• Structural Engineering and Mechanics
• /
• v.77 no.5
• /
• pp.601-612
• /
• 2021

To study the vibration characteristics of a high-speed railway continuous girder bridge-track coupling system (HSRCBT), a coupling vibration analysis model of an m-span continuous girder bridge-subgrade-track system with n-span approach bridge was established. The model was based on the energy and its variational method, where both the interlaminar slip and shear deformation effects were considered. In addition, the free vibration equations and natural boundary conditions of the HSRCBT were derived. Further, according to the coordination principle of deformation and mechanics, an analytical method for calculating the natural vibration frequencies of the HSRCBT was obtained. Three typical bridge-subgrade-track coupling systems of high-speed railway were taken and the results of finite element analysis were compared to those of the analytical method. The errors between the simulation results and calculated values of the analytical method were less than 3%, thus verifying the analytical method proposed in this paper. Finally, the analytical method was used to investigate the influence of the number of the approach bridge spans and the interlaminar stiffness on the natural vibration characteristics of the HSRCBT based on the degree of sensitivity. The results suggest the approach bridges have a critical number of spans and in general, the precision requirements of the analysis could be met by using 6-span approach bridges. The interlaminar vertical compressive stiffness has very little influence on the low-order natural vibration frequency of HSRCBT, but does have a significant influence on higher-order natural vibration frequency. As the interlaminar vertical compressive stiffness increases, the degree of sensitivity to interlaminar stiffness of each of the HSRCBT natural vibration characteristics decrease and gradually approach zero.

• CELLMED
• /
• v.11 no.4
• /
• pp.18.1-18.8
• /
• 2021

Jawarishe Jalinoos (JJ) is an orally used formulation available in semisolid dosage form, prepared with powdered plant materials mixed in honey or sugar syrup. It has many admirable pharmacological effects and used in Unani medicine to treat various acute and chronic disorders since ancient times. The ICH Harmonised Tripartite Guideline stated that photostability testing should be an essential part of stability testing to confirm that light exposure does not result in an unacceptable change in drugs substance and finished products. To date, the effect of light on JJ is not studied, in this study photostability evaluation of JJ was carried out. The test sample was manufactured with genuine ingredients in the in-door pharmacy of the National Institute of Unani Medicine. JJ was packed in two transparent polyethylene terephthalate airtight containers. The first sample was analysed at zero-day and the second sample was placed in a stability chamber subjected to light challenge with an overall illumination of 1.2 million lux hours combined with near ultraviolet energy of 200-watt hours per square meter by using option 2, along with 30±2℃ temperature and relative humidity 70±5%. Analysis of both finished products showed no considerable changes in organoleptic characters. Less than 5% variation was observed in physicochemical parameters. HPTLC fingerprinting showed justifiable variation. Microbial load and specific counts were within the limit prescribed by WHO. As no unacceptable changes were noted in JJ subjecting to light challenge, it is concluded that JJ is a photostable Unani compound formulation.

• Journal of Digital Convergence
• /
• v.19 no.11
• /
• pp.23-29
• /
• 2021

Countries are promoting Green New Deal policy to cope with global warming and climate change as a result of economic growth and overcome the economic crisis caused by the coronavirus 19. The role of ICT technology is crucial in realizing the Green New Deal policy, and standardization of ICT technology should be preceded. This paper examines domestic and foreign Green New Deal policies and analyzes trends in ICT standardization activities. Based on the analysis, we propose standards that should be developed for the eight major projects in order to successfully realize the Korean Green New Deal. A strategy to promote ICT standardization for the zero energy project in public facilities as an example was proposed. In addition, we present ways to resolve difficulties in realizing ICT standardization policies related to Korean Green New Deal. Through this study, it is expected that the Korean Green New Deal policies, which is being promoted at the pan-government level, will be effective based on ICT standard technology.

• Resources Recycling
• /
• v.31 no.5
• /
• pp.3-19
• /
• 2022

Electro-membrane technology is a process for separating and purifying substances in aqueous solution by electric energy using an ion exchange membrane with selective permeability, such as electrodialysis (ED) and bipolar electrodialysis (BMED). Electro-membrane technology is attracting attention as an environmental friendly technology because it does not generate by-products during the process and the recovered base or acid can be reused during the process. In this paper, we investigate the principles of ED and BMED technologies and various characteristics and problems according to the cell configuration. In particular, by investigating and analyzing research cases related to the treatment of waste sodium sulfate (Na₂SO₄), which is generated in large amounts during the metal recovery process.

• Korean Journal of Agricultural Science
• /
• v.49 no.2
• /
• pp.317-330
• /
• 2022

Recently, the policy regarding climate change in Korea and overseas has been to promote the utilization of forest biomass to achieve net zero emissions. In addition, with the implementation of the unused forest biomass system in 2018, the size of the Korean market for manufacturing wood pellets and wood chips using unused forest biomass is rapidly expanding. Therefore, it is necessary to estimate the total amount of unused forest biomass that can be used as an energy source and to identify the capacity that can be continuously produced annually. In this study, we estimated the actual forest area that can be produced of logging residue and the potential amount of unused forest biomass resources based on GT (green ton). Using a forest functions classification map (1 : 25,000), 5th digital forest type map (1 : 25,000), and digital elevation model (DEM), the forest area with a slope of 30° or less and mountain ridges of 70% or less was estimated based on production forest and IV age class or more. The total forest area where unused forest biomass can be produced was estimated to be 1,453,047 ha. Based on GT, the total amount of unused forest biomass potential resources in Korea was estimated to be 117,741,436 tons. By forest type, coniferous forests were estimated to be 48,513,580 tons (41.2%), broad-leaved forests 27,419,391 tons (23.3%), and mixed forests 41,808,465 tons (35.5%). Data from this research analysis can be used as basic data to estimate commercial use of unused forest biomass.

• Journal of Pharmacopuncture
• /
• v.26 no.3
• /
• pp.247-256
• /
• 2023

Objectives: Enterococcus faecalis is a gram positive diplococci, highly versatile and a normal commensal of the gut microbiome. Resistance to vancomycin is a serious issue in various health-care setting exhibited by vancomycin resistant Enterococci (VRE) due to the alteration in the peptidoglycan synthesis pathway. This study is thus aimed to detect the VRE from the patients with root caries from the clinical isolates of E. faecalis and to evaluate the in-silico interactions between vanA and the Aegles marmelos bio-compounds. Methods: E. faecalis was phenotypically characterized from 20 root caries samples and the frequency of vanA and vanB genes was detected by polymerase chain reaction (PCR). Further crude methanolic extracts from the dried leaves of A. marmelos was assessed for its antimicrobial activity. This is followed by the selection of five A. marmelos bio-compounds for the computational approach towards the drug ligand interactions. Results: 12 strains (60%) of E. faecalis was identified from the root caries samples and vanA was detected from two strains (16%). Both the stains showed the presence of vanA and none of the strains possessed vanB. Crude extract of A. marmelos showed promising antibacterial activity against the VRE strains. In-silico analysis of the A. marmelos biocompounds revealed Imperatonin as the best compound with high docking energy (-8.11) and hydrogen bonds with < 140 TPSA (Topological polar surface area) and zero violations. Conclusion: The present study records the VRE strains among the root caries with imperatorin from A. marmelos as a promising drug candidate. However the study requires further experimentation and validation.

• Journal of Forest and Environmental Science
• /
• v.26 no.2
• /
• pp.113-116
• /
• 2010

The Acacia seyal Del. var. seyal belongs to family Mimosaceae is known locally as gum Talha tree. It is a multipurpose tree species occurs throughout the African gum belt in Savannah mostly in pure forest. In Sudan it thrives on heavy clay soils that receive an annual rainfall between 400-800 mm. It is an important source of rural energy (fuelwood and charcoal) and forage. As mentioned by Nair (2007) the economic damage causes by insect in natural forest often difficult to judge due to no enough research attention The tree is frequently affected by biotic factors among them the insect pests. During a survey in the 1980's the tree was severely infested by the longhorned beetles (Cerambycidae) severely infesting other Acacia species, but the ecological data are overlooked. Therefore, the objective of the study was to assess infestation characteristics and to determine environmental factors triggering the attack of longhorned beetles. A temporary random sampling technique was applied to observe the damage characteristics of the longhorned beetles on tree species during May-July 2007. Five sample plots occupies by A. seyal were taken in Kordofan region directly observed for the presence of hole of emergence of the longhorned beetles, presence of dusts, presence of insect stages, girdling as well as other characteristics of damage. The study results indicate that the infestation rate of trees in the sampled sites ranged between zero and 23.08%. Further ecological researches are recommended.

• The Bulletin of The Korean Astronomical Society
• /
• v.46 no.2
• /
• pp.49.1-49.1
• /
• 2021

We carried out simultaneous monitoring observations of five maser lines, H₂O (22 GHz), SiO 𝝊 =1, 2, J =1-0 (43.1, 42.8 GHz), and SiO 𝝊 =1, J=2-1, J =3-2 (86.2, 129.3 GHz), toward the Mira variable star WX Serpentis with the 21-m antennas of the Korean VLBI Network (KVN) in 2009-2021 (~12 years). Most spectra of the H₂O maser are well separated into two parts of two blue- and one redshifted features within ± 10 km s-1 of the stellar velocity. All detected SiO masers are generally concentrated within ± 5 km s-1 of the stellar velocity, and sometimes appear split into two components. Overall, the profiles of SiO and H₂O masers detected in WX Serpentis illustrate typical characteristics of the Mira variable. In addition, flux variations of both SiO and H₂O masers are well correlated with the optical light curve of the central star, showing a phase lag of ~ 0.1 for SiO masers and ~ 0.2 for H₂O maser. This phenomenon is considered to be the direct effect of propagating shock waves generated by the stellar pulsation, because SiO and H₂O masers are sequentially distributed at different positions with respect to the central star. In addition, we analyzed long-term trends and characteristics of maser velocities, maser ratio, and the velocity extents (the full width at zero power; FWZP). We also investigated a spectral energy distribution (SED) ranging from 1.2 to 240 ㎛ obtained using several infrared data: 2MASS, WISE, IRAS, ISO, COBE DIBRE, RAFGL, and AKARI (IRC and FIS). From the IRAS LRS and ISO SWS spectra of this star, we identified 9.7 and 12 ㎛ silicate emission features consistent with the SE6 spectrum model, corresponding to the typical AGB phase.

• Geomechanics and Engineering
• /
• v.34 no.3
• /
• pp.267-284
• /
• 2023

Landslides are one of the most dangerous phenomena and natural disasters. Landslides cause many human and financial losses in most parts of the world, especially in mountainous areas. Due to the climatic conditions and topography, people in the northern and western regions of Iran live with the risk of landslides. One of the measures that can effectively reduce the possible risks of landslides and their crisis management is to identify potential areas prone to landslides through multi-criteria modeling approach. This research aims to model landslide potential area in the Oshvand watershed using a support vector machine algorithm. For this purpose, evidence maps of seven effective factors in the occurrence of landslides namely slope, slope direction, height, distance from the fault, the density of waterways, rainfall, and geology, were prepared. The maps were generated and weighted using the continuous fuzzification method and logistic functions, resulting values in zero and one range as weights. The weighted maps were then combined using the support vector machine algorithm. For the training and testing of the machine, 81 slippery ground points and 81 non-sliding points were used. Modeling procedure was done using four linear, polynomial, Gaussian, and sigmoid kernels. The efficiency of each model was compared using the area under the receiver operating characteristic curve; the root means square error, and the correlation coefficient . Finally, the landslide potential model that was obtained using Gaussian's kernel was selected as the best one for susceptibility of landslides in the Oshvand watershed.

• Computers and Concrete
• /
• v.32 no.1
• /
• pp.61-74
• /
• 2023

This article investigates the wave propagation analysis of the imperfect functionally graded (FG) sandwich plates based on a novel simple four-variable integral quasi-3D higher-order shear deformation theory (HSDT). The thickness stretching effect is considered in the transverse displacement component. The presented formulation ensures a parabolic variation of the transverse shear stresses with zero-stresses at the top and the bottom surfaces without requiring any shear correction factors. The studied sandwich plates can be used in several sectors as areas of aircraft, construction, naval/marine, aerospace and wind energy systems, the sandwich structure is composed from three layers (two FG face sheets and isotropic core). The material properties in the FG faces sheet are computed according to a modified power law function with considering the porosity which may appear during the manufacturing process in the form of micro-voids in the layer body. The Hamilton principle is utilized to determine the four governing differential equations for wave propagation in FG plates which is reduced in terms of computation time and cost compared to the other conventional quasi-3D models. An eigenvalue equation is formulated for the analytical solution using a generalized displacements' solution form for wave propagation. The effects of porosity, temperature, moisture concentration, core thickness, and the material exponent on the plates' dispersion relations are examined by considering the thickness stretching influence.