• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.7
• /
• pp.21-29
• /
• 1989

Using Fresnel diffraction theory a formula is drived for signal intensity variation caused by finite strip obstacles. Signal intensity according to parameter variation of the obstacle is theoretically calculated by a computer and compared with experimental results. For the experiment, an acryl board 3 mm thick was used on which a special material was painted to prevent some reflections and transmissions of the incident wave. 10-element Yagi antennas were used for transmitting and receiving antenna and the frequency was 820 MHz. Finally a tree model was made as a combination of many different finite strip obstacles. Signal attenuation calculated from numerical analysis agree reasonably with experimental data.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.12
• /
• pp.1410-1415
• /
• 2008

This paper proposes an small electronically steerable parasitic array radiator composed of a uniplanar dipole as a feeding element and two dipoles as parasitic elements. The fabricated antenna shows by measurement the $3.3{\sim}4.3\;dB$ gain between $-100{\sim}1000$ azimuth range in the dipole vertical plane and -10 dB return loss within $5.4{\sim}5.9\;GHz$, which includes $5.725{\sim}5.825\;GHz$ UNII band.

• Journal of Korea Society of Industrial Information Systems
• /
• v.15 no.2
• /
• pp.11-16
• /
• 2010

In this papar, we have proposed a small electronically steerable parasitic array radiator with 180 degree azimuth beam coverage and high gain characteristics. The proposed antenna is composed of a uniplanar Yagi dipole as a feeding element and two dipoles as parasitic elements. The fabricated antenna is tested by electronically changing the reactance loaded on the parasitic dipoles and the results show that it has 5.2dB~6.7dB gain in $-90^{\circ}{\sim}90^{\circ}$wide azimuth range and -10dB return loss characteristics within 5.725GHz~5.825GHz UNII band.

• Korean Journal of Environment and Ecology
• /
• v.24 no.4
• /
• pp.487-492
• /
• 2010

This study was conducted to analyze the home range size of Pipistrellus abramus in non-reproductive season. The survey was conducted in the day-roosting site of Pipistrellus abramus located in Gyeongju City(North Gyeongsang Province). We radio-tracked six Pipistrellus abramus(male 3, female 3) and LTM single stage radio transmitter(0.38g), R2000 ATS receiver, three element yagi antenna, roof mounted antenna and ArcGIS 3.3(ESRI, Animal Movement Extension 2.0) were used to locate bats and home range analyze. The home range sizes of the 6 radio-tracked Pipistrellus abramus ranged from 8.97 to 19.07ha(Maen $14.46{\pm}3.44ha$). Mean home range size of female($16.83{\pm}1.96ha$) was larger than that of male($12.08{\pm}2.96ha$) but there were no significant differences in home range sizes between male and female(t=2.32, p>0.05). Also, mean maximum distances from the roost was $468.73{\pm}94.38m$ but there were no significant differences between sexes(female, $422.73{\pm}10.38m$; male, $514.74{\pm}125.74m$; t=-1.26, p>0.05).

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.6
• /
• pp.788-801
• /
• 1998

Meteor Burst Communication can provide effective and economical means of communication where long distance VHF NLOS data transmission is needed ; often ranges more than 1000 km. It has been, however, so far considered unsuitable for short distance application because of phenomenal decrease in burst durations, which leads to decreation of total duty rate of the system. This paper extensively analyzes characteristics of shot distance MB(Meteor Burst) path and shows the low duty rate may be improved by increasing burst rate through adapting antennal beam width to cover entire hot-spot region in the space and, by compensating effective burst length throughcutting down man-made noises introduced by antennal. Based on the analysis, we are developed a small-opening-cavity antennal, especially designed for short distance MB path. In operation, the antenna is to be buried under ground surface so as to improve directivity and reduces noise introduction. The antennal exhibits power gain of 3 dB with 90 degree beam width and thus enables to illuminate entire hot-spot regions with the elevation angle of 8-90 degree which is the case of transmission less than 100 km. Directivity horizontal to earth surface is suppressed to minimum which enables to cut man-made noises from near-by sources down to more than 3 dB from the level reported with conventional 4 element Yagi. A series of experiments performed on 100km MB paths have conformed that, with the antenna installed at receiving site, the burst rate and duration time have been noticed to increase by 10 and 20 percent respectively from the values obtained by conventional 4-element Yagi antennal under same testing condition.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.4
• /
• pp.1908-1914
• /
• 2013

In this paper, we introduce a design method for a broadband planar quasi-Yagi antenna (QYA) for terrestrial digital television (DTV) reception. The coplanar strip line which feeds the driver dipole is connected to a microstrip line and is terminated by short circuit. By appending a wide strip-type rectangular director at a location close to the driver dipole, broadband impedance matching and gain enhancement in a high frequency region are obtained. The gain characteristics in a low frequency region are improved by adding a reflector formed by a truncated ground plane. To reduce the antenna size, the strip-type dipole and reflector are modified to half bow-tie (V)-shaped elements. The effects of various parameters on the antenna characteristics are examined. An antenna, as a design example for the proposed antenna, is designed for the operation in the frequency band of 470-806 MHz for terrestrial DTV. The optimized antenna is fabricated on an FR4 substrate and the experimental results show that the antenna has a good performance such as a frequency band of 450-848 MHz for a VSWR < 2, gain > 4.1 dBi, and front-to-back ratio > 10.4 dB.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2006.07a
• /
• pp.252-252
• /
• 2006

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.201-202
• /
• 2003

We developed a novel growth method of aligned carbon nanotubes. Aligned carbon nanotubes are grown on a metal catalyst on a glass substrate using biased Helicon plasma chemical vapor deposition (HPECVD) of $CH_4/H_2$ gases from 400 C to 500 C. The Helicon plasma source is one of the high-density plasma sources and is promising for low temperature carbon deposition. A Ni film was used as a catalyst to reduce the activation energy of the nanotubes' growth. The carbon nanotubes were deposited on the nickel catalysis layer selectively.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2006.05a
• /
• pp.202-207
• /
• 2006

• Proceedings of the Korean Society of Potoscience Conference
• /
• spring
• /
• pp.94-95
• /
• 1999