• 한국작물학회지
• /
• 제46권2호
• /
• pp.95-99
• /
• 2001

Soybean [Glycine max (L.) Merr.) is known to produce the highest total digestible mutrients (TDN) yield among summer grain legumes in Jeju area but little is known about the effects of cultural practices on forage yield and quality. A determinate soybean cv. Baegunkong was planted on 5 June, 20 June, and 3 July and grown at four plant densities (30, 50, 70 and 90 plants $m^{-2}$ in 1998 in Jeju to evaluate the effects of planting date and plant density on the yield and quality of soybean forage. Days to flowering decreased from 47 to 38 days, average plant height from 61 to 51cm and main stem diameter from 6.31 to 5.00mm as planting was delayed from 5 June to 3 July. Average plant height quadratically increased from 45 to 62cm as plant density increased from 30 to 90 plants $m^{-2}$. Planting date did not affect the average dry matter, crude protein, and TDN yields. The average dry matter and TDN yields displayed a quadratic response to plant density and the optimum plant density for both dry matter and TDN yields was estimated about 60 plants $m^{-2}$. Plant density had no effect on crude protein yield. Planting date did not significantly influence forage quality. The crude protein content was not significantly influenced by plant density. Increasing plant density slightly increased acid detergent fiber content but slightly decreased TDN content.

• 한국초지조사료학회지
• /
• 제11권3호
• /
• pp.175-181
• /
• 1991

The purpose of this experiment was to evaluate the effects of shade and levels of N fertilization on the dry matter yield and chemical compositions of orchardgrass grown under floor of chestnut tree. Shading conditions consist of $S_0$, (full light), $S_1$, (about 6OC4 shade) and $S_2$, (about 70% shade). And, nitrogen fertilizer was applied at 3 levels, O($N_0$), 12($N_1$), and 30($N_2$) kg per 10a, respectively. The results are may be summarized as follows: 1. Maximum total dry matter yield of $S_0$, was obtained about 1.28 ton/lOa at $N_2$, level. But, total dry matter yields of N levels in $S_1$, and $S_2$, were decreased about 42-45% compared with $S_0$. 2. The response of the dry matter yield to N fertilization were differences between shading and levels of N. Thus, the dry matter yield of $S_1$, increased almost linear up to about 30 kg/l0a level, while the dry matter yield of S, was increased slightly up to 30 kgIl0a. But. $S_2$, was increased up to 12 kg/lOa and then decreased slightly with N fertilization over the 12 kg/l0a. 3. Average increase in total dry matter yield to N fertilization were 23.85 kg, 7.97 kg and 5.08 kg DM for $S_0$, $S_1$, and $S_2$, respectively. 4. The level of 12 kg N/lOa is the limiting N level to obtain dry matter production under 60-709 shading conditions. 5. The contents of crude protein arid nitrate nitrogen were increased with shading and incremental N fertilization up to 30 kg/l0a. But, water soluble carbohydrate content was decreased greatly with high shading and high levels of N. 6. Nitrate nitrogen content indicated highly significant positive correlation with crude protein, but significant negative correlation with water soluble carbohydrate content. 7. At 30 kg N level with $S_1$, was necessary to exceed the potentially toxic nitrate nitrogen level of 0.20%.

• 한국연초학회지
• /
• 제19권2호
• /
• pp.92-101
• /
• 1997

This study was conducted to investigate the effect of fly ash on the yield and quality and to determine the optimum application amount of fly ash for tobacco(Nicotiana tabacum L). Two kinds of fly ash, anthracite and bituminous coal, were treated with different levels of 0, 20, 40, 60 MT/ha. Dry weights of tobacco at middle and topping growth stage were increased with application of fly ash, showing the highest dry weight at 40 MT/ha in both kinds of fly ash. It was showed that the bituminous coal had a little more effective for yield than that of anthracite. Comparing with the control, yields of tobacco applied with fly ash were significantly increased about 17.7% and 17.1% by the application of bituminous coal and anthracite, respectively. Quality of flue-cured leaves was better by application of fly ash than that of the control. The quality index was given the highest at 40 MT/ha for bituminous coal increasing by 24.6% and at 60 MT/ha fur anthracite increasing by 13.4% compared with the control. The economical efficiency considered of the yield and quality of tobacco was the highest at 40 MT/ha of bituminous. Soil pH, contents of available P2O5, organic matter, exchangeable Ca2+ and Mg2+ of soil during the growing season were increased by application of fly ash, showing more effectiveness in bituminous than that in anthracite. By the application of fly ash, the nutrients availability and the acidity of soil were reformed and they caused significantly the increase of growths yield, and quality of tobacco. By the application of lime reforming soil acidity, growth response, yields and quality of tobacco were not increased compared to the control, although the effect of reforming soil pH was remarkable.

• 한국유기농업학회지
• /
• 제6권1호
• /
• pp.51-61
• /
• 1997

This experiment was carried out to investigate the growth response of 3 grasses to seed coating with chitosan solution and the attempt was made to estimate adequate seed coating concentrations of chitosan solution in each grass for the growth to be stimulated. Three species used in this experiment were orchardgrass, tall fescue and reed canarygrass. Six different seed coating concentrations of chitosan solution were applied as 0%(control), 0.01%, 0.05%, 0.1% and 1.0%, respectively. the results were obtained as follows; 1. Dry weight of tiller(WT), leaf area(LA), dry weight of leaf(LW), dry weight of stem(SW), dry weight of shoot(SHW), biological yield(BY) and C/F ratio were significantly different between species. 2. Number of tillers per plant(NT), dry weight of tiller(WT), dry weight of leaf(LW), dry weight of root(RW), dry weight of shoot(SHW), biological yield(BY) and T/R ration were significantly different between seed coating concentrations of chitosan solution. 3. The adequate seed coating concentrations of chitosan solution for the growth stimulating effect were different between species. The highest values of yield components and dry weight of plant parts were obtained at 1% in orchardgrass and tall fescue, and 0.05% in reed canarygrass, respectively. 4. Growth stimulating effect of seed coating in each species were different. The highest values were obtained in leaf area(LA), dry weight of leaf(LW), dry weight of root(RW), dry weight of shoot(SHW) and dry weight of biological yield(BY) in orchardgrass. The values of dry weight of stem(SW) and C/F ration were highest in reed canarygrass. 5. An increase in number of tillers per plant(NT), dry weight of leaf(LW), dry weight of stem(SW) and dry weight of root(RW) according to seed coating was attributed to the increase in dry weight of shoot(SHW). Among the aboved increasing factors, the dry weight of leaf(LW) was a main factor for the increase in dry weight of shoot(SHW). 6. An increase in dry weight of leaf(LW), dry weight of stem(SW) and dry weight of root(RW) according to seed coating was attributed to the increase in biological yield(BY). Both the dry weight of leaf(LW) and dry weight of root(RW) were main factors for the increase in biological yield(BY).

• 한국자원식물학회지
• /
• 제10권4호
• /
• pp.382-385
• /
• 1997

미역취의 재배기술 확립을 위하여 육묘일수에 따른 생육특성, 추대율 및 수량성을 시험하여 얻어진 결과를 요약하면 다음과 같다. 1. 육묘일수에 따른 생육은 재배년수와는 무관하게 60일 육묘와 70일 육묘에서 초장, 분기수가 40일 육묘와 50일 육묘보다 양호하였다. 2. 육묘일수별 추대반응은 1년차의 경우 40일 육묘와 50일 육묘에서 추대율이 각각 14.5%, 13.5%로 나타난 반면 60일 육묘와 70일 육묘에서는 추대주가 없었다. 3. 육묘일수별 생엽수량은 육묘일수에 따라 다소 수량차이는 있었지만 전반적으로 60일 육묘가 가장 높은 수량성을 보였다. 4. 재배년수에 따른 추대율은 2년차 재배보다 평균적으로 3년차 재배에서 낮아졌으며 생엽 수량은 38% 증가되었다. 5. 미역취의 추대에 따른 적정 수량확보를 위한 적정 육묘일수는 60일정도 육묘하여 재배하는 것이 유리한 것으로 판단되었다.

• 생명과학회지
• /
• 제27권1호
• /
• pp.38-43
• /
• 2017

강한 항 염증 활성을 갖는 glycosyl aesculin이 Thermotoga neapolitana ${\beta}-glucosidase$의 당전이 활성을 통하여 aesculin을 수용체로 이용하여 합성되었다. 약 $2{\mu}g$의 효소를 이용하여 반응표면분석법을 통한 주요 반응 매개변수들의 최적화가 시도되었다. 각 반응 변수들의 통계분석 결과 2차 다항식모델이 적용된 유의값(p<0.05)에 잘 맞았다. Aesculin과 다른 매개변수사이의 상호관계를 의미하는 반응표면곡선 그래프는 glycosyl aesculin의 수율이 주로 aesculin의 농도와 반응시간에 영향을 받음을 나타내었다. Glycosyl aesculin의 생산을 위한 반응최적조건은 aesculin의 농도 9.5 g/l, 온도 $84^{\circ}C$, 반응시간 81분, 그리고 pH 8.2로 나타났으며, 이러한 조건하에서 효소반응시 61.7%의 전환율로 5.86 g/l 의 수율이 예상되었다. 실험을 통한 실질적인 수율은 6.02 g/l으로 나타났다. 실질적인 수율과 가까운 값을 예측 가능하다는 것을 통하여 반응표면분석법이 효소반응의 전환율을 최적화하는데 타당하다는 것이 입증되었다. 본 연구에서는 반응표면분석법을 활용하여 최적화 이전에 비하여 약 1.6배의 glycosyl aesculin을 얻을 수 있었다. 이러한 결과들은 반응표면분석법이 미생물유래 당화효소를 이용한 생물학적 활성을 갖는 배당체 합성의 생산 최적화에 효과적으로 활용할 수 있다는 것을 보여준다.

• 전산구조공학
• /
• 제5권1호
• /
• pp.119-132
• /
• 1992

반복하중을 받는 짧은 I보(Beam)의 횡-비틀림 좌굴(Lateral-Torsional Buckling)에 대한 광범위한 Parametric Study를 수행하여 보의 좌굴현상을 좀 더 깊이 고찰하고자 한다. 유한한 비틀림변형의 뒤틀림(Warping)이외에 미소한 절단변형의 뒤틀림도 고려한 기하학적(완전) 비선형의 일차원 보를 해석적 모델로 사용하고, 또한 금속의 주기적소성(Cyclic Plasticity)거동을 보다 잘 나타내기 위해 다축 주기적소성모델을 Consistent Return Mapping Algorithm과 결합시켜 적용한다. 기준치 근방에서 아래와 같은 여러가지 Parameter Study를 수행하므로써 반복하중을 받는 짧은 I보의 횡-비틀림 좌굴의 일반적 응답을 고찰한다 : 재료의 강복강도, 강복플래토(Yield Plateau), 변형율경화, 이동경화(Kinematic Hardening), 잔류응력, 작용하중의 절단중심에 대한 편심률, 작용하중의 보 단면에 대한 높이, 작용하중의 보 길이방향의 위치, 보 단면의 치수, 작용하중으로부터 멀리 떨어진 지지단의 고정도.

• Asian-Australasian Journal of Animal Sciences
• /
• 제30권8호
• /
• pp.1105-1116
• /
• 2017

Objective: A meta-analysis was conducted to evaluate the effects of supplemental fat containing saturated free fatty acids (FA) on milk performance of Holstein dairy cows. Methods: A database was developed from 21 studies published between 1991 and 2016 that included 502 dairy cows and a total of 29 to 30 comparisons between dietary treatment and control without fat supplementation. Only saturated free FA (>80% of total FA) was considered as the supplemental fat. Concentration of the supplemental fat was not higher than 3.5% of diet dry matter (DM). Dairy cows were offered total mixed ration, and fed individually. Statistical analysis was conducted using random- or mixed-effects models with Metafor package in R. Results: Sub-group analysis showed that there were no differences in studies between randomized block design and Latin square/crossover design for dry matter intake (DMI) and milk production responses to the supplemental fat (all response variables, $p{\geq}0.344$). The supplemental fat across all studies improved milk yield, milk fat concentration and yield, and milk protein yield by 1.684 kg/d (p<0.001), 0.095 percent unit (p = 0.003), 0.072 kg/d (p<0.001), and 0.036 kg/d (p<0.001), respectively, but tended to decrease milk protein concentration (mean difference = -0.022 percent unit; p = 0.063) while DMI (mean difference = 0.061 kg/d; p = 0.768) remained unchanged. The assessment of heterogeneity suggested that no substantial heterogeneity occurred among all studies for DMI and milk production responses to the supplemental fat (all response variables, $I^2{\leq}24.1%$; $p{\geq}0.166$). Conclusion: The effects of saturated free FA were quantitatively evaluated. Higher milk production and yields of milk fat and protein, with DMI remaining unchanged, indicated that saturated free FA, supplemented at ${\leq}3.5%$ dietary DM from commercially available fat sources, likely improved the efficiency of milk production. Nevertheless, more studies are needed to assess the variation of production responses to different saturated free FA, either C16:0 or C18:0 alone, or in combination with potentially optimal ratio, when supplemented in dairy cow diets.

• 한국환경과학회지
• /
• 제24권12호
• /
• pp.1591-1600
• /
• 2015

The response of the freshwater microalga, Chlorella vulgaris, to heavy metal stress was examined based on chlorophyll fluorescence analysis to assess the toxic effects of heavy metals in freshwater ecosystems. When toxic effects were analyzed using regular chlorophyll fluorescence analysis, photosystem II activity($F_v/F_m$) decreased significantly when exposed to $Cu^{2+}$ and $Hg^{2+}$ for 12 h, and decreased in the order of $Hg^{2+}>Cu^{2+}>Cd^{2+}>Ni^{2+}$ when exposed for 24h. The effective photochemical quantum yield(${\phi}{\prime}_{PSII}$), chlorophyll fluorescence decrease ratio($R_{Fd}$), minimal fluorescence yield($F_o$), and non-photochemical quenching(NPQ), but not photochemical quenching(qP), responded sensitively to $Hg^{2+}$, $Cu^{2+}$, and $Cd^{2+}$. These results suggest that $F_v/F_m$, as well as ${\phi}{\prime}_{PSII}$, $R_{Fd}$, $F_o$, and NPQ could be used to assess the effects of heavy metal ions in freshwater ecosystems. However, because many types of heavy metal ions and toxic compounds co-occur under natural conditions, it is difficult to assess heavy metal toxicity in freshwater ecosystems. When Chlorella was exposed to heavy metal ions for 12 or 24h, $F_v/F_m$ and maximal fluorescence yield($F_m$) changed in response to $Hg^{2+}$ and $Cu^{2+}$ based on image analysis. However, assessing quantitatively the toxic effects of several heavy metal ions is challenging.

• 공업화학
• /
• 제29권5호
• /
• pp.565-570
• /
• 2018

본 연구에서는 초음파 용매추출공정을 이용하여 닥나무로부터 항산화성분을 추출하고, 중심합성계획모델을 이용하여 추출공정을 최적화하였다. 중심합성계획모델의 반응치로는 추출수율과 DPPH 라디칼소거활성을 설정하고, 독립변수인 추출시간, 주정/초순수 부피비, 초음파 조사세기에 따른 주효과도와 교호효과도를 해석하였다. 추출수율과 DPPH 라디칼소거활성 모두 계량인자의 주효과도와 교호효과도를 모두 고려하였을 때 가장 큰 영향을 미치는 인자는 주정/초순수 부피비이었다. 반응표면분석법을 이용하여 추출공정의 최적화과정을 수행한 결과 최적추출조건은 추출시간(19.92 min), 주정/초순수 부피비(54.23 vol%), 초음파 조사세기(557.65 W)로 나타났다. 이 조건으로부터 예상되는 반응치의 값은 추출수율(38.93 wt%), DPPH 라디칼소거활성(55.33%)으로 나타났다.