1 |
G. Zhang, L. Qi and Y. Cao, 'Assessment of Machin -ing Performance of Dental Ceramics', Trans. of NAMRI/SME, Vo1.26, pp. 10-110, 1998
|
2 |
B. H. Van, F. Y. Guang and H. M. Chow, 'Study on the Turning Characteristics of Alumina-based Ceramics', J. ofMPT, Vol. 54, pp. 341-347,1995
DOI
ScienceOn
|
3 |
Z. Y. Wang, K. P. Rajurkar and M. Murugapan, 'Cryogenic PCBN turining of ceramic ', Wear, Vol. 196,pp. 1-6, 1996
DOI
ScienceOn
|
4 |
W. H. Yang and Y. S. Tarng, 'Design optimization of cutting parameters for turning operations based on the Taguchi method', Journal of Materials Processing Technology, Vol. 84, pp. 122-129, 1998
DOI
ScienceOn
|
5 |
G. Zhang, Y, Cao and L. Qi, 'Single Point Cutting of Machinable Glass Ceramics', Trans. of NAMRI/SME, Vol. 27,pp. 159-164, 1999
|
6 |
J. P. Davim, 'Study of drilling metal-matrix composites based on the Taguchi Techniques', Journal of Materials Processing Technology, Vol. 132, pp. 250-254,2003
DOI
ScienceOn
|
7 |
Y. L. Su, S. H. Yao, C. S. Wei and Wu. C.T, 'Analyses and design of a WC milling cutter with TiCN coating', Wear, Vol. 215, pp. 59-66,1998
DOI
ScienceOn
|
8 |
S. M. Jang, M. W. Cho, W. S. Cho and J. H. Lee, 'Evaluation of R-curve Behavior Analysis and Machinability of -hBN Machinable Ceramics', KSPE, Vol. 21, No.1, pp. 61-70, 2004
|
9 |
M. S. Hong and Z. M. Lian, 'The optimal selection of cutting parameters in turning operations', Transaction of NAMRI/SME, Vol. XXIX, pp. 319-325, 2001
|