• Journal of IKEEE
• /
• v.22 no.2
• /
• pp.476-479
• /
• 2018

This paper proposes a method for reducing the amount of current consumption by the transceiver based remote control and the ZigBee RF4CE network layer step. We have studied how to improve power efficiency at short transition time through duty rate management. Also, comparing the measured current consumption before and after the improvement, we confirmed the correlation between the data transmission speed improvement and the current reduction.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.3
• /
• pp.537-543
• /
• 2012

Smart home System is shirt-sleeve, the automatic control systems, computer network system and network communication technology in the integration of network intelligent home control system. Intelligent household will let users have a more convenient means to management of domestic equipment, for example, through the house, wireless remote control, touch screen phone and Internet or speech recognition control household devices, more can perform scene operation, make more equipment form linkage. In this paper, we propose the intelligent household various kinds of equipment within each other can communication, do not need to user command according to different state interactive operation, thus to bring the greatest degree of user efficient and convenient, comfortable and safe.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.5
• /
• pp.1284-1294
• /
• 2010

The ZigBee is one of the most important technologies for composing USN. It is one of the IEEE 802.15.4 standards to support personal area networks. It uses a hierarchical routing or an on-demand route discovery strategy as an address allocation method. A hierarchical routing doesn't use a routing table but only uses a child node or a parent node as an intermediate node for data delivery. Therefore, the ZigBee network's topology greatly affects the overall network performance. In this paper, we propose a more trustworthy algorithm than only using the depth and widely variable LQI during network formation, and moreover we propose an algorithm to measure network's trustworthiness. We simulate our algorithm using the NS-2 and implement our network using the MG2400 ZigBee module for verifying performance.

• Journal of IKEEE
• /
• v.15 no.4
• /
• pp.287-292
• /
• 2011

The RF4Control stack is used with microcontrollers and IEEE(R) 802.15.4 transceivers. This paper explains the setup and power consumption measurements for the transceiver based remote controller and target node. It is assumed the reader of this paper has knowledge about RF4CE. The current consumption measurements are made using the ZigBee Platform included with the RF4Control stack. he current consumption measurements are presented, and battery life time is calculated for an remote controller. Note that the results presented in this paper are intended as a guideline only. A variety of factors will influence the battery life calculation and final measurements and calculations should be performed on ZigBee RF4CE Certified Platform.

• International journal of advanced smart convergence
• /
• v.10 no.1
• /
• pp.89-96
• /
• 2021

The goal of this study is to develop experiment monitoring system of agriculture fields using ZigBee wireless modules. Soil moisture, ambient temperature, atmospheric pressure and intensity of sunlight are the most important factorsto grow a wheat crop and other vegetables. In orderto monitorthe factorssoil moisture (YL69), air pressure (BMP180), temperature (DS18B20), photoresistor were used for sensing environment data. The TI CC2530 RF SoC chip was used in the system. ZigBee modules were connected to star topology. ZigBee modules send data wirelessly to a data center. This data can be displayed and analyzed on the main monitoring program as needed also sent to the client mobile. Characteristics of the sensors were determined by experiment results.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.5
• /
• pp.980-997
• /
• 2013

Nowadays, wireless communication has a great advantage in technology. We use wireless devices almost in all expected life such as: entertainment, working and recently in the healthcare area, where Wireless Body Area Networks (WBANs) become a hot topic for researchers and system designers. Recent work on WBANs focus on related issues to communication protocol, especially ZigBee network is fine tuned to meet particular requirements in healthcare area. For example, some papers present real-time patient monitoring via ZigBee communication given the short distance between body sensors and remote devices, while the other work solve the limited coverage problem of Zigbee by designing mechanisms to relay Zigbee data to other types of wire or wireless infrastructure. However, very few of them investigate the scenarios of ZigBee coexisting or integrated with other networks. In this paper, we present the real-time data transmission from ZigBee end devices to Wide Area Network (WAN), Worldwide interoperation for microwave access network (WiMAX) and Long Term Evolution network (LTE). We provide in detail the ZigBee gateway components. Our simulation is conducted by OPNET, we visualize many topology network scenarios in ZigBee hybrid system. The results in simulation show that ZigBee end devices can successfully transmit data in real-time to other network end devices.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.11 s.353
• /
• pp.175-184
• /
• 2006

In this paper, we describe a 900MHz CMOS RF transceiver using an ISM band for ZigBee applications. The architecture of the designed rx front-end, which consists of a low noise amplifier, a down-mixer, a programmable gain amplifier and a band pass filter. And the tx front-end, which consists of a band pass filter, a programmable gain amplifier, an up-mixer and a drive amplifier. A low-if topology is adapted for transceiver architecture, and the total current consumption is reduced by using a low power topology. Entire transceiver is verified by means of post-layout simulation and is implemented in 0.18um RF CMOS technology. The fabricated chip demonstrate the measured results of -92dBm minimum rx input level and 0dBm maximum tx output level. Entire power consumption is 32mW(@1.8VDD). Die area is $2.3mm{\times}2.5mm$ including ESD protection diode pads.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.9
• /
• pp.920-926
• /
• 2007

Establishing a fixed path for the message delivery through a wireless network is impossible due to the mobility. Among the number of routing protocols that have been proposed for wireless ad-hoc networks, the AODV(Ad-hoc On-demand Distance Vector) algorithm is suitable in the case of highly dynamic topology changes, along with ZigBee Routing(ZBR), with the exception of route maintenance. Accordingly, this paper introduces a routing scheme focusing on the energy efficiency and route discovery time for wireless alarm systems using IEEE 802.15.4-based ZigBee. Essentially, the proposed routing algorithm utilizes a cluster structure and applies ZBR within a cluster and DSR (Dynamic Source Routing) between clusters. The proposed algorithm does not require a routing table for the cluster heads, as the inter-cluster routing is performed using DSR. The performance of the proposed algorithm is evaluated and compared with ZBR using an NS2 simulator. The results confirm that the proposed Cluster-based AODV (CAODV) algorithm is more efficient than ZBR in terms of the route discovery time and energy consumption.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.12B
• /
• pp.1514-1523
• /
• 2009

It is well known that the current wireless sensor networks addressing methods do not work efficiently in networks more than a few hundred nodes. A standard protocol in ZigBee-Standard feature in ZigBee 2007 gives balanced tree based address assignment method with distributed manner. However, it was limited to cover less than hundreds of sensor nodes due to the wasteful use of available address space, because composed sensor networks usually make an unbalanced tree topology in the real deployment. In this paper, we proposed the hierarchical cluster tree based address assignment method to support large and scalable networks. This method provides unique address for each node with distributed manner and supports hierarchical cluster tree on-demand. Simulation results show that the proposed method reduces orphan nodes due to the address exhaustion and supports larger network with limited address space compared with the ZigBee distributed address assignment method defined in ZigBee-Standard feature in ZigBee 2007.

• Journal of Information Processing Systems
• /
• v.8 no.3
• /
• pp.471-482
• /
• 2012

For disaster exploration and surveillance application, this paper aims to present a novel application of a multi-robot agent based on WSN and to evaluate a multi-hop communication caused by the robotics correspondingly, which are used in the uncertain and unknown subterranean tunnel. A Primary-Scout Multi-Robot System (PS-MRS) was proposed. A chain topology in a subterranean environment was implemented using a trimmed ZigBee2006 protocol stack to build the multi-hop communication network. The ZigBee IC-CC2530 modular circuit was adapted by mounting it on the PS-MRS. A physical experiment based on the strategy of PS-MRS was used in this paper to evaluate the efficiency of multi-hop communication and to realize the delivery of data packets in an unknown and uncertain underground laboratory environment.