• Journal of Environmental Health Sciences
• /
• v.22 no.2
• /
• pp.104-113
• /
• 1996

Cadmium uptake by growing and nongrowing (intact) cells of a chdmium-tolerant yeast Hansenula anomala B-7 in the presence of surfactants was studied. In growing cultures the addition of Triton X-100 or Tween 80 increased cadmium uptake by about 30% with no inhibition of cell growth, and in intact cells Triton X-100 increased cadmium accumulation by about 80% compared to surfactant-free controls. Considering balance between increased uptake and pollution, the addition of 0.1% Triton X-100 was preferable. By the mixed addition with defoamer silicone, during growth of cells Tween 80 or Triton X-100 enhanced uptake efficiency of cadmium compared to its single addition, whereas in intact biomass each of surfactants tested had no significant effect on cadmium uptake. The uptake of cadmium was observed to rise sharply to a maximum and then declined with increasing pH, and maximum accumulation of cadmium by growing and intact cells occurred at the pH of 6.0 and 7.0, respectively. A significant increase in cadmium uptake occurred with shaking culture. Cadmium uptake by growing and intact cells was almost completed during the culture time of 72 or 24 hrs, respectively. Scalded cells sorbed much more cadmium-ion than living cells.

• Microbiology and Biotechnology Letters
• /
• v.17 no.5
• /
• pp.468-474
• /
• 1989

The cultural condition for polysaccharide production by Pseudomonus detafietdii was studied. The optimal medium contains the following composition per liter of distilled water: glucose (25g/$\ell$), peptone (2.06g/$\ell$), KH$_2$PO$_4$(2g/$\ell$), MgSO$_4$.7$H_2O$ (2g/$\ell$), yeast extract (0.5g/$\ell$), CaCO$_3$(2.5g/$\ell$). The temperature and pH optimum were 3$0^{\circ}C$ and 6.5. The agitation speed was 300 rpm. 5.91g of polysaccharide was produced at the condition in flask culture.

• Journal of Microbiology and Biotechnology
• /
• v.15 no.5
• /
• pp.930-937
• /
• 2005

The Plackett-Burman design and the response surface method (RSM) with a central composite design (CCD) were employed to develop a culture medium for ansamitocin P-3 production using Actinosynnema pretiosum ATCC 31565. Among the 11 nutrients tested using the Plackett-Burman design, two carbon sources, sucrose and dextrin, and two nitrogen sources, polypeptone and yeast extract, were selected. Optimization of the concentrations of the selected nutrients was then performed using RSM with CCD. After two rounds of RSM, the optimum concentrations ($\%w/v$) of sucrose, dextrin, polypeptone, and yeast extract were identified as 4.5, 4.5, 0.16, and 0.89, respectively. The maximum ansamitocin P-3 titer was 45.2 mg/l with the optimized medium, which was about 6 times higher than that (7.315 mg/l) obtained with an $R_{2}YE$ medium before optimization.

• Microbiology and Biotechnology Letters
• /
• v.30 no.4
• /
• pp.346-351
• /
• 2002

A bacterium producing the neutral pretense was isolated from soil, and was identified as Bacillus sp. DS-1 by 16S rRNA sequence comparison and biochemical determinations. The production of protease from Bacillus sp. DS-1 was increased 20% and 30% by the additions of 1% glucose and 1% yeast extract, respectively. The optimum pH and temperature for the protease activity were pH 7.0 and 55$^{\circ}C$. Bacillus sp. DS-1 produced a metalloprotease as a major protease in culture medium, since the pretense activity in culture supernatant was inhibited by the presence of 1 mM EDTA significantly.

• The Korean Journal of Mycology
• /
• v.22 no.4
• /
• pp.286-297
• /
• 1994

The optimum nutritional and cultural conditions of polygalacturonase by Ganoderma lucidum in liquid culture were studied. The optimal temperature, pH, and the duration of culture for production of the enzyme was $30^{\circ}C$, 5.5 and 14 days, respectively. The maximal production of the enzyme was obtained in a synthetic medium containing 10 g of pectin, 10 g of soluble starch, 1 g of yeast extract, 2 g of peptone, 1 g of phenylalanine, 2 g of $KH_2PO_4$, 0.2 g of $MgSO_4{\cdot}7H_2O$, 0.05 g of $CaCI_2$ and 100 g of $thiamin{\cdot}HCI$ in 1000 ml of distilled water.

• KSBB Journal
• /
• v.11 no.5
• /
• pp.550-556
• /
• 1996

A complex medium was developed for the production of microbial cellulose by Acetobacter xylinum ATCC 23769. The optimum concentration of each nutrient for the production of microbial cellulose was determined to be 10g peptone, 20g yeast extract, 5g glucose, 1.56g Na2HPO4, 1.8g KH2PO4, 0.05g MgSO4, 0.002g FeCl3, 5g citric acid and 10 mL ethanol per liter. With synergistic effects of citric acid and ethanol, cellulose productivity achieved in developed medium was 0.446 gram of cellulose per gram glucose for static culture, which is much higher than reported values. Cell growth and the cellulose production in the developed medium under static culture was also investigated.

• Applied Biological Chemistry
• /
• v.47 no.3
• /
• pp.287-292
• /
• 2004

The optimum conditions for lignin peroxidase production were studied. Lignin peroxidase was produced almost exclusively in stationary culture with the optimum media composition of malt extract 1 g, yeast extract 0.4 g, glucose 0.4 g and distilled water 100 ml. Tween 80 at 0.005% concentration and veratryl alcohol at 0.4 mM were very effective inducers for lignin peroxidase production.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.9
• /
• pp.1338-1346
• /
• 2006

Ansamitocin P-3 is a potent antitumor agent produced by A. pretiosum. A deletion mutant of A. pretiosum was constructed by deleting the asm2 gene, a putative transcriptional repressor. The deletion mutant showed a 9-fold enhanced ansamitocin P-3 productivity. The response surface method with central composite design was employed to further optimize the culture medium composition for ansamitocin P-3 production by the deletion mutant. The concentrations of four medium ingredients, dextrin, maltose, cotton seed flour, and yeast extract, which have been reported as major components for ansamitocin production, were optimized through a series of flask culture experiments. The optimum concentrations of the selected factors were found to be dextrin 6.0%; maltose 3.0%; cotton seed flour 0.53%; and yeast extract 0.45%. The maximum titer of ansamitocin P-3 was 78.3 mg/l with the optimized composition, about 15-folds higher than the unoptimized titer of 5.0 mg/l obtained with YMG medium.

• Journal of Life Science
• /
• v.10 no.1
• /
• pp.101-106
• /
• 2000

A bacterial strain BS-214 producing extracellular pectinase was isolated from soil. The isolated bacterium was identified as a strain of Bacillus so. based on the morphological, biochemical, and physiological characteristics. Cell growth and pectinase activity of Bacillus sp. BS-214 were reached to a mixium in the culture condition of pH 8.5 at 4$0^{\circ}C$. Production of pectinase by the strain was the highest when polygalacturonic acid was added to culture medium as a carbon source, and its optimal concentration was 1%. Also, yeast extract was used as the best nitrogen source for the production of pectinase by the concentration of 0.25%. Decomposition of a constituent of Edzeworthia papyrifera by the strain was observed by scanning electron microscope.

• Microbiology and Biotechnology Letters
• /
• v.24 no.5
• /
• pp.560-566
• /
• 1996

A strain capable of producing thermostable chitinase suitable for chitooligosaccharide production was isolated from high temperature environment and identified as Bacillus licheniformis. The chitinase from Bacillus licheniformis KFB-Cl4 was only induced by addition of colloidal thitin into the basal medium as carbon source, showing the decrease of the chitinase production by supplernental addition of other carbon sources into the medium containing 1.0% colloidal chitin. Among organic and inorganic nitrogen sources, yeast extract was the most effective for the increase of total activity and specific activity, and had high affinity for the enzyme production. The optimum temperature of cell growth and thermostable chitinase production was 55$\circ$C. The optimum culture medium was composed of 1.2% colloidal chitin, 0.15% K$_{2}$HPO$_{4}$, 0.05% KH$_{2}$PO$_{4}$, 0.01% MgSO$_{4}$-7H$_{2}$O, 0.1% yeast extract (pH 6.5). Bacillus licheniformis KFB-C14 produced the thermostable chitinase of 3.89 units per ml culture fluid and 7.4 units per mg protein under rotary shaking at 150 rpm for 40 hr.