• Nuclear Engineering and Technology
• /
• v.36 no.4
• /
• pp.285-294
• /
• 2004

Pressure wave propagation in the discharge piping with a sparger submerged in a water pool, following the opening of a safety relief valve, is analyzed. To predict the pressure transient behavior, a RELAP5/MOD3 code is used. The applicability of the RELAP5 code and the adequacy of the present modeling scheme are confirmed by simulating the applicable experiment on a water hammer with voiding. As a base case, the modeling scheme was used to calculate the wave propagation inside a vertical pipe with sparger holes and submerged within a water pool. In addition, the effects on wave propagation of geometric factors, such as the loss coefficient, the pipe configuration, and the subdivision of sparger pipe, are investigated. The effects of inflow conditions, such as water slug inflow and the slow opening of a safety relief valve are also examined.

• 한국방재학회:학술대회논문집
• /
• 2010.02a
• /
• pp.104-104
• /
• 2010

지난 2008년 가을부터 시작되어 2009년 봄까지 발생했던 전국적인 극한 가뭄을 계기로 가뭄모니터링의 필요성은 증대되었다. 본 연구는 우리나라에서 가뭄 모니터링을 위한 MODIS 위성영상 자료의 활용을 제안하였다. MODIS 영상은 임의의 지역의 시 공간적 특성을 관찰할 수 있는 해상도를 보유하고 있으며, MODIS에서 제공하는 MOD11(LST: Land Surface Temperature)은 가뭄 발생의 판별에는 유효하나 가뭄 심도와 지속기간을 판단하기 위해서는 기준이 되는 강우량 및 가뭄지수와의 비교가 필요하다고 알려져 있다. 본 연구에서는 MOD11(LST) 위성자료와 EDI(Effective Drought Index) 가뭄지수의 상관성을 고려하여 한반도 가뭄모니터링을 위한 MODIS 위성영상의 활용성을 평가하였다.

• Journal of Pharmaceutical Investigation
• /
• v.30 no.4
• /
• pp.289-293
• /
• 2000

Three polymorphic modifications and one amorphous form were prepared by recrystallization under various conditions and characterized by DSC and X-ray crystallography. At $37{\pm}0.5^{\circ}C$, the polymorphic modifications showed significant differences in the dissolution rate. The dissolution rate of Mod. 4, amorphous form, was faster than that of other polymorphic modifications. When all modifications were stored at 52% RH, 95% RH, and in silica gel desiccator, amorphous form was transformed at 95% humidity condition.

• Proceedings of the KSRS Conference
• /
• 2009.03a
• /
• pp.116-120
• /
• 2009

원격탐사 기술은 사람이 직접 방문하여 조사하기 힘든 극지라든가 농업환경에 대한 자료 요구도가 높으면서도 직접 수집이 어려운 비접근 지역에 대한 정보를 추출하는데 유용한 관측수단이다. 본 연구는 MODIS(Moderate Resolution Imaging Spectroradiometer) 제공 산출물 중 16일 단위로 작성되는 NDVI(Normalized Difference Vegetation Index, MOD13)를 이용하여 북한의 벼 수량을 추정하는 것을 목적으로 하였고, 그 가능성과 한계에 대하여 알아보았다. 2000년부터 2008년까지 촬영된 MODIS MOD13 자료를 미국 NASA로부터 제공받아 좌표체계를 우리나라에 맞게 투영하고 NDVI를 추출하여 자료분석에 사용하였다. 통계청에서 발표한 벼 수량 및 생산량 통계자료를 이용하였다. 농촌진흥청 국립농업과학원에서 작성한 북한의 토지피복분류도를 이용하여 서해안 평야지대에 위치한 논을 위도별로 네군데 정하여 관심지역(area of interest)으로 설정하였다. 이 관심지역에 대한 시계열 값을 추출하여 연중 연간 변화를 분석하고 2000년부터 2007년까지 수잉기의 NDVI 값을 이용하여 수량에 대한 상관계수(r)는 $0.77^*$로 5%에서 유의하여 NDVI 값에 따라 벼 수량에 큰 영향을 주는 것으로 나타났다. 수잉기의 NDVI 값과 벼 수량에 대해 회귀분석한 결과($R^2=0.591^*$), NDVI에 따른 벼 수량의 변이를 59.1% 설명할 수 있었다. 이와 같이 회귀식을 이용하여 2008년 북한의 벼 수량은 약 2.80 ton/ha로 추정되었다.

• Journal of IKEEE
• /
• v.8 no.1 s.14
• /
• pp.1-11
• /
• 2004

This paper proposes new multiplicative techniques over finite field, by using KOA. At first, we regenerate the given polynomial into a binomial or a trinomial to apply our polynomial multiplicative techniques. After this, the product polynomial is archived by defined auxiliary polynomials. To perform multiplication over $GF(2^m)$ by product polynomial, a new mod $F({\alpha})$ method is induced. Using the proposed operation techniques, multiplicative circuits over $GF(2^m)$ are constructed. We compare our circuit with the previous one as proposed by Parr. Since Parr's work is premised on $GF((2^4)^n)$, it will not apply to general cases. On the other hand, the our work more expanded adaptive field in case m=3n.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.7 s.184
• /
• pp.159-167
• /
• 2006

The impact time history of human body with K2 rifle on stand shooting posture is analyzed and compared with experimental results. Analysis model is Korean 50% tile of twenties and height, weight is 174 cm, 62 kgf respectively. The muscle and bone human model of Korean man's twenties 50% tile is applied. ADAMS program is used for kinematic analysis and human model is developed by Life Mod program. The effect of the ground support condition, grip position and human weight factor are studied. Maximum impact force of shoulder is 784 N. The horizontal displacement of K2 rifle muzzle is 2.9 cm.

• Journal of Pharmaceutical Investigation
• /
• v.31 no.2
• /
• pp.119-123
• /
• 2001

Six polymorphic modifications of Balofloxacin (Q-35) were obtained by the recrystallization from different organic solvents and characterized by differential scanning calorimetry (DSC), X-ray powder diffraction (XRPD). The dissolution patterns of these six modifications were also checked in distilled water at $37{\pm}0.5^{\circ}C$, 50 rpm for 60 minutes. The polymorphic modifications showed significant differences in the dissolution rate. The dissolution rate of Mod. 1 was faster than that of other polymorphic modifications. The transformation during storage was also studied.

• Bulletin of the Korean Mathematical Society
• /
• v.50 no.6
• /
• pp.2021-2026
• /
• 2013

Let G = (V,E) be a graph. A function $f:V{\rightarrow}\{-1,+1\}$ defined on the vertices of G is a signed total dominating function if the sum of its function values over any open neighborhood is at least one. The signed total domination number of G, ${\gamma}^s_t(G)$, is the minimum weight of a signed total dominating function of G. In this paper, we study the signed total domination number of generalized Petersen graphs P(n, 2) and prove that for any integer $n{\geq}6$, ${\gamma}^s_t(P(n,2))=2[\frac{n}{3}]+2t$, where $t{\equiv}n(mod\;3)$ and $0 {\leq}t{\leq}2$.

• Honam Mathematical Journal
• /
• v.31 no.4
• /
• pp.591-599
• /
• 2009

For given ${\alpha},{\omega}\;{\in}\;{\mathbb{R}}$ and ${\beta}$ > 1, let $T_{{\beta},{\alpha},{\omega}}$ be the skew-product transformation on the torus, [0, 1) ${\times}$ [0, 1) defined by (x, y) ${\longmapsto}\;({\beta}x,y+{\alpha}x+{\omega})$ (mod 1). In this paper, we give a criterion of ergodicity and weakly mixing for the transformation $T_{{\beta},{\alpha},{\omega}}$ when the natural extension of the given ${\beta}$-transformation can be viewed as a generalized baker's transformation, i.e., they flatten and stretch and then cut and stack a two-dimensional domain. This is a generalization of theorems in [10].

• Nuclear Engineering and Technology
• /
• v.31 no.5
• /
• pp.476-485
• /
• 1999

In order to evaluate the gravity-injection capability to maintain core cooling after a loss-of-shutdown-cooling event during shutdown operation, the plant conditions of the Yong Gwang Units 3&4 were reviewed. The six cases of possible gravity-injection paths from the refueling water tank (RWT) were identified and the thermal-hydraulic analyses were performed using the RELAP5/MOD3.2 code. The core cooling capability was significantly dependent on the gravity-injection path, the RCS opening, and the injection rate. In the cases with the pressurizer manway opening higher than the RWT water level, the coolant was held up in the pressurizer and the system pressure continued increasing after gravity-injection. The gravity injection eventually stopped due to the high system pressure and the core was uncovered. In the cases with the injection path and opening on the same leg side, the core cooling was dependent on whether the water injected from the RWT passed the core region or not. However, in the cases with the injection path and opening on the different leg side, the system was well depressurized after gravity-injection and the core boiling was successfully prevented for a long-term transient. In addition, from the sensitivity study on the gravity-injection flow rate, it was found that about 54 kg/s of injection rate was required to maintain the core cooling and the core cooling could be provided for about 10.6 hours after event with that injection rate from the RWT. Those analysis results would provide useful information to operators coping with the event.