• Tuberculosis and Respiratory Diseases
• /
• v.63 no.6
• /
• pp.491-496
• /
• 2007

Background: The best way of delivering drugs for the treatment of asthma and chronic obstructive pulmonary disease (COPD) is via the inhaled route of administration. However, many patients use inhaler devices incorrectly. To augment the proper use of inhalation medicine and to improve knowledge of the disease and compliance, we have developed a "Computerized Respiratory Service Program" and applied the use of this program to educate patients. Methods: Prospectively, this study was performed in 164 patients with asthma or COPD prescribed with inhaled medication. When inhalation medication was first prescribed, education using a drug model was conducted two times and thereafter every month. In addition, education using a drug model was conducted and the ability of the patient to use inhalation medicine properly was evaluated. Results: A total of 164 patients participated in the sessions more than two times and received education. Fifty-seven patients participated in three sesions. After the patients received education one time, the ability of these patients to use an inhaler had an average score of 20.6. After the patients received education two times, the average score was 21.9. After the patients received education three times, the average score was 22.3, a further increase. The compliance of using the inhaler was 70.1% at the second session and increased to 81.8% at the third session. Conclusion: Feedback education using the "Computerized Respiratory Service Program" will increase the ability of the patient to use an inhaler and consistent education can maintain patient compliance with inhaler use.

• Journal of Energy Engineering
• /
• v.29 no.2
• /
• pp.68-78
• /
• 2020

According to the new climate change agreement, technology development to reduce greenhouse gases is actively conducted worldwide, and research on energy efficiency improvement in the field of power generation and transmission and distribution is underway [1,2]. Economic analysis of the operation method of storing and supplying surplus electricity using energy storage devices, and using energy storage devices as a frequency adjustment reserve power in regional cogeneration plants has been reported as the most profitable operation method [3-7]. Therefore, this study conducted an economic analysis for the installation of energy storage devices in the combined heat and power plant in the Czech Republic. The most important factor in evaluating the economics of battery energy storage devices is the lifespan, and the warranty life is generally 10 to 15 years, based on charging and discharging once a day. For the simulation, the ratio of battery and PCS was designed as 1: 1 and 1: 2. In general, the primary frequency control is designed as 1: 4, but considering the characteristics of the cogeneration plant, it is set at a ratio of up to 1: 2, and the capacity is simulated at 1MW to 10MW and 2MWh to 20MWh according to each ratio. Therefore, life was evaluated based on the number of cycles per year. In the case of installing a battery energy storage system in a combined heat and power plant in the Czech Republic, the payback period of 3MW / 3MWh is more favorable than 5MW / 5MWh, considering the local infrastructure and power market. It is estimated to be about 3 years or 5 years from the simple payback period considering the estimated purchase price without subsidies. If you lower the purchase price by 50%, the purchase cost is an important part of the cost for the entire lifetime, so the payback period is about half as short. It can be, but it is impossible to secure profitability through the economy at the scale of 3MWh and 5MWh. If the price of the electricity market falls by 50%, the payback period will be three years longer in P1 mode and two years longer in P2 and P3 modes.

• Journal of dental hygiene science
• /
• v.13 no.4
• /
• pp.471-479
• /
• 2013

This study is trying to grasp the stress of the male high school students and the correlation between the stress according to the academic and economic level and oral parafunctional habits, emphasizing the need for the education of oral parafunctional habits, providing the basic data in order to accomplish correctly until the oral health of the oral maxillofacial region. From May 2013 till July 2013, a self administered survey was conducted by the selected by convenience sampling from subjects of 1, 2 grade of two high school located in Chungnam, Korea. The study results were as follow: 1) Among five areas of stress, the stress of school life was the highest as 2.11 points and the stress of home problem was the lowest as 1.51 points; 2) the stress by class showed that grade 2 was higher than grade 1 in all areas. The stress of the school life (2.21) (p<0.01), interpersonal relationship (p<0.01), and own problem (p<0.05) showed the significant difference; 3) The significance analysis results between the five areas of stress according to the stress of latent variable and the oral parafunctional habits all showed the significant difference (p<0.001). The correlation between the stress and the oral parafunctional habits showed a weak negative correlation as -0.30, and the stress of the school life, own problem, environment problem, and interpersonal relationship showed very strong correlations more than 0.7; 4) Fit measures test result of stress, academic level, and family economic level model all showed more than 0.9 in good of fit index, adjusted goodness of fit index, normed fit index and root mean square residual and root mean square error of approximation values is all estimated less than 0.1, so it showed good model. From this study, it can be concluded that there is the correlation between stress and oral parafunctional habits.

• Journal of Life Science
• /
• v.20 no.3
• /
• pp.411-415
• /
• 2010

Anisakis simplex is one of the parasitic nematodes, and has a complex life cycle in crustaceans, fish, squid or whale. When people eat under-processed or raw fish, it causes anisakidosis and also plays a critical role in inducing serious allergic reactions in humans. However, no web-based database on A. simplex at the level of DNA or protein has been so far reported. In this context, we constructed a web-based database for Anisakis research. To build up the web-based database for Anisakis research, we proceeded with the following measures: First, sequences of order Ascaridida were downloaded and translated into the multifasta format which was stored as database for stand-alone BLAST. Second, all of the nucleotide and EST sequences were clustered and assembled. And EST sequences were translated into amino acid sequences for Nuclear Localization Signal prediction. In addition, we added the vector, E. coli, and repeat sequences into the database to confirm a potential contamination. The web-based database gave us several advantages. Only data that agrees with the nucleotide sequences directly related with the order Ascaridida can be found and retrieved when searching BLAST. It is also very convenient to confirm contamination when making the cDNA or genomic library from Anisakis. Furthermore, BLAST results on the Anisakis sequence information can be quickly accessed. Taken together, the Web-based database on A. simplex will be valuable in developing species specific PCR markers and in studying SNP in A. simplex-related researches in the future.

• Korean Journal of Medicinal Crop Science
• /
• v.10 no.1
• /
• pp.46-50
• /
• 2002

In DNA level, genetic study of Angelica species was firstly conducted to discriminate the bolting-resistant or low bolting variety, so called as Manchu, from other Korea collected lines and also this technuque was applied to identify the origin of commercial dried materials obtained from current oriental medicinal market. By RAPD analysis with 72 primers including sixty of 10-mers and twelve of 20-mers, respectively, three primers, which were related to the bolting resistant traits of Angelica gigas, were identified. Comparing the RAPD bands, URP04 primer showed the 1.7 kb specific band, which seemed to be related to delaying bolting traits, since it was observed only in Jinbu elite lines but not in others. On the other hand, since 1.2 kb band amplified by OPD11 was observed in other collected lines but not in Manchu var. and Jinbu line, this primer also could be considered as a selection marker for identifying bolting resistant or delaying bolting traits. In the same manner, since OPP09 did not show 1 kb major band but produced 0.8 kb and 1.2 kb bands in Manchu var., these three bands amplified by the primer could be considered one of the important key specifying Manchu var. related with the trait of Angelica gigas. OPC02 primer showed the same band patterns in all Korean collected lines, but not in other foreign introduced lines, such as A. sinensis from China, and A. acutiloba from Japan. Since these four RAPD primers, OPD11, OPP09, URP04, and OPC02 showed the specific polymorphisms in Angelica species, thus, these were useful to discriminate the three Angelica species, A. gigas, A. sinensis, and A. acutiloba.

• Clinical and Experimental Pediatrics
• /
• v.53 no.3
• /
• pp.358-364
• /
• 2010

Purpose : The aim of this study was to determine the efficacy of $Synagis^{(R)}$ (palivizumab) in reducing the respiratory syncytial virus (RSV) readmission rate in very low birth weight infants (VLBWI ) and the subgroup that showed the most effective vaccination. Methods : We enrolled 350 VLBWI who had been discharged alive from the neonatal intensive care unit of Samsung Medical Center from January 2005 to December 2007 and were followed up for at least one year. A retrospective study based on medical records was performed for a period of one year after discharge. RSV readmission rate was investigated according to BPD (bronchopulmonary dysplasia, requiring oxygen at postnatal day 28) and $Synagis^{(R)}$ prophylaxis. We categorized the subgroups by the severity of BPD gestational age, and birth weight and compared the RSV readmission rates between subgroups. Results : Eleven VLBWI were readmitted. $Synagis^{(R)}$ prophylaxis resulted in a 86% reduction in the rate of readmission due to RSV infection (prophylaxis group, 0.7% and no prophylaxis group, 5.0%; P =0.02). Readmission rate in BPD patients was also reduced in the prophylaxis group (0.7% in the prophylaxis group vs. 5.2% in the no prophylaxis group, P =0.03). The readmission rate in patients without BPD was reduced in the prophylaxis group (0% in the prophylaxis group vs. 4.9% in the no prophylaxis group, P =1.00), but this was not statistically significant.Conclusion : $Synagis^{(R)}$ prophylaxis was effective at reducing RSV readmission in VLBWI. Its efficacy was verified irrespective of BPD, gestational age, or birth weight.

• The Korean Journal of Pesticide Science
• /
• v.18 no.3
• /
• pp.202-209
• /
• 2014

RNA interference (RNAi) is the method which controls phenotypes of gene in live cells. Chitinase is the enzyme helping digestion and absorption of old cuticles during the ecdysis of insects. In order to investigate molting-inhibition effect with the chitinase related gene in Spodoptera litura, RNA was extracted from the $5^{th}$ instars. cDNA was synthesized and then we obtained about 700 bp size chitinase. After PCR products were cloned into a pGEM T-easy vector, colonies were picked. DNA was extracted from the colony cultures. EcoR I enzyme was used to check whether PCR products were inserted or not. And then we confirmed vector band of about 3 kb and insert band of about 700 bp. To synthesize the dsRNA, each DNA was cut with Spe I and Nco I enzymes (Circular DNA became lineared DNA). After synthesis of dsRNA, approximately 5 ul dsRNA was injected into the $3^{rd}$ abdominal segment of S. litura $4^{th}$ larvae. The concentration of dsRNA was about $10{\mu}g/{\mu}l$. We confirmed larval-larval molting : there were phenotypically abnormal individuals - for instance malformation, molting inhibition and change of integument color. Pupaadult molting : there were phenotypically abnormal individuals - for instance molting inhibition, change of wings and malformation. Also we could investigate the pupation, emergence and variation about noninjection, treated with DW and dsRNA. Each pupation was non-injection 83.3%, DW 78.3% and dsRNA 66.7%. Each emergence was non-injection 90.0%, DW 72.3% and dsRNA 65.0%. So we considered that chitinase dsRNA induced molting inhibition effect. But each variation was non-injection 8.9%, DW 2.9% and dsRNA 19.2%. Therefore dsRNA group showed the highest variation value. When 18 hours after injecting dsRNA, we could obtain abnormal individual.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.4
• /
• pp.627-633
• /
• 2016

Sweet sorghum [Sorghum bicolor (L)] is one of the major crops for biofuels such as sugarcane and sugar beet which raw materials rich in saccharide. Sweet sorghum juice was extracted from the stem. It's composed of fermentable sugars such as glucose, fructose and sucrose. Ethanol from the extracted sweet sorghum juice can be easily produced by yeast fermentation process. Sweet sorghum juice is consisted of not only sugars but also various nutrients like nitrogen and phosphate. For commercial production of bioethanol, seed culture is one of the important parts of fermentation, so that optimal culture medium should be selected for the reduction of processing costs. In this study, sweet sorghum juice was estimated as a culture medium for seed culture of cellulosic bioethanol. For the comparison of cultures with various substrates, it used YPD including each 5 g/L yeast extract and peptone, sweet sorghum juice and hydrolyzed Miscanthus was taken part in the culture with 2%, 5% and 10% sugar conditions. Based on media of YPD and sweet sorghum juice, cell-mass concentration was obtained maximum more than $2.5{\times}10^8CFU/mL$ after 24 h of cultivation. Consequently sweet sorghum juice is suitable for the cell culture with more than $1.0{\times}10^8CFU/mL$ after 12 h of cultivation. This can be used as a culture medium for the cellulosic bioethanol industry.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.1
• /
• pp.35-41
• /
• 2008

The purpose of this study was to investigate the effects of Chungkookjang viscous biopolymer supplementation on blood glucose and serum lipid-lowering in Streptozotocin (STZ)-induced diabetic rats. The rats were divided into three experimental groups; a normal group (N), diabetic control group (D), and a diabetic group with the supplementation of Chungkookjang viscous biopolymer (DCB). The groups were given experimental diets for four weeks. The normal group (C) was fed a casein-based diet, and the Chungkookjang viscous biopolymer group (DCB) received 3% biopolymer added to the casein-based diet. In the diabetic group (D), food intake increased significantly, but weight gain decreased significantly. The food efficiency ratio was significantly lower in the diabetic group. Liver weight increased significantly in the D group as compared to the N group. However, the DCB group showed a significant decrease in liver weight when compared to the D group. Blood glucose decreased significantly in the DCB group after receiving the experimental diet for four weeks, as compared to the diabetic control (p<0.05). Serum triglyceride levels were significantly lower in the DCB group than in the D group, whereas HDL-cholesterol levels were significantly higher (p<0.05). Total cholesterol was decreased in DCB group, but there were no significant differences. Also, LDL-cholesterol level was not significantly different among the experimental groups. Hepatic triglyceride and cholesterol were lower in the DCB group with no significant differences among groups. These results indicate that dietary supplementation of Chungkookjang viscous biopolymer improved glucose lowering and lipid metabolism in diabetic rats.

• Journal of Periodontal and Implant Science
• /
• v.23 no.3
• /
• pp.493-506
• /
• 1993

For maintenance of an ailing or failed implant it is essential to treat the implant fixture surface so as to remove bacterial endotoxin and make a surface tolerated by surrounding soft and hard tissue. Thus in this study the method that makes the smoothest surface treated with a high speed diamond bur, a low speed diamond bur, a stone, a rubber point or Jetpolisher was studied. With the profilomenter a mean value of $R_{max}$ was measured. The hight speed diamond, the rubber point and the Jetpolisher showed a mean $R_{max}\;7.77{\mu}m$. The low speed diamond bur, the rubber, point and the Jetolisher made a mean value of $R_{max}\;8.44{\mu}m$. The stone, the rubber point and the Jetolisher showed the smoothest surfaces with a mean value of $R_{max}\;6.24{\mu}m$. TPS (titanium plasma sprayed) areas showed a mean vlaue of $R_{max}\;24.42{\mu}m$, and the smooth surfaced titanium disc manufactured by the company (IMZ, Germany) shows a mean value of $R_{max}\;3.00{\mu}m$. Under the SEM examination the disc treated with a high speed diamond bur, a rubber point and a Jetpolisher showed partially remaining TPS particles, but the height of these particles were reduced remarkably compared with those of the original TPS. The disc treated with a low speed diamond bur, a rubber point and a Jetpolisher showed a rough topography with remaining TPS on the entire surface. A stone, a rubber point and a Jetpolisher removed almost TPS and the bulk titanium metal was exposed and some scratches were made by the stone. All treated discs were revealed as rougher than the smooth surface disc manufactured by the company. An untreated TPS disc shows a very irregular surface and a $40{\mu}m$ height of the plasma sprayed areas.