• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.1
• /
• pp.41-47
• /
• 2016

This paper presents a bond test to find the effect of shear key and edge length from the bonded FRP in near surface-mounted(NSM) retrofit using FRP plate. Main parameters in the test are the location and size of shear key and the edge length. For the test, 10 specimens were made by embedding FRP plate of $3.6mm{\times}16mm$ into $400mm{\times}200(300)mm{\times}400mm$ concrete block and fixing it by using epoxy. Tensile load was applied to the FRP of the specimens until failure and was recorded at each load increase. In addition, the bond slip and elongation of FRP were measured during the test. From the test, it was found that the further the shear key located from the loading, the higher strength we could get. The bond strength inversely depended on the size of shear key. Especially, when the size of shear key was to be lagger than certain size, the bond strength decreased to very low value; even less than that of the case without shear key. The bond strength somewhat increased corresponding to the increase of edge length from the bonded end of FRP to loading in spite of same bond length. The bond-slip between FRP and concrete governed overall deformation in the bond test of NSM FRP so that the effect of excessive slip is necessary to be considered in the design.

• Restorative Dentistry and Endodontics
• /
• v.30 no.5
• /
• pp.385-392
• /
• 2005

The purpose of this study was to observe the effect of canal filling on the bacteria left in the dentinal tubules and to compare the sealing ability between Gutta-percha and Resilon. The bovine dentin block models were prepared E. faecalis was inoculated to dentin blocks and incubated. The dentin blocks were divided into 5 groups. Group 1 was the negative control. Group 2 was the positive control. Group 3 was filled with ZOE based sealer and Gutta-percha, Group 4 with resin based sealer and Gutta-percha, and Group 5 with resin based sealer and Resilon. After 24 hour, the blocks were incubated at $37^{\circ}C$ for 1, 2, 3 and 4 weeks on BHI agar plates. The internal dentin portion of the blocks was removed using ISO 027, 029, 031, 035 round burs and the dentin chips were incubated at $37^{\circ}C$ for 24 hour Following incubation, the optical density of the medium was measured. The data were statistically analysed using repeated measures ANOVA and one-way ANOVA. The results were as follows, 1. There. was statistically significant reduction in the number of E. faecalis of the group where dentinal tubules were completely sealed with nail varnish in comparison with the groups obturated with gutta-percha or resilon (p < 0.05). 2. In group 5, the number of E. faecalis in the dentinal tubules decreased significantly with time (p < 0.05). whereas in Group 3 and 4, there was no reduction in its number (p > 0.05). 3. Under the conditions of this experiment, E. faecalis survived up to 4 weeks after obturation with gutta-percha or resilon (p > 0.05).

• Restorative Dentistry and Endodontics
• /
• v.30 no.5
• /
• pp.393-401
• /
• 2005

The purpose of this study was to compare the canal configuration after shaping by ProTaper rotary files and ProTaper hand files in resin simulated canals. Forty resin simulated canals with a curvature of J-shape and S-shape were divided into four groups by 10 blocks each Simulated root canals in resin block were prepared by ProTaper rotary files and ProTaper hand files using a crown-down pressureless technique All simulated canals were prepared up to size $\#25$ file at end-point of preparation. Pre- and post-instrumentation images were recorded with color scanner. Assessment of canal shape was completed with an image analysis program. Measurements were made at 0, 1, 2, 3, 4, 5, 6 and 7 mm from the apex. At each level, outer canal width, inner canal width, total canal width, and amount of transportation from original axis were recorded. Instrumentation time was recorded. The data were analyzed statistically using independent t-test. The result was that ProTaper hand files cause significantly less canal transportation from original axis of canal body and maintain original canal configuration better than ProTaper rotary files, however ProTaper hand files take more shaping time.

• Restorative Dentistry and Endodontics
• /
• v.25 no.3
• /
• pp.435-445
• /
• 2000

The purpose of this study was to compare the leakage of four different obturation techniques in conjunction with immediate apical barrier of ${\beta}$-tricalcium phosphate(TCP) in teeth with open apex. Eighty single-rooted human premolar teeth were prepared and sectioned horizontally, so maximum diameter in apex was 4mm. Apical defects that were similar to open apex, were created with #1/2 round bur and SF104R bur. The apical foramen were opened to a size 80 file extended 3mm beyond the apex. The teeth were placed into the oasis block soaked saline to simulate periapical tissue often associated with pulpless teeth and received apical barriers consisting of TCP followed by obturation using lateral condensation technique, vertical condensation technique, continuous wave technique and thermoplasticized gutta-percha injection technique. Two unobturated teeth served as positive and negative controls. Teeth were immersed in resorcinol-formaldehyde resin for S days at $4^{\circ}C$, and the resin was allowed to polymerize completely for 4 days at room temperature. Teeth were then sectioned horizontally at 1.5mm(level 1), 2.5mm(level 2) and 3.5mm(level 3) from the apex, and examined under a stereomicroscope at ${\times}40$ magnification. The photographs were taken at ${\times}40$ magnification of the filling in each level and scanned. The leakage length in tooth/resin interface was measured at each of the three levels. Each ratio of leakage was obtained by calculating the ratio of the leakage length of canal wall infiltrated with resin to the total length of the canal and was analyzed statistically(One-way ANOVA and Scheffe test). The result were as follows : 1. At the level 1, there was the least leakage in the thermoplasticized gutta-percha injection technique group(group 4), but there was statistically significant(p<0.05). 2. At the level 2, there was the least leakage in the thermoplasticized gutta-percha injection technique group(group 4), and the most leakage in the continuous wave technique group(group 3). There was statistically significant difference between the thermoplasticized gutta-percha injection technique group and the continuous wave technique group(p<0.05). 3. At the level 3, there was the least leakage in the thermoplasticized gutta-percha injection technique group(group 4), but there were no statistically significant differences between other groups(p>0.05). These results suggest that thermoplasticized gutta-percha injection technique which had 1mm apical gutta-percha matrix after the formation of TCP apical barrier, can demonstrate favorable apical sealing.

• Journal of Korean Society of Forest Science
• /
• v.85 no.4
• /
• pp.619-633
• /
• 1996

This study was carried out from March 1995 to February 1996 to select suitable vegetation and measures for revegetation on the highway cut-slope in consideration of the surrounding environment in the middle region of Korea. The numbers of revegetation-measures type surveyed were eighteen measures as a whole in descending order of the Seed-spraying measures, Block-sod pitching measures, and Straw-mat mulching measures. The numbers of vegetation species by highway line were 243 in Chungbu, 223 in Jungang, 210 in Kyongbu 2, 199 in Kyongbu 1, 179 in Sohaean, 163 in Seoul circulation. 148 in Shingal-ansan, 141 in Second kyongin and 123 in Kyongin respectively. The highest index of species diversity(H') was in Kyongbu 1-line and the evenness(E') on upper site was greater than that of the lower site. The revegetation measures were selected in consideration of nature of soil, gradient, area and situation, and 83 species were selected as those for revegetation measures in highway cut-slope.

• Spatial Information Research
• /
• v.21 no.4
• /
• pp.63-70
• /
• 2013

With the increasing use of high-performance mobile devices such as smartphones, users have been able to connect to the Internet anywhere, anytime, so that Location Based Services(LBSes) have been popular among the users in order to obtain personalized information associated with their locations. The services have advanced to provide the information realistically and intuitively by adopting Augmented Reality(AR) technology, where the technology utilizes various sensors embedded in the mobile devices. However, the services have inherent problems due to the small screen size of the mobile devices and the complexity of the real world environment. Overlapping contents on a small screen and user's possible movement should be taken into consideration in displaying the icons on objects that block user's environment such as trees and buildings. The problems mainly happen when the services use only user's location and sensor data to calculate the position of the displayed information. In order to solve the problems, this paper proposes a method that applies street data extracted from a digital map. The method uses the street data as well as the location and direction data to determine contents that are placed on both sides of a virtual street which augments the real street. With scrolling the virtual street, which means a virtual movement, some information far away from the location of the user can be identified without user's actual movement. Also the proposed method is implemented for region "Aenigol", and the efficiency and usefulness of the method is verified.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.27 no.2
• /
• pp.130-138
• /
• 2016

Objectives: The aim of this study was to develop auditory-verbal and visual-spatial memory tasks using smart devices for children aged 8 to 10 years and examine their validity. Methods: One-hundred and fourteen school-aged children were recruited through internet advertising. We developed memory tasks assessing auditory-verbal memory, visual-spatial memory, and working memory, and then examined their construct validity by examining the developmental trend of the children's mean scores with age. In order to examine the concurrent validity of the tasks, we conducted correlation analyses between the children's scores on the newly developed auditory-verbal, visual-spatial memory and working memory tasks and their scores on well-known standardized tests of memory and working memory, including the auditory-verbal memory subtests of the Korean Luria-Nebraska Neuropsychological Battery for Children, Korean Rey-Osterrieth Complex Figure Test, digit span and arithmetic subtest of Korean Educational Development Institute Wechsler Intelligence Scale for Children Revised, and Corsi block test. Results: The memory and working memory scores measured by the newly developed tasks tended to increase with age. Further, there were significant correlations between the scores of the four cognitive tasks and the corresponding scores of the standardized assessment tools. Conclusion: This study revealed promising evidence for the validity of the memory tasks using smart devices, suggesting their utility for school-aged children in research and clinical settings.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.42 no.6
• /
• pp.83-92
• /
• 2005

This paper presents a watermarking approach that the 1-level Discrete Wavelet Transform(DWT) coefficients of a $64{\ast}64$ binary logo image as watermarks are inserted in LL band and other specific frequency bands of the host image using Multi-Resolution Analysis(MRA) Wavelet transform for copyright protection of image data. The DWT coefficients of the binary logo image are inserted in blocks of LL band and specific bands of the host image that the 3-level DWT has been performed in the same orientation. We investigate Significant Coefficients(SCs) in each block of the frequency areas in order to prevent the quality deterioration of the host image and the watermark is inserted by SCs. When the host image is distorted by difference of the distortion degree in each frequency, we set the thresholds of SCs on each frequency and completely insert the watermark in each frequency of the host image. In order to be invisibility of the watermark, the Human Visual System(HVS) is applied to the watermark. We prove the proper embedding method by experiment. Thereby, we rapidly detect the watermark using this watermarking method and because the small size watermarks are inserted by HVS and SCs, the results confirm the superiority of the proposed method on invisibility and robustness.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.39 no.5
• /
• pp.11-20
• /
• 2002

Based on regularization principles, we propose a new dequantization scheme on DCT-based transform coding for reducing of blocking artifacts and minimizing the quantization error. The conventional image dequantization is simply to multiply the received quantized DCT coefficients by the quantization matrix. Therefore, for each DCT coefficients, we premise that the quantization noise is as large as half quantizer step size (in DCT domain). Our approach is based on basic constraint that quantization error is bounded to ${\pm}$(quantizer spacing/2) and at least there are not high frequency components corresponding to discontinuities across block boundaries of the images. Through regularization, our proposed dequantization scheme, sharply reduces blocking artifacts in decoded images. Our proposed algorithm guarantees that the dequantization process will map the quantized DCT coefficients will be evaluated against the standard JPEG, MPEG-1 and H.263 (with Annex J deblocking filter) decoding process. The experimental results will show visual improvements as well as numerical improvements in terms of the peak-signal-to-noise ratio (PSNR) and the blockiness measure (BM) to be defined.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.7
• /
• pp.56-64
• /
• 2012

A smart grid is the next generation power grid which combines the existing power grid with information technology, so an energy efficient power grid can be provided. In this paper, in order to build an efficient smart grid an AMI system, which gears with the existing home network and provides an user friendly management function, is proposed. The proposed AMI system, which is based on an extended home network, consists of various functional units; smart meters, communication modules, home gateway, security modules, meter data management modules (MDMM), electric power application modules and so on. The proposed home network system, which can reduce electric power consumption and transmit data more effectively, is designed by using IEEE 802.15.4. The extended home gateway can exchange energy consumption information with the outside management system via web services. The proposed AMI system is designed to enable two-way communication between the home gateway and MDMM via the Internet. The AES(Advanced Encryption Standard) algorithm, which is a symmetric block cipher algorithm, is used to ensure secure information exchange. Even though the results in this study could be limited to our experimental environment, the result of the simulation test shows that the proposed system reduces electric power consumption by 4~42% on average compared to the case of using no control.