• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07a
• /
• pp.172-175
• /
• 2003

ZnO:Al thin film for application to FBAR's bottom electrode using ZnO piezoelectric thin film were prepared by FTS, in order to improve the crystallographic properties of ZnO thin films because the ZnO:Al thin film and ZnO thin films structure is equal each other. So we prepared the ZnO:Al thin film with oxygen gas flow rate. Thickness and c-axis preferred orientation and electric properties of ZnO:Al bottom electrode were evaluated by $\alpha$-step, XRD and 4-point probe..

• Journal of the Optical Society of Korea
• /
• v.18 no.4
• /
• pp.307-316
• /
• 2014

Improved power conversion efficiency of hybrid solar cells with ITO/ZnO seed layer/ZnO NRs/ZnS QDs/P3HT/PCBM/Ag structure was obtained by optimizing the growth period of ZnO nanorods (NRs). ZnO NRs were grown using a hydrothermal method on ZnO seed layers, while ZnS quantum dots (QDs) (average thickness about 24 nm) were fabricated on the ZnO NRs by the successive ionic layer adsorption and reaction (SILAR) technique. Morphology, crystalline structure and optical absorption of layers were analyzed by a scanning electron microscope (SEM), X-ray diffraction (XRD) and UV-Visible absorption spectra, respectively. The XRD results implied that ZnS QDs were in the cubic phase (sphalerite). Other experimental results showed that the maximum power conversion efficiency of 4.09% was obtained for a device based on ZnO NR10 under an illumination of one Sun (AM 1.5G, $100mW/cm^2$).

• Transactions on Electrical and Electronic Materials
• /
• v.4 no.6
• /
• pp.13-16
• /
• 2003

Mn-doped $ZnGa_{2}O_{4}$:$Mn^{2+}$ (M=S, Se) thin film phosphors have been grown using a pulsed laser deposition technique under various growth conditions. The structural characterization carr~ed out on a series of $ZnGa_{2}O_{4}$:$Mn^{2+}$ (M=S, Se) films grown on MgO(l00) substrates usmg Zn-rich ceramic targets. Oxygen pressure was varied from 50 to 200 mTorr and Zn/Ga ratio was the function of oxygen pressure. XRD patterns showed that the lattice constants of the $ZnGa_{2}O_{4}$:$Mn^{2+}$ (M=S, Se) thin film decrease with the substitution of sulfur and selenium for the oxygen in the $ZnGa_2O_4$. Measurements of photoluminescence (PL) properties of $ZnGa_{2}O_{4}$:$Mn^{2+}$ (M=S, Se) thin films have indicated that MgO(100) is one of the most promised substrates for the growth of high quality $ZnGa_2O_{4-x}M_{x}$:$Mn^{2+}$ (M=S, Se) thin films. In particular, the incorporation of Sulfur or Selenium into $ZnGa_2O_4$ lattice could induce a remarkable increase in the intensity of PL. The increasing of green emission intensity was observed with $ZnGa_2O_{3.925}Se_{0.075}:$Mn^{2+}$ and $ZnGa_2O_{3.925}S_{0.05}$:$Mn^{2+}$ films, whose brightness was increased by a factor of 3.1 and 1.4 in comparison with that of $ZnGa_{2}O_{4}$:$Mn^{2+}$ films, respectively. These phosphors may promise for application to the flat panel displays.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.189-189
• /
• 2010

ZnO nanorods 구조는 광소자 및 태양광 소자의 성능을 향상시키기 위해서 무반사계수, 광추출효율, 전기적, 열적 전도도를 개선시킬 수 있어, 매우 큰 관심을 가지고 왔다. 또한 Ag 나노입자는 표면 플라즈몬 효과를 이용하여 LED나 태양전지에 응용하여 소자의 성능이 향상됨을 이론적, 실험적으로 증명되어 왔으며, 현재에도 활발한 연구가 진행되고 있다. 이러한 ZnO nanorods 특성과 Ag 나노입자의 표면 플라즈몬 효과를 이용하기 위해서, 본 연구에서는 Ag 나노 입자를 형성된 ZnO seed층에 ZnO nanorods를 성장시켰다. 시료를 제작을 위해서 비교적 성장이 간단하고 저온성장이 가능한 화학적 합성방법을 이용하였다. Ag 나노입자가 형성된 ZnO seed층 제작을 위해서 먼저 Si 기판위에 RF magnetron 스퍼터를 이용하여 고진공, $N_2$ 분위기에서 일정한 두께로 증착을 하였으며, 이후 Ag 박막을 thermal evaporator로 10 nm 두께로 증착하였다. 그 다음, 크기가 다른 Ag 나노입자를 형성을 위해서 rapid thermal annealing (RTA)을 여러 가지 온도에서 수행하였다. 그리고 이러한 시료들를 이용하여, ZnO nanorods를 성장하기 위하여, $90-95^{\circ}$의 온도에서 zinc nitrate $Zn(NO_3)_2{\cdot}6H_2O$과 hexamethylentetramines (HMT)으로 혼합된 용액에 담가두어 ZnO nanorods를 성장시켰다. Ag 나노입자의 크기에 따라 ZnO nanorods의 구조와 형태에 대하여 어떠한 영향을 주는지를 관찰하기 위해 field emission scanning electron microscopy (FE-SEM)을 이용하여 측정하였으며, Ag와 ZnO의 성분분석과 결정성을 조사하기 위해 X-ray diffraction (XRD)을 이용하여 분석하였다. 그리고 표면 플라즈몬에 의한 영향에 대하여 조사하기 위해, ZnO nanorods와 Ag 나노입자가 형성된 ZnO nanorods를 UV-Vis-NIR spectrophotometer을 이용하여 흡수계수와 반사계수를 비교하여 측정하였으며. 태양전지의 성능향상을 수 있음을 이론적으로 계산하였다. 그리고 또한 photoluminescence (PL) 분석을 수행하여 ZnO nanorods의 구조에 대하여 Ag 나노입자의 영향에 대한 광특성을 측정하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.217-217
• /
• 2010

산화물유전체/금속/산화물유전체(D/M/D) 구조의 투명전극은 우수한 통전성과 투광성을 갖는 동시에 근적외선 및 전자파 차폐가 가능하여 각종 디스플레이 장치로의 응용을 위해 많은 연구가 진행 중이다. 이러한 구조의 다층막의 경우 금속층과 산화물층간 계면에서의 산소확산으로 인한 광학적, 전기적 특성 저하가 문제가 되고 있다. 본 연구에서는 층간 산소확산방지를 통해 다층막의 전기적 특성을 개선하기 위해 $TiO_2$/Ag/$TiO_2$, $TiO_2$/ZnS/Ag/ZnS/$TiO_2$ 구조의 다층막을 DC/RF 마그네트론 스퍼터를 이용하여 제조하여 ZnS 박막이 다층막의 특성에 미치는 영향을 비교 평가하였다. 제조된 박막의 전기적, 광학적, 계면 특성을 4-point probe, Spctrophotometer, AES을 이용하여 분석하였으며 PDP필터용 전극으로의 적용 가능성을 평가하였다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.2
• /
• pp.110-113
• /
• 2012

ZnO crystals with a baseball bat shape were synthesized without any catalysts through a simple thermal oxidation of ZnS powder in alumina crucible under air atmosphere. SEM images demonstrated that the bat structure was composed of two pieces of ZnO crystals, i.e hexagonal-shaped rod and inverted cone-shaped rod. X-ray diffraction (XRD) pattern revealed that the ZnO crystals had wurtzite hexagonal structure. Energy dispersive X-ray (EDX) spectrum showed that the ZnO was of high purity. A strong green emission peak at 510 nm was observed in cathodoluminescece spectrum.

• Journal of the Korean Magnetics Society
• /
• v.12 no.5
• /
• pp.195-200
• /
• 2002

Low temperature sintering of Co$_2$Z type Ba ferrites with various oxide additives has been studied. Co$_2$Z phase was obtained by 2 step calcination and XRD peaks showed a good agreement with the peaks of the standard Co$_2$Z phase, except for some minor extra peaks. ZnO-B$_2$O$_3$ glass, ZnO-B$_2$O$_3$ and CuO, ZnO-B$_2$O$_3$ and Bi$_2$O$_3$, and ZnO-Bi$_2$O$_3$ glass were added to lower sintering temperatures. Specimens were sintered at the temperature range between 900 $^{\circ}C$ and 1000 $^{\circ}C$. In the single addition of ZnO-B$_2$O$_3$ glass, the specimen with 7.5 wt％ showed the highest shrinkage. Specimens with complex addition of ZnO-B$_2$O$_3$ glass with CuO or Bi$_2$O$_3$ showed higher shrinkages and initial permeabilities than single addition of ZnO-B$_2$O$_3$ glass. Shrinkages and initial permeabilities of the specimens with ZnO-Bi$_2$O$_3$ glass were higher than those of ZnO-B$_2$O$_3$ glass addition.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.1106-1110
• /
• 2003

The electrical characteristics of $A{\sim}C's$ ZnO varistors fabricated according to variable sintering condition, which sintering temperature is $l130^{\circ}C$ and speeds of pusher are A: 2mm/min, B: 4mm/min, C: 6 mm/min, respectively, were investigated. The varistor voltage of $A{\sim}C's$ ZnO varistors sintered at $1130^{\circ}C$ increased in order A < B $A{\sim}C's$ ZnO varistors exhibited below 2mA at rated voltage. Lightning impulse residual voltage of A's ZnO varistor suited standard characteristics, which is 3.85kV at 2.5kA, 4.4kV at 5kA and 5.16kV at 10kA. After multi lightning impulse residual voltage test of A's ZnO varistor exhibited good discharge characteristics which ZnO varistor reveals no evidence of puncture, flashover, cracking in visual examination. After high current impulse test of A's ZnO varistor exhibited good discharge characteristics, which variation rate of residual voltage is 0.4% before and after test, and revealed no evidence.

• Korean Journal of Metals and Materials
• /
• v.56 no.12
• /
• pp.900-909
• /
• 2018

A $ZnO/TiO_2$ photocatalyst decorated with PbS quantum dots (QDs) was synthesized to achieve high photocatalytic efficiency for the decomposition of dye in aqueous media. A $TiO_2$ porous layer, as a precursor photocatalyst, was fabricated using micro-arc oxidation, and exhibited irregular porous cells with anatase and rutile crystalline structures. Then, a ZnO-deposited $TiO_2$ catalyst was fabricated using a zinc acetate solution, and PbS QDs were uniformly deposited on the surface of the $ZnO/TiO_2$ photocatalyst using the successive ionic layer adsorption and reaction (SILAR) technique. For the PbS $QDs/ZnO/TiO_2$ photocatalyst, ZnO and PbS nanoparticles are uniformly precipitated on the $TiO_2$ surface. However, the diameters of the PbS particles were very fine, and their shape and distribution were relatively more homogeneous compared to the ZnO particles on the $TiO_2$ surface. The PbS QDs on the $TiO_2$ surface can induce changes in band gap energy due to the quantum confinement effect. The effective band gap of the PbS QDs was calculated to be 1.43 eV. To evaluate their photocatalytic properties, Aniline blue decomposition tests were performed. The presence of ZnO and PbS nanoparticles on the $TiO_2$ catalysts enhanced photoactivity by improving the absorption of visible light. The PbS $QDs/ZnO/TiO_2$ heterojunction photocatalyst showed a higher Aniline blue decomposition rate and photocatalytic activity, due to the quantum size effect of the PbS nanoparticles, and the more efficient transport of charge carriers.

• Korean Journal of Materials Research
• /
• v.18 no.12
• /
• pp.640-644
• /
• 2008

ZnO/ZnS core/shell nanocrystals (${\sim}5-7\;nm$ in diameter) with a size close to the quantum confinement regime were successfully synthesized using polyol and thermolysis. X-ray diffraction (XRD) and high-resolution transmission electron microscopy (HRTEM) analyses reveal that they exist in a highly crystalline wurtzite structure. The ZnO/ZnS nanocrystals show significantly enhanced UV-light emission (${\sim}384\;nm$) due to effective surface passivation of the ZnO core, whereas the emission of green light (${\sim}550\;nm$) was almost negligible. They also showed slight photoluminescence (PL) red-shift, which is possibly due to further growth of the ZnO core and/or the extension of the electron wave function to the shell. The ZnO/ZnS core/shell nanocrystals demonstrate strong potential for use as low-cost UV-light emitting devices.