For all the Polyester composites and energies, the mixture of microparticles and nanoparticles had greater LAC values than each of the particles on their own. For example, the LAC values for the Pol-ZnO20 polymer at 1.330 MeV are 0.0836, 0.0888, and 0.0903 cm^-1 for the microparticles, nanoparticles, and mixture, respectively. The values of the prepared polymer samples' radiation protection efficiency (RPE) against energy with a thickness of 2 cm was determined experimentally. The Pol-ZnO60 0.5 M + 0.5 N sample has the highest RPE out of all the samples, followed by its nanoparticle counterpart, and then its microparticle counterpart. On the other hand, the Pol-ZnO0 sample, the polymer with no ZnO content, at all energies has the lowest RPE, followed by the three Pol-ZnO20 samples.

• 한국대기환경학회지
• /
• 제16권5호
• /
• pp.431-443
• /
• 2000

The purpose of this experimental study is to investigate seasonal deposition flux variations and deposition velocities of the total dusfall and various inorganic elements in it. Total 41 dustfall and TSP samples were collected from November, 1997 through December, 1998 in Kunsan. Each sample was analyzed by and AAS to determine he levels of 5 inorganic elements: Zn, Cd, Cr, Fe and Pb. Deposition fluxes, soluble/total fractions and deposition velocities for each element were extensively investigated. Estimated dry deposition fluxes of dustfall and elements in Kunsan were in the range of 14.6~48.8(mean 25.6) ton/$\textrm{km}^2$/yr for dustfall, 14.5~72.6(mean 44.1)kg/$\textrm{km}^2$/yr for Zn, 0.9~0.5(mean 3.0) kg/$\textrm{km}^2$/yr for Cd, 2.1~239.2(mean 63.9) kg/$\textrm{km}^2$/yr for Cr, 331.6~1,082.7(mean 873.9) kg/$\textrm{km}^2$/yr for Fe, 5.2~178.4(mean 49.2) kg/$\textrm{km}^2$/yr for Pb, respectively. And the concentra-tion of TSP and elements in Kunsan were 71$\mu\textrm{g}/m^3$ for TSP, $29.9ng/m^3$ for Zn, $0.6ng/m^3$ for Cd, $0.1 ng/m^3$ for Cr, $1,061.0 ng/m^3$ for Fe, $4.0 ng/m^3$ for Pb, respectively. And the estimated deposition velocity of dustfall and elements in Kunsan were 1.13$\times$ 10(sup)-2 cm/sec for dustfall, 4.67$\times$ 10(sup)-2 cm/sec for Zn, 16.92 cm/sec for Cd, 15.69 cm/sec for Cr, 1.72$\times$ 10(sup)-2 cm/sec for Fe, 0.36 cm/sec for Pb, respectively.

• Nuclear Engineering and Technology
• /
• 제54권2호
• /
• pp.456-461
• /
• 2022

Heavy metal pollution is caused due to anthropogenic activities and is considered as a serious environmental problem which endangers human health and environment. The present study deals with biosorption, an eco-friendly technique for the removal of heavy metal Zn(II) from aqueous medium. Various natural materials have been explored for the uptake of metal ions, where most of them are physically or chemically enhanced. Dry cowdung powder (DCP) has been utilized as a low-cost, environmentally friendly humiresin without any pre-treatment, thus demonstrating the concept of Green Chemistry. Batch biosorption studies using ⁶⁵Zn(II) tracer were performed and the impact of different experimental parameters was studied. Results revealed that at pH 6, 94 ± 2% of Zn(II) was effectively biosorbed in 5 min, at 303 K. The process was spontaneous and exothermic, following pseudo-second-order reaction. The mechanism of heavy metal biosorption employing green adsorbent was therefore elucidated in order to determine the optimal method for removing Zn(II) ions. DCP has a lot of potential in the wastewater treatment industry, as seen by its ability to meet 3A's affordability, adaptability, and acceptability criteria. As a result, DCP emerges as one of the most promising challengers for green chemistry and the zero-waste idea.

• 한국결정학회지
• /
• 제13권2호
• /
• pp.63-68
• /
• 2002

PDP(Plasma Display Panel)에 적용하고자 하는 녹색 형광체 Zn/sub 2-x/Mn/sub x/SiO/sub 4/를 고상반응법으로 제작하였다. 소성온도, 열처리분위기의 수소와 질소가스의 비 그리고 Mn의 첨가제 및 co-dopant가 형광체의 특성에 미치는 영향에 대하여 관찰하였다. Mn의 농도 x=0.002로 하여 소성온도 1400℃에서 발광특성이 가장 우수하였고, co-dopant의 영향에서는 Cr/sup 3＋/를 첨가하였을 때 다른 첨가제를 사용하였을 때 보다 발광특성이 향상되는 것이 관찰되었다.

• Journal of Microbiology and Biotechnology
• /
• 제9권5호
• /
• pp.675-678
• /
• 1999

Fibrinolytic protease activity was detected in the fruit body of Pleurotus sajor-caju using a fibrin plate method. Two fibrinolytic activities (FPI and Ⅱ) were found at the regions of 14.5 and 86.0 kDa by using gel-filtration column chromatography. FPⅡ was identified as an alkaline protease, whereas FPⅠ was a neutral protease. Both were inhibited by phenanthrolin and EDTA, suggesting that they are metalloprotease. Inactivated enzyme activities were restored by adding Co/sup 2+/ or Zn/sup 2+/. Iodoacetate inhibited FPⅠ, but not FPⅡ. Both enzymes cleaved B/sub β/ and γ chains of the human fibrinogen. FPⅡ showed a preference to hydrophobic and bulky residues of nitroanilidine compounds as substrates, whereas FPⅠ preferred positively charged residues.

• 청정기술
• /
• 제29권4호
• /
• pp.272-278
• /
• 2023

흡착을 이용한 오염물질 정화 방법에 많은 관심이 집중되고 있으며, 최근에는 바이오차를 이용하여 유기 및 무기오염물질 제거에도 이용할 수 있다는 연구가 진행되고 있다. 특히 폐자원 바이오매스로 폐목재는 바이오매스 재활용 방안이 필요한 상황으로 폐목재를 이용하여 생성된 바이오차를 흡착용량을 증가하기 위한 방법이 필요하다. 저온고압을 이용하여 에너지 소비가 낮고 수분 제거 전처리가 필요없는 열수가압탄화(Hydrothermal Carbonization, HTC)를 이용하여 탄화하여 바이오차를 생성하고, KOH, NaOH, ZnCl₂ 약품을 이용한 화학적 활성화법으로 생성된 바이오차를 약품별 활성화에 따른 요오드 흡착능, 비표면적, 세공크기, 세공부피, 세공분포 및 SEM을 분석하여 흡착특성을 파악하였다. HTC 300℃, 4 hr에서 생성된 바이오차를 KOH, NaOH, ZnCl₂ 약품별로 활성화로 생성된 바이오차 중 요오드흡착능이 높은 바이오차를 선정하여 비표면적, 세공부피, 세공크기 및 세공분포를 분석한 결과, 비표면적은 774~1.387 m²/g으로 활성탄과 같은 높은 비표면적을 나타냈으며, 평균세공크기 21~24 Å 범위의 미세공이 형성되었음을 확인하였다. 또한 SEM 관찰한 결과 활성화에 따라 표면이 일정한 형태의 균일한 세공이 발달되고 세공의 수가 증가하는 것을 확인할 수 있었다.

• Mass Spectrometry Letters
• /
• 제6권1호
• /
• pp.7-12
• /
• 2015

In the present study, we proposed a simple ESI-MS model for determining $Zn^{2+}$ binding (or dissociation) constants for zinc finger peptides (ZFPs) with a unique ${\beta}{\beta}{\alpha}$ fold consensus. The ionization efficiency (response) factors for this model, i.e., ${\alpha}$ and ${\beta}$, could be determined for ZiCo ZFP with a known $Zn^{2+}$ binding constant. We could determine the binding constants for other ZFPs assuming those with a ${\beta}{\beta}{\alpha}$ consensus conformation have the same ${\alpha}/{\beta}$ response ratio. In general, the ZPF dissociation constants exhibited $K_d$ values of $10^{-7}{\sim}10^{-9}M$, while $K_d$ values for a negative control non-specific $Zn^{2+}$ peptides were high, e.g., $5.5{\times}10^{-6}M$ and $4.3{\times}10^{-4}M$ for BBA1 and melittin, respectively.

• 한국어병학회지
• /
• 제35권1호
• /
• pp.77-92
• /
• 2022

Aquaculture development is based on the ideas of increasing production while reducing economic losses. Bacterial diseases are the leading source of fish cases. Citrobacter freundii has been linked to septicemia and mortality all over the world. In the current study, the cause of mortality in O. niloticus was C. freundii MW279218. External hemorrhages were seen on the affected fish, as well as paleness in the liver and kidney congestion. C. freundii MW279218 had a median lethal dosage of 1.5×10⁵ CFU/mL. Zinc oxide and zinc oxide nanoparticles (ZnO-NPs) were tested for their biocidal effectiveness against C. freundii MW279218. The lethal effect of ZnO-NPs for C. freundii MW279218 was 100% when compared to zinc oxide compound, and the inhibition zone width was 2.31.1mm at the highest tested concentrations (70 mg/L) compared to the lowest (35 and 45 mg/L, respectively). Fish were fed three different diets for 28 days: diet 1 (no additives), diet 2 (100 mg of ZnO-NPs/kg of feed), and diet 3 (200 mg of ZnO-NPs/kg of feed). Organs were also collected for histopathology 96 hours after injection (P<0.05). In the groups given 200 mg of ZnO-NPs, there was 10% mortality and 80% RPS. The group fed 100 mg of ZnO-NPs/kg, on the other hand, had 20% mortality and 60% RPS, compared to 50% mortality in the control positive group. Histopathological examinations demonstrated significant alterations in the control positive group and mild lesions in the hepatopancreas of the groups administered 100 mg ZnO-NPs/kg of feed. The groups fed 200 mg of ZnO-NPs/kg diet, on the other hand, showed no histological alterations. ZnO-NPs were found to be effective in the up regulation of both IL-10 and complement 5 immune-related genes.