• KIEAE Journal
• /
• v.2 no.3
• /
• pp.63-70
• /
• 2002

This study aims to provide the fundamental date of HUANGTO GUDUL for applying to current house heating system. It has been used as a traditional heating system in Korea for a long time and disappeared in the course of industrialization in Korea last a few decades and these days is tend to be widely adopted as house heating system. Even though it is known that the traditional heating system of HUANGTO GUDUL is good for ecological environment house and a kind of the natural friendly heating system for optimum residential heating environment, there are few systematic researches and analysed data of it. In order to analyse the characteristics of HUANGTO GUDUL, the existing materials of it's historical change was studied. And the architectural prospects of the use of GUDUL on the point of view of environmental ecology. The data of relationship between the mechanic properties and the workability of GUDUL materials and the environmental index such as the heating environment, relative humidity, and deodorization ratio and so on. And the heating effectiveness of GUDUL was compared with existing modem materials by experimental analysis. The results stated above can be grafted architecture and will be offered the optimum heating environment.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1726-1728
• /
• 2003

The aging diagnosis method using partial discharge measurement detects discharge signals that critical cause of failure in insulation material operated a long time and can diagnose aging state of insulation materials with an aging analysis algorithm. The HFPD measurement method is a technique to analyze aging state of high voltage insulation materials and detect higher frequency signals than conventional PD measurement method therefore it takes less noise effect and could execute active line measurement. It is possible to analyze main discharge phenomena and obtain access to aging progress occurred in insulation materials through accumulation of HFPD signals during determined interval and expression of fractal dimension using statistical process of accumulated signals. The HFPD signals that occurred in each applied voltages are measured during 180 cycles and accumulated to the same phase of one cycle. These patterns that made by previous method are normalized with logarithm function and than inputted to neural networks. The aging diagnosis of insulation material was possible and the recognition ratio of neural network appeared very high.

• Proceedings of the Korea Contents Association Conference
• /
• 2018.05a
• /
• pp.375-376
• /
• 2018

본 연구는 20대 성인 손의 감각에 감각입력 훈련시 장악력과 기민성 차이를 알아보고자 하였다. 연구결과 훈련군에서 대조군보다 장악력 및 기민성과 감각역치의 높은 상승률을 나타냈다. 감각입력훈련이 대뇌겉질의 감각수용영역의 크기를 확대시켜 체성 감각시스템의 민감도를 향상시켜 기민성과 감각 향상을 높인 것으로 생각된다. 따라서 근력운동과 감각입력 사이의 적절한 상황 판단을 통한 효율적 사용을 추천한다.

• Journal of Satellite, Information and Communications
• /
• v.9 no.4
• /
• pp.42-46
• /
• 2014

In this paper, a coil typed electromagnetic band gap (EBG) structure to be inserted in the printed circuit board (PCB) inner layer in order to stabilize the PCB power line is proposed and implemented for global-navigation satellite service (GNSS) with the bandwidth from 1.55GHz to 1.81GHz. From the measurement result of the PCB board including EBG structure, the insertion loss(S21) was measured below about -50dB. From these results, it is expected that the stabilization of power delivery network (PDN) structure in the PCB circuit design should be improved and the preparation to EMI will be effective.

• Journal of the Korean Society of Safety
• /
• v.24 no.1
• /
• pp.1-6
• /
• 2009

In machining of ceramic materials, they are very difficult-to cut materials because of there high strength and hardness. Machining of ceramics are characterized by cracking and brittle fracture. Generally, ceramics are machined using conventional method such as grinding and polishing. However these processes are generally costly and have low MRR(material removal rate). This paper focuses on machinability evaluation of machinable ceramics for products with CNC machining center. Thus, in this paper, experiment applying cutting parameters is performed based on experimental design method. A design and analysis of experiments is conducted to study the effects of these parameters on the surface roughness by using the S/N ratio, analysis of ANOVA, and F-test. And multiple linear regression analysis is applied to compare experimental with predicted data in consideration of surface roughness. Cutting parameters, namely, feed, cutting speed and depth of cut are used to accomplish purpose of this paper. Required experiments are performed, and the results are investigated.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.2
• /
• pp.159-166
• /
• 2014

The study is conducted on the subject of optimization of components sizing for series hybrid electric propulsion systems. The components sizing of series type hybrid system is very important because each component of series type is larger than the corresponding component of the parallel type or series-parallel type. If the components sizing is greater or less than what is required to this system, the performance of the system is getting worse. The methodology for the sizing of a driving motor is introduced based on the foundation of determined system configuration and performance target. And the sizing of an engine/generator and a battery is achieved based on simulation results using Dynamic Programming. It is possible to find the optimal sizing of these components by comparing fuel efficiency of hybrid electric propulsion system for 8 driving cycles.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.271-271
• /
• 2007

LTCC 소재는 glass/ceramic composite로 구성된다. LTCC 소재에 embedding 되는 고유전율 소재 또한 이와 같은 소재설계를 통하여 무수축 접합이 가능할 것으로 판단된다. 그러나 이에 대한 연구결과가 보고된바 없고 몇몇 $Al_2O_3$의 infiltration에 대한 무수축 소성 관련 선행 연구를 바탕으로 고유전율 소재인 $BaTiO_3$의 무수축 소성이 연구되는 것이 필요한 시점이다. 따라서 본 연구는 저온에서의 glass infiltration에 의한 무수축 $BaTiO_3$ layer의 저온소성특성 및 유전특성을 평가하였다. 실험결과 $785^{\circ}C$에서 glass의 충분한 침투가 확인되며 결정구조에서는 glass/$BaTiO_3$ composite이 형성되었다. 무수축 접합 layer의 소성조건과 glass 두께 변화에 따른 유전특성 및 layer의 결정구조를 비교평가 하였다.

• Journal of Veterinary Clinics
• /
• v.24 no.2
• /
• pp.125-129
• /
• 2007

Artemisia capillaris THUNB is a perennial herb that belongs to the family Compositae spp and the most common plant among the various herbal folk remedies used in treatment of abdominal pain, hepatitis, chronic liver disease, jaundice and coughing in Korea. This experiment was conducted to investigate the inhibitory effects of orally administrated Artemisia capillaris extracts on the pathogenic bacteria in 200 ICR mice. The experimental groups showed inhibitory effects on the bacteria in $1{\sim}3$ days after inoculation. After 21 days of inoculation, no viable bacterial cells appeared in the feces of both experimental groups while they did appear in the control group. The results of these studies indicate Artemisia capillaris extract exhibited excellent antimicrobial and inhibitory effects on the food poisoning pathogenic bacteria; S. enteritidis, E. coli O157:H7, L. monocytogenes and S. aureus.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.29 no.3
• /
• pp.246-255
• /
• 2015

The purpose of this study is to investigate the reliability and validity of the questionnaire of pattern identification (PI) in traditional chinese medicine (TCM), through the systematic review of china national knowledge infrastructure (CNKI) database. We searched the articles related with reliability and validity of the questionnaire of PI and published from January 1994 to December 2013. Seventeen questionnaires were analyzed in this study. The twelve (70.6%) questionnaires were developed on the base of specific disease, and five (29.4%) ones were developed on the base of non-specific disease. Three of PI questionnaires showed low inter-item consistency reliability. Exploratory factor analysis of construct validity, content validity, and criterion validity analysis were commonly used on the assessment of validity, but none of them was analysed at the same study. There was only one questionnaire of the ischemic stroke that examined the sensitivity and specificity of both training and test groups in spite of the absence of a gold standard.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.10b
• /
• pp.388-392
• /
• 2007

계속적으로 변화하는 방대한 양의 EMS 데이터를 실시간 취득하여, 사용자가 원하는 데이터만 추출해서 원하는 포맷으로 저장하여 추후 활용할 수 있는 HDMS 시스템에 대하여 소개한다. HDMS 시스템은 K-EMS 과제의 일부분으로 개발되었다. 공유메모리를 사용하여 데이터를 처리하는 실시간 DBMS로부터 추출된 대용량 데이터를 고속으로 디스크 DBMS로 입력하고, 데이터 손실에 대한 Risk를 감소시키기 위하여 동적인 파티션 추가삭제를 통하여 자동으로 분산저장하며, 자동 백업 기능을 제공하여 사용자의 편의성을 증진한다. 데이터를 장기간 보관하고, 보관된 데이터에 대한 데이터 검색 기능을 제공하기 위하여 백업과 관련된 메타데이터를 관리한다. 관리된 메타데이터를 이용하여 사용자의 요구에 의해 백업파일을 시스템에 자동으로 복구하여 온라인 보관주기가 경과한 데이터에 대해 조회가 가능하도록 한다. HDMS시스템은 CIM 기반으로 데이터베이스가 구축되어 향후 K-EMS 외의 타 시스템과의 데이터 통합 및 연계가 용이하고 여러 분야에서 데이터 재활용이 가능할 것으로 예상된다.