• KOMUNHWA
• /
• no.70
• /
• pp.5-15
• /
• 2007

Octagonal green glass bottle with long neck(녹유리장경각병) was found in the tomb of the princess Hwayu who was King Youngjo's daughter by a concubine while the tomb was exhumed and buried in another place around Bucheon City, Gyeonggi-do. This octagonal glass bottle is dark green. It was made in AD 1736-A1795 because it was cngraved an inscription of "건륭년제" the bottom. This glass bottle was taken an X-ray radiography and tested adhesives and restoration materials for the conservation. Loctite 401 was suitable as considering the translucency of the glass bottle, good adhesive property and reversibility of the adhesive so it was chosen. A minute piece of the glass was analyzed the composition and lead isotope ratio. Major chemical composition of the glass bottle consisted of SiO2, K2O, and PbO system and the ratio was 68: 18.5:5.7. Green color of glass bottle was due to Fe2O3 and CuO. When the glass bottle was made, quartz as raw material of silica and K2O as natural saltpeter(KNO3) were utilized. As a result of lead isotope ratio analysis, it was suggested that the galena as raw material of lead for glass making came from the southern part of China. These results are expected to become useful data in background of glass culture and circulation study of old glass.

• Journal of the Korean Vacuum Society
• /
• v.16 no.6
• /
• pp.446-452
• /
• 2007

[ $(Pb_{1.1},La_{0.08})(Zr_{0.65}.Ti_{0.35})O_3$ ] thin films on the $Pt/Ti/SiO_2/Si$, $TiO_2(interlayer)/Pt/Ti/SiO_2/Si$ substrate were fabricated by the R.F. magnetron-sputtering method and considered their characteristics depending on $TiO_2$ interlayer. Changing the deposition conditions of $TiO_2$ interlayer, we obtained $TiO_2$ anatase single phase and rutile single phase. PLZT was deposited on these substrates and analyzed by x-ray diffraction(XRD) for there crystallinity and orientation. To investigate $PLZT-TiO_2$, $TiO_2-Pt$ interface, glow discharge spectrometer(GDS) analysis was carried out and we performed electrical measurements for dielectric properties of PLZT thin films. The PLZT thin film on $TiO_2$ anatase interlayer was found to have (110)-preferred orientation and 12.6 ${\mu}C/cm^2$ remaining polarization value.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1488-1491
• /
• 2006

본 연구에서는 실시간 통합 물관리 시스템의 일환으로 월별 일강수량 예측 시스템에 관한 연구를 실시하였다. 선행시간 2일 예측에 대해서는 기상청 생성 수치모의 RDAPS (Regional Data Assimilation and Prediction System)를 기반으로 강수진단모형인 QPM (Quantitative Precipitatiom Model)을 이용하여 지형효과를 보정하였으며, 선행시간 2일에서 8일까지의 예측에 대해서는 GDAPS (Global Data Assimilation and Prediction System) 모의결과를 QPM을 이용하여 보정하였고, 선행시간 10일 이후의 예측값은 통계적 기법을 이용한 자료를 활용하였다. 통계적 기법으로는 과거 20년간의 관측된 강수경향을 이용하여 시스템을 구축하였다. 강수진단모형 (QPM)은 Misumi et al. (2001), Bell (1978), Collier (1975)등이 제안한 바 있는 Collier-type의 모형으로서 이들 모형은 소규모 지형 효과를 고려한 강수량을 산출하는 진단 모형이다. QPM은 중규모 예측 모형으로부터 계산된 수평 바람, 고도, 기온, 강우 강도, 그리고 상대습도 등의 예측 자료를 이용하고, 중규모 예측 모형에서는 잘 표현되지 않는 소규모 지형 효과를 고려함으로써 중규모 예측 모형에서 생산된 상대적으로 성긴 격자의 강수량 예측 값을 상세 지역의 지형을 고려한 강수량 예측 값으로 재구성하게 된다. QPM은 중규모 모형으로부터 나온 자료를 초기 자료로 이용하고 3 km 간격의 상세 지형을 반영하는 모형으로 소규모 지형 효과를 표현함으로써 상세 지역에서의 강수량 산출과 지형에 따른 강수량의 분포 파악이 용이할 뿐 아니라, 계산 효율성을 개선시킬 수 있다.착능이 높은 것으로 사료되었다.X>${\mu}_{max,A}$는 최대암모니아 섭취률을 이용하여 구한 결과 $0.65d^{-1}$로 나타났다.EX>$60%{\sim}87%$가 수심 10m 이내에 분포하였고, 녹조강과 남조강이 우점하는 하절기에는 5m 이내에 주로 분포하였다. 취수탑 지점의 수심이 연중 $25{\sim}35m$를 유지하는 H호의 경우 간헐식 폭기장치를 가동하는 기간은 물론 그 외 기간에도 취수구의 심도를 표층 10m 이하로 유지 할 경우 전체 조류 유입량을 60% 이상 저감할 수 있을 것으로 조사되었다.심볼 및 색채 디자인 등의 작업이 수반되어야 하며, 이들을 고려한 인터넷용 GIS기본도를 신규 제작한다. 상습침수지구와 관련된 각종 GIS데이타와 각 기관이 보유하고 있는 공공정보 가운데 공간정보와 연계되어야 하는 자료를 인터넷 GIS를 이용하여 효율적으로 관리하기 위해서는 단계별 구축전략이 필요하다. 따라서 본 논문에서는 인터넷 GIS를 이용하여 상습침수구역관련 정보를 검색, 처리 및 분석할 수 있는 상습침수 구역 종합정보화 시스템을 구축토록 하였다.N, 항목에서 보 상류가 높게 나타났으나, 철거되지 않은 검전보나 안양대교보에 비해 그 차이가 크지 않은 것으로 나타났다.의 기상변화가 자발성 기흉 발생에 영향을 미친다고 추론할 수 있었다. 향후 본 연구에서 추론된 기상변화와 기흉 발생과의 인과관계를 확인하고 좀 더 구체화하기 위한 연구가 필요할 것이다.게 이루어질 수 있을 것으로 기대된다.는 초과수익률이 상승하지만, 이후로는 감소하므로, 반전거래전략을 활용하는 경우 주식투자기간은 24개월이하의 중단기가 적합함을 발견하였다. 이상의 행태적 측면과 투자성과측면의 실증결과를 통하여 한국주

• The Journal of Korean Orthopaedic Ultrasound Society
• /
• v.6 no.1
• /
• pp.1-9
• /
• 2013

Purpose: The purpose is to perform objective evaluation for rotator cuff using ultrasonography and validate factors influencing cuff integrity as well as efficacy of follow-up ultrasonography after unreamed antegrade intramedullary nailing for humerus fracture. Materials and Methods: Seventeen patients with an average age of $55.7{\pm}18.6$ years underwent antegrade intramedullary nailing for humerus fracture and follow-up ultrasonography of shoulder joint. Mean follow-up period was $43.5{\pm}32.2$ months. Intraoperative evaluation for preoperative cuff tear was performed, of which four cuffs were repaired by single row repair technique. Clinical evaluation included visual analogue scale (VAS), range of motion, Korean Shoulder Scoring System (KSS) and American Shoulder and Elbow Society (ASES) score. Ultrasonographic evaluation was performed on cuff integrity and protrusion of proximal nail tip as well. Radiographic evaluation included time to union, protrusion of proximal nail tip and migration of proximal interlocking screw which could affect shoulder joint function. Results: Mean VAS at last follow-up was $1.65{\pm}1.84$ points. Range of motion showed forward flexion of $137.0{\pm}33.5^{\circ}$, external rotation of $43.5{\pm}12.7^{\circ}$ and internal rotation of $16.4{\pm}2.0^{\circ}$ while KSS score and ASES score were $79.6{\pm}20.7$ and $83.7{\pm}17.0$ points, respectively. Bone union was demonstrated in all cases and average time to union was $3.4{\pm}1.3$ months. Migration of proximal interlocking screw was shown in 6 cases (35%). On ultrasonographic evaluation, there were normal in 8 (47%), weaving in 4 (24%), partial tear in 5 cases (29%), but no complete tear. Protrusion of proximal nail tip was demonstrated in 8 cases (47%) on plain radiographs whereas in 11 cases (65%) on ultrasonography and was associated with increasing age (p=0.038). Ultrasonographic weaving and partial tear was associated with protrusion of proximal nail tip (p=006), but not with repair of preoperative tear (p>0.05). Conclusion: Because weaving and partial tear on ultrasonography originated from protrusion of proximal nail tip, careful insertion of nail and meticulous repair of cuff during operation lead to stable fixation with satisfactory recovery of shoulder function follow-up ultrasonography can be a useful tool for evaluating protrusion of nail tip and rotator cuff tear, of which diagnosis is difficult on plain X-ray after antegrade intramedullary nailing for humerus fracture.

• Korean Journal of Materials Research
• /
• v.8 no.10
• /
• pp.945-949
• /
• 1998

Ta(OC2H5)5와 NH3를 이용하여 Cycle-CVD법으로 산화탄탈륨 막을 증착하였다. Cycle-CVD법에서는 Ta(OC2H5)5와 NH3사이에 불활성 기체를 주입한다. 하나의 cycle은 Ta(OC2H5)5주입, Ar주입, NH3 주입, Ar 주입의 네 단계로 이루어진다. Cycle-CVD법으로 산화탄탈륨 막을 증착할 때, 온도 $250-280^{\circ}C$에서 박막의 증착 기구는 원자층 증착(Atomic Layer Deposition:ALD)이었다. $265^{\circ}C$에서 Ta(OC2H5)5:Ar:NH3:Ar:NH3:Ar의 한 cycle에서 각 단계의 주입 시간을 1-60초:5초:5초:5초로 Ta(OC2H5)5 주입 시간을 변화시키면서 산화탄탈륨 막을 Cycle-CVD법으로 증착하였다. Ta(OC2H5)5주입시간이 증가하여도 cycle 당 두께가 $1.5\AA$/cycle로 일정하였다. $265^{\circ}C$에서 증착된 박막의 누설 전류는 2MV/cm에서 2x10-2A/$\textrm{cm}^2$이었고 열처리후의 산화탄탈륨 막의 누설 전류값은 $10-4A\textrm{cm}^2$ 이하고 감소하였다. 증착한 산화탄탈륨 막의 성분을 Auger 전자 분광법으로 분석하였다. 2$65^{\circ}C$에서 증착한 막의 성분은 탄탈륨 33at%, 산소 50at%, 탄소 5at%, 질소 12at% 이었으며 90$0^{\circ}C$, O2300torr에서 10분 동안 열처리한 박막은 탄탈륨 33at%, 산소 60wt%, 탄소 4at%, 질소 3at%이었다. 박막의 열처리 온도가 높을수록 불순물인 탄소와 질소의 박막 내 잔류량이 감소하였다. 열처리 후의 박막은 O/Ta 화학정량비가 증가하였으며 Ta의 4f7/5와 4f 5/2의 결합 강도가 열처리 전 박막보다 증가하였다. 열처리 후 누설 전류가 감소하는 것은 불순물 감소와 화학정량비 개선 및 Ta-O 결합 강도의증가에 의한 것으로 생각된다.

• Journal of Powder Materials
• /
• v.26 no.5
• /
• pp.410-414
• /
• 2019

The hydrogen reduction behavior of the $CuO-SCo_3O_4$ powder mixture for the synthesis of the homogeneous Cu-15at%Co composite powder has been investigated. The composite powder is prepared by ball milling the oxide powders, followed by a hydrogen reduction process. The reduction behavior of the ball-milled powder mixture is analyzed by X-ray diffraction (XRD) and temperature-programmed reduction at different heating rates in an Ar-10%H2 atmosphere. The scanning electron microscopy and XRD results reveal that the hydrogen-reduced powder mixture is composed of fine agglomerates of nanosized Cu and Co particles. The hydrogen reduction kinetics is studied by determining the degree of peak shift as a function of the heating rate. The activation energies for the reduction of the oxide powders estimated from the slopes of the Kissinger plots are 58.1 kJ/mol and 65.8 kJ/mol, depending on the reduction reaction: CuO to Cu and $SCo_3O_4$ to Co, respectively. The measured temperature and activation energy for the reduction of $SCo_3O_4$ are explained on the basis of the effect of pre-reduced Cu particles.

• Applied Biological Chemistry
• /
• v.30 no.1
• /
• pp.1-8
• /
• 1987

The distribution of the surface charges in two kinds of peats and their physico-chemical properties have a been studied by means of the potentiometric titration and by ion adsorption in different strength of electrolytes. The organic matter contents were 43.3% and 53.7% in Yeong Yang peat and Peong Tack peat, respectively. Their X-ray diffractograms showed that quartz was dominant in both peats, and illite, kaolinite, hydrated-halloysite and feldspars were contained in a trace. Total acidic group contents was 1.257me/g in Poeng Tack peat that was a little more than of Peong Yang heat were pKa values of Yeong Yang and Poeng Tack peat were 13.1 and 12.65, respectively. The titration curves at different ionic strength of electrolytes crossed at pH 3.9 and 4.4 in Yeong Yang peat, and pH 3.8 and 4.0 in Peong Tack peat. The pH ranges of suspensions when the net surfacecharge of the peats varied from positive to negative value were $pH\;4.55{\sim}5.20\;(NaCl)$ and $pH\;3.95{\sim}5.70\;(CaCl_2)$ in Yeong Fang peat, and $pH\;4.15{\sim}5.40\;(NaCl)$ and $pH\;3.80{\sim}4.15\;(CaCl_2)$ in Peong Tack peat. Therefore it is apparent that the zero point of charge of these peats was about pH 4.0.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.23 no.4
• /
• pp.299-306
• /
• 2003

This study was carried out to select superior soybean cultivars for forage production for soybean forage production in Jeju. The results obtained are summarized as follows; Eighteen soybean cultivars were grown from May 11 to September 11 in 2002 in Jeju to select superior cultivars for forage production. Days to flowering was shortest(58 days) for Seokryangkong and Keunolkong, and longest(93 days) for Danpaheukdu. Days to flowering for other cultivars ranged from 65 to 69 days. Pureunkong and Namhaekong had greater heights(129.3 and 124.6 cm, respectively) while Keunolkong, Hwaeomkong and Seokryangkong had shorter heights. The number of branches per plant was gratest for Sobaekkong, Manrikong, Pungsankong, Kwangankong and Geumgangkong. The number of leaves per plant was geatest for Sobaekkong, Iksankong and Namhaekong. Rueunkong and Jangmikong had thicker stems. Fresh forage yield was greatest for Iksankong, Sobaekkong and Namhaekong(39.5, 39.3 md 38.0 MT/ha respectively). DM yield of forage was featest for Baekunkong, Hnrunkong and Danpaheukdu. Danwonkong, Dawonkong, Seokryanfong and Pungsankong had ueatest forage crude protein content. Duyukong and Kwangankong had featest forage crude fiber content. Jangmikong and Keunolkong had feater crude fat content, while Sobaekkong and Kwangankong had greater crude ash content. Namhaekong, Seokryangkong, Keunolkong and Jinpumkong had greater NFE contents ranging 40.0 to 43.5 and TDN was featest in Keunolkong, Danpaheukdu, Namhaekong and Seokryangkong had greater NFE contents ranging from 59.8 to 60.9％. The best cultivars in Jeju for forage soybean appear to be Namhaekong, Danpaheukdu md Baehukong on the basis of crude protein, TDN, and dry matter yields.

• Economic and Environmental Geology
• /
• v.33 no.5
• /
• pp.391-404
• /
• 2000

This study investigated the geochemical characteristics of mine drainage discharged from an abandoned coal mine in the Hwasoon area. Surface water samples were collected from 23 locations along the Hancheon creek. The concentration of Zn and Cu in stream waters was highest at low pH (3.53), whereas the content of TDS and TDI was highest at high pH (7.78) due to the concentration of Ca, $HCO_3$ and $SO_4$. At the upstream site, the Ba, Fe, Mn, Zn, and $SO_4$ contents were relatively high but decreased significantly with the distance from the coal mine. On the contrary, the Na and $NO_3$ contents were low at the upstream site but increased downstream. Yellow precipitate material collected in the Hancheon consisted mainly of iron and LOI. This yellow precipitate was heated from 100 to $900^{\circ}C$ for 1 hour. With increasing temperature, the intensity of hematite peaks were sharply produced in X-ray pattern and the absorption band Fe-O of hematite increased in IR due to dehydration and melting. The yellow to brown precipitate and evaporite materials were collected by a air-dry from the acid mine water at the laboratory. After drying, the concentration of ions in the acid water samples increased progressively in oversaturation with respect to either gypsum, ferrohexahydrite or quenstedetite. The X-ray powder diffraction studies identified that the precipitated and evaporated materials after drying were well crystallized gypsum, ferrohexahydrite and quenstedetite. Diagnostic peaks used for identification of gypsum were the 7.65, 4.28, 3.03, 2.87 and 2.48$\AA$ peaks and those for ferrohexahydrite were the 5.46, 5.12, 4.89, 4.44, 4.05, 3.62, 3.46, 3.40, 3.20, 3.03, 2.94, 2.53, 2.28, 2.07, 1.88 and 1.86${\AA} peaks. The IR spectra with OH-stretching, deformation of $H_2O$and ${SO_4}^{2-}$stretching vibration include the existence of gypsum, ferrohexahydrite and quenstedetite in the precipitated and evaporite materials. In the SEM and EDS analysis for the evaporite material, gypsum with well-crystallized, acicular, and columnar form was distinctly observed.

• Journal of radiological science and technology
• /
• v.31 no.1
• /
• pp.25-31
• /
• 2008

Purpose : This study was conducted to understand for the diagnostic discordance of bone mineral density(BMD) in DEXA(Dual Energy X-ray Absorptiometry). And the diagnostic difference between lumbar spine and femur neck, forearm was evaluated using T-score. Materials and Methods : We studied 220 females measured BMD on lumbar spine, and femur neck, forearm including ward's triangle and ultra digital(UD). We were distinguished T-score into normal, osteopenia, osteoporosis(WHO classification) and evaluated discordance rate according to age and degree of bone loss. Correlation analysis and chi-square test between L-spine, L-4, femur neck, Ward, Forearm, UD were carried out. Results : In the lumbar spine, the number of normal were in 57(25.9%), osteopenia in 86(39.1%), osteoporosis in 77(35.0%). In the L-4 and ward's triangle, the number of osteoporosis were in 78(35.5%), in 126(57.3%). There was significant correlation between lumbar, femur neck and forearm BMD in all cases. The discordance of BMD between lumbar and femur were 57%, lumbar and forearm 43%, forearm and femur 51%. The discordance rates of normal, osteopenic, osteoporotic groups were 39%, 64%, 43%, respectively, showing the highest discordance rate in osteopenia patients. In normal group of lumbar spine, the discordance rate was 25%, 23%, 11%, 65%, 86% in 30', 40', 50', 60', 70', respectively. In osteopenia, osteoporosis group of lumbar spine, the discordance rate was 62%, 55%, 36%, 20%, 9% in 30', 40', 50', 60', 70', respectively. Conclusion : It was different of the results of BMD with lumbar, femur and forearm site. The discordance rate was decreased with age in osteopenia, osteoporosis lumbar spine. In osteopenia group, the discordance rate was the highest. So, it is necessary that the BMD of lumbar, femur neck and forearm should be checked.