• Journal of the Korean Magnetic Resonance Society
• /
• v.25 no.4
• /
• pp.51-57
• /
• 2021

We study optical quantum transition line widths in relation to magnetic field dependence properties of the electrons confined in an infinite square well potential system between z = 0 and z = L_z in the z - direction. We consider two systems-one is subject to right circularly oscillating external fields and the other is subject to left circularly oscillatory external fields. Our results indicate that the line widths of right circularly oscillating external fields is larger than the line widths of left, while the opposite result is obtained for the line widths.

• Biomedical Science Letters
• /
• v.9 no.4
• /
• pp.231-240
• /
• 2003

Deciphering the molecular interactions of proteins forming Z-lines is pivotal for understanding the regulation of myofibril assembly, sarcomeric organization, and mechanical properties of striated muscle. The purpose of this study is to searched for potential novel ligands of the Z-line portion of nebulin. In this study interacting proteins with intra-Z-line region of nebulin were screened using a yeast two-hybrid approach. The interaction was conformed by GST pull-down assay. We identified 269 residues within villin/gelsolin homology domain of supervillin that intreacts with the serine rich region of nebulin. The specific interactions of nebulin and supervillin were confirmed in vitro by GST pull-down experiments. Our data suggest that supervillin attaches directly to the Z-line through its interaction with the serine rich domain of nebulin in skeletal muscles. This interaction may link myofibrillar Z-discs to the membrane-associated complexes, costameres.

• Proceedings of the IEEK Conference
• /
• 2002.06b
• /
• pp.57-60
• /
• 2002

In this paper, transmission lines with low and high characteristic impedance (Z$_{0}$) are fabricated and analyzed. The transmission lines are fabricated on the benzo-cyclo-butene (BCB) films of a low dielectric constant. For the low Z$_{0}$, two types of coplanar waveguide (CPW) structures are fabricated, which include bottom-ground and double-ground type. Measurement shows that Z$_{0}$ values for each CPW type are 7.3 and 9.4$\Omega$, respectively, at a signal line width of 100 #m. Whit the ratio between the spacing of bottom-ground and the signal line with becomes greater than 2.5, the Z$_{0}$ is nearly saturated. In addition, thin film microstrip lines fabricated using the BCB insertion layers show very low Z$_{0}$ of 25.5$\Omega$, and this impedance is ~64 % of the values obtained from the BCB-based CPW structures of the same line width. Measurement result of CPW on BCB layer is 100.5 Ω.s 100.5 Ω.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.12 no.4
• /
• pp.347-356
• /
• 1987

This paper is to propose a new line code suitable for a high speed unipolar pulse transmission system, such as a high speed optical digital transmission system. The original information speed can be converted into the transmission speed $\frac{(m+1)}{m}$ by the speed converter. Then this code, named mBiZ code, is generated by means of an Exclusive NOR between the bit stream inserted a space into every m bits and the bit stream delayed by the time slot allocated a single bit at the output coded sequence. Therefore, a mBiZ code can reduce a redundancy in the line code for transmission and its conversion circuits can be devised easily. The mBiZ code can also suppress undesirable long consecuitive identical digits and make line code balance in the mark and space ratio. Therefore, high frequency and low frequency components in power spectrum of a mBiZ code can be suppessed.

• Journal of the Korea Society of Computer and Information
• /
• v.3 no.3
• /
• pp.107-112
• /
• 1998

In this paper, filter designed and produced to use hi-Z low-Z filter which is easy to produce microstrip line and uses space less than used stub filter. This filter has very short electrical length of lines, that is Bl＜$\pi$/4, lowpass prototype series inductor replaced high impedance line section and shunt capacitance replaced low impedance line section. Replaced each section designed microstrip lines and effective permittivity of the given microstrip calculated and each section width and length calculated dna filter used design. Designed filter compared the theory value of touchstone with the experiment value of real produced filter and an analyzed response charictristic.

• Proceedings of the KIEE Conference
• /
• 2000.07a
• /
• pp.285-288
• /
• 2000

This paper presents a technique for contingency ranting using line capacity calculation method and outage distribution factors(LODF) which are established by generation shift distribution factors from DC load flow solutions. By using the LODF, the line flow can be calculated a ccording to the modification of base load flow if the contingency occur. To obtain contingency ranting, maximum power tansferred to the load is obtained when load impedance $Z_r$ equal to line impedance $Z_s$. ( $Z_r$/ $Z_s$=1) The proposed algorithm has been validated in tests on a 6-bus test system.

• Korean Journal of Food Science and Technology
• /
• v.10 no.1
• /
• pp.27-35
• /
• 1978

Ultrastructural changes in Z-line, M-line and myofilaments of bovine psoas muscle produced by leukocyte lysosomal enzymes in vitro at different pH values (pH 7.0 and 4.0), temperatures (37 and $4^{\circ}C$) and time intervals (12, 24 hours at $37^{\circ}C$ and 36, 168 hours at $4^{\circ}C$) were studied by transmission electron microscope. Muscle incubated with leukocyte lysosomal enzymes at pH 7.0 produced distinguishable degradation of Z-line, M-Line and H-zone at both temperatures but at acidic pH (pH 4.0), Z-line were very stable and myofilaments were severely disintegrated.

• The Journal of Natural Sciences
• /
• v.5 no.1
• /
• pp.1-3
• /
• 1992

G가 compact Lie 군이고 $\pi$ : $E to S^1$이 $S^1$ 상의 G-line bundle 일때, 군 작용이 없다면, 부드러운 trivial G-line bundle $E to S^1$ 은 S(V) $\times$ $\delta to S(V)$ 와 동치이고 부드러운 nontrivial G-line bundle $E to S^1$ 은 S(V) $\times$$z_2$ $\delta to S(V)$/$Z_2$=P(V)와 동치 이다.

• Journal of Power Electronics
• /
• v.10 no.3
• /
• pp.285-292
• /
• 2010

This paper presents a current mode integrated control technique (CM-ICT) using a modified voltage space vector modulation (MSVM) for Z-source inverter (ZSI) fed induction motor drives. MSVM provides a better DC voltage boost in the dc-link, a wide range of AC output voltage controllability and a better line harmonic profile. In a voltage mode ICT (VM-ICT), the outer voltage feedback loop alone is designed and it enforces the desired line voltage to the motor drive. An integrated control technique (ICT), with an inner current feedback loop is proposed in this paper for the purpose of line current limiting and soft operation of the drive. The current command generated by the PI controller and limiter in the outer voltage feedback loop, is compared with the actual line current, and the error is processed through the PI controller and a limiter. This limiter ensures that, the voltage control signal to the Z-source inverter is constrained to a safe level. The rise and fall of the control signal voltage are made to be gradual, so as to protect the induction motor drive and the Z-source inverter from transients. The single stage controller arrangement of the proposed CM-ICT offers easier compensation. Analysis, Matlab/Simulink simulations, and experimental results have been presented to validate the proposed technique.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.12
• /
• pp.14-21
• /
• 1997

This study was conducte dto fabricate 2GHz circulator using Ca,Sn substituted UIG(yttrium iron garnet)ceramics. When the electric, magnetic and microwave properties were measured in Ca, Sn substituted YIG, the measured perimittivity and perfmeability in microwave frequencies were 16.25, 0.8964. For $Y_{2.4}$C $a_{0.3}$A $n_{0.3}$F $e_{3.5}$A $l_{1.5}$ $O_{12}$ garnet ceramics sintered at 1400.deg. C, the ferrimagnetic resonance line width (.DELTA.H) at 10GHz was 53 Oe and saturation magnetization was 375G. The strip-line circulator was simulated with 3-D FEM (finite element method) software and designed at the center frequency of 2GHz. The fabricated strip-line junction circulator using above YIG ceramics had insertion loss of 1.271dB, return loss of 23.843dB, isolation of 21.751dB at the center frequency 1.855GHz.z.z.z.z.z.z.