• International Journal of Aerospace System Engineering
• /
• 제3권1호
• /
• pp.10-16
• /
• 2016

A trigonometric Layerwise higher order shear deformation theory (TLHSDT) is developed and implemented for free vibration and buckling analysis of laminated composite and sandwich plates by analytical and finite element formulation. The present model assumes parabolic variation of out-plane stresses through the depth of the plate and also accomplish the zero transverse shear stresses over the surface of the plate. Thus a need of shear correction factor is obviated. The present zigzag model able to meet the transverse shear stress continuity and zigzag form of in-plane displacement continuity at the plate interfaces. Hence, botheration of shear correction coefficient is neglected. In the case of analytical method, the governing differential equation and boundary conditions are obtained from the principle of virtual work. For the finite element formulation, an efficient eight noded $C^0$ continuous isoparametric serendipity element is established and employed to examine the dynamic analysis. Like FSDT, the considered mathematical model possesses similar number of variables and which decides the present models computationally more effective. Several numerical predictions are carried out and results are compared with those of other existing numerical approaches.

• Steel and Composite Structures
• /
• 제37권2호
• /
• pp.229-251
• /
• 2020

In this paper, dynamic buckling of a smart sandwich nanotube is studied. The nanostructure is composed of a carbon-nanotube with inner and outer surfaces coated with ZnO piezoelectric layers, which play the role of sensor and actuator. Nanotube is under magnetic field and ZnO layers are under electric field. The nanostructure is located in a viscoelastic environment, which is assumed to obey Visco-Pasternak model. Non-local piezo-elasticity theory is used to consider the small-scale effect, and Kelvin model is used to describe the structural damping effects. Surface stresses are taken into account based on Gurtin-Murdoch theory. Hamilton principle in conjunction with zigzag shear-deformation theory is used to obtain the governing equations. The governing equations are then solved using the differential quadrature method, to determine dynamic stability region of the nanostructure. To validate the analysis, the results for simpler case studies are compared with others reported in the literature. Then, the effect of various parameters such as small-scale, surface stresses, Visco-Pasternak environment and electric and magnetic fields on the dynamic stability region is investigated. The results show that considering the surface stresses leads to an increase in the excitation frequency and the dynamic stability region happens at higher frequencies.

• 대한조선학회논문집
• /
• 제57권1호
• /
• pp.52-59
• /
• 2020

This study aims to investigate the bow thruster performance of the research vessel "NARA" by full-scale maneuvering trials. The thruster test method refers to ITTC's recommended procedures and guidelines. Turning tests with the bow thruster are performed at speed conditions of 0, 2, and 4 knots. The test results indicate that the Rate of Turn (ROT) increased when the ship is in a higher speed condition. Due to the position of the propeller and the housing of the bow thruster, there is difference in the efficiency of the bow thruster according to the turning direction. Zigzag tests with the bow thruster were conducted at speed conditions of 2 and 4 knots. At speeds above 4 knots, it seems difficult to change the course only with the bow thruster.

• 대한조선학회논문집
• /
• 제58권6호
• /
• pp.415-423
• /
• 2021

There have been many experimental studies on the manoeuvrability of KRISO Container Ship (KCS). However, the scale ratio of the model ship and the test procedure for each institute are slightly different, so direct comparison for the data is technically difficult to perform. This paper presents the manoeuvrability of the ship with different scale ratios: 1/65.8, 1/42.0, and 1/31.6 in model scale. KRISO conducted Free Running Model Tests (FRMT): 35° turning circle tests and 20/20(10/10) zigzag manoeuvring tests. The test results indicated that advance and tactical diameter in turning circle tests were similar, and overshoot angles in two zigzag manoeuvring tests increased as the model ship size increased. In addition, a basic concept for the FRMT method with an auxiliary X-thrust device was proposed so that the scale effect could be considered in model ship tests.

• Steel and Composite Structures
• /
• 제44권2호
• /
• pp.255-270
• /
• 2022

This manuscript illustrates the dynamic response of nanoscale carbon nanotubes (CNTs) embedded in an elastic media under moving load using doublet mechanics theory, which not considered before. CNTs are modelled by Timoshenko beam theory (TBT) and a bottom to up modelling nano-mechanics is simulated by doublet mechanics theory to capture the size effect of CNTs. To explore the influence of the CNTs configurations on the dynamic behaviour, both armchair and zigzag configurations are considered. The governing equations of motion and the associated boundary conditions are obtained using the Hamiltonian principle. The Navier solution methodology is applied to obtain the solutions for both orientations. Free vibration and forced response under moving loads are considered. The accuracy of the developed procedure is verified by comparing the obtained results with available previous algorithms and good agreement is observed. Parametric studies are conducted to demonstrate effects of doublet length scale, CNTs configurations, moving load velocities as well as the elastic media parameters on the dynamic behaviours of CNTs. The developed procedure is supportive in the design and manufacturing of MEMS/NEMS made from CNTs.

• Advances in nano research
• /
• 제13권3호
• /
• pp.207-216
• /
• 2022

In this paper, a novel model is developed for frequency behavior of single walled carbon nanotubes. The governing equation of motion is constructed method based on the Sander theory using Rayleigh-Ritz's method The frequencies enhances on increasing the power law index using simply supported, clamped and clamped free end conditions. The frequency curve for C-F is less than other conditions. It is due to the physical constraints which are applied on the edge of the CNT. It is observed that the C-F boundary condition have less frequencies from the other two conditions. The frequency phenomena for zigzag are insignificant throughout the aspect ratio. Moreover when index of power law is increased then frequencies increases for all boundary conditions. The natural frequency mechanism for the armchair (10, 10) for various values of power law index with different boundary conditions is investigated. Here frequencies decrease on increases the aspect ratio for all boundary conditions. The frequency curves of SS-SS edge condition is composed between the C-C and C-F conditions. The curves of frequency are less significant from small aspect ratio (L/d = 4.86 ~ 8.47) and decreases fast for greater ratios. It is found that the frequencies via aspect ratios, armchair (10, 10) have higher values from zigzag (10, 0). It is due to the material structure which is made by the carbon nanotubes. The power law index have momentous effect on the vibration of single walled carbon nanotubes. The present frequency result is also compared numerically experimentally with Raman Spectroscopy.

• 대한토목학회논문집
• /
• 제26권4A호
• /
• pp.597-604
• /
• 2006

FRP재료를 이용한 바닥판은 교량생애주기비용 측면에서 재료가 고강도이고 내구성이 우수하여 유지관리를 최소화하고 교체주기가 길게 되므로 경제성이 우수할 것으로 기대되며, 프리캐스트 부재로 가설되므로 시공성이 우수하다. 본 연구에서는 FRP바닥판 시공시 합리적이며 경제적인 강재거더와의 연결방법을 검토하기 위해 연결볼트를 이용한 7가지 기계적 연결지점 조건에 대한 하중재하실험 및 해석을 수행하였다. 실험결과 향후 FRP바닥판과 강재거더 사이의 전단력에 대해 볼트의 강도가 안전측에 있다면 시공시의 효율성 및 경제성을 고려하여 지그재그 체결을 하여도 구조계는 안전할 것으로 평가되었다.

• 한국안전학회지
• /
• 제13권4호
• /
• pp.71-78
• /
• 1998

Real crack and fracture surfaces have irregularities producing zigzag contours. These irregularities are analysed by a fractal geometry which has been by a Mandelbrot. We obtained a fractal dimension which is one of the fractal characteristics. It is also estimated by an vertical section method that fractal characteristics in the fractured surfaces can be obtained as the crack grows. Moreover fractal fracture energy that corresponds to an energy release rate is shown to find relationships between fractal dimensions and crack behaviors. From these results, we concluded that a fractal characteristics analysis for a crack can be applied to a fracture mechanics.

• International Journal of Computer Science & Network Security
• /
• 제22권4호
• /
• pp.73-82
• /
• 2022

This paper shows the hiding process of unlimited secret text size in an image using three methods: the first method is the traditional method in steganography that based on the concealing the binary value of the text using the least significant bits method, the second method is a new method to hide the data in an image based on Exclusive OR process and the third one is a new method for hiding the binary data of the text into an image (that may be grayscale or RGB images) using Exclusive and Huffman Coding. The new methods shows the hiding process of unlimited text size (data) in an image. Peak Signal to Noise Ratio (PSNR) is applied in the research to simulate the results.

• 한국지리정보학회지
• /
• 제25권4호
• /
• pp.32-48
• /
• 2022

공간데이터의 활용 범위와 서비스가 늘어나면서 정밀한 공간데이터를 필요로 하는 기술들이 많아지고 있다. 특히 정밀도로지도는 3차원 공간데이터를 수집, 가공, 처리하는 것이 필수적이며 이를 통해 자율주행 지원이 가능하다. 본 연구에서는 정밀도로지도를 대상으로 대용량의 공간데이터를 효율적으로 저장 및 전송할 수 있는 공간데이터 직렬화 기법을 설계하고 구현하였다. 효율적인 직렬화를 위해 바이너리 형태의 공간데이터 구조를 정의하였으며 Zigzag-Z-order 곡선을 활용하여 정보의 손실 없는 좌표 값 인코딩 기법을 설계하였다. 설계한 공간데이터 직렬화 기법을 정밀도로지도 대상으로 구현 및 적용하여 Protocol buffer, Geobuf와 인코딩 후 데이터 크기, 인코딩/디코딩 속도를 비교하였다. 그 결과 경량화 성능과 인코딩 속도는 모든 유형의 공간데이터에서 설계한 직렬화 방식이 우수한 것을 확인하였다. 하지만 디코딩 속도는 선과 면 유형의 공간데이터에서 다른 직렬화 기법의 성능이 우수하였다. 본 연구를 통해 바이너리 형식의 직렬화 기법으로 공간데이터를 효율적으로 인코딩하여 저장 및 전송할 수 있다는 것을 확인하였다.