• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.2
• /
• pp.60-66
• /
• 2014

A control oriented model of the Lean $NO_x$ trap (LNT) was developed to determine the timing of $NO_x$ regeneration. The LNT model consists of $NO_x$ storage and reduction model. Once $NO_x$ is stored ($NO_x$ storage model), at the right timing $NO_x$ should be released and then reduced ($NO_x$ reduction model) with reductants on the catalyst active sites, called regeneration. The $NO_x$ storage model simulates the degree of stored $NO_x$ in the LNT. It is structured by an instantaneous $NO_x$ storage efficiency and the $NO_x$ storage capacity model. The $NO_x$ storge capacity model was modeled to have a Gaussian distribution with a function of exhaust gas temperature. $NO_x$ release and reduction reactions for the $NO_x$ reduction model were modeled as Arrhenius equations. The parameter identification was optimally performed by the data of the bench flow reactor test results at space velocity 50,000/hr, 80,000/hr, and temperature of $250-500^{\circ}C$. The LNT model state, storage fraction indicates the degree of stored $NO_x$ in the LNT and thus, the timing of the regeneration can be determined based on it. For practical purpose, this model will be verified more completely by engine test data which simulate the NEDC transient mode.

• Korean Journal of Remote Sensing
• /
• v.25 no.3
• /
• pp.243-253
• /
• 2009

For the last 14 years, space-borne satellite SAR system such as RADARSAT-1, ERS-2, and ENVISAT ASAR have provided a continuous observation over the ocean. However, the data acquired from those systems were limited to C-band frequency until the advent of the first spacebome German X-band SAR system TerraSAR-X in 2007. Korea is also planning to launch the nation's first X-band SAR satellite (KOMPSAT-5) in 2010. It is timely and necessary to develop X-band models for estimating geophysical parameters from these X-band SAR systems. In this study, X-band wind retrieval model was investigated and developed based on numerical ocean scattering model (radar backscattering model and hydrodynamic interaction model). Although these models have not yet been tested and validated for broad ranges of wind conditions, the estimated wind speeds from TerraSAR-X data show generally good agreement with in-situ measurements.

• Bulletin of the Korean Mathematical Society
• /
• v.40 no.4
• /
• pp.677-683
• /
• 2003

In multi-allelic model $X\;=\;(x_1,\;x_2,\;\cdots\;,\;x_d),\;M_f(t)\;=\;f(p(t))\;-\;{\int_0}^t\;Lf(p(t))ds$ is a P-martingale for diffusion operator L under the certain conditions. In this note, we examine the stochastic differential equation for model X and find the properties using stochastic differential equation.

• Journal of the Korean Statistical Society
• /
• v.16 no.2
• /
• pp.71-79
• /
• 1987

The linear and quadratic log contrast model with mixtures on the strictly positive simplex, $$ x_{q-1} = {(x_1, \cdots, x_q):\sum x_, = 1 and \delta \leq \frac{x_i}{x_j} \leq \frac{1}{\delta} for all i,j},$$ are considered. Using the invariance arguments, symmetric D-optimal designs are investigated. The class of symmetric D-optimal designs for the linear log contrasts model is given. Any D-optimal design for the quadratic log contrast model is shown to metric D-optimal designs for q=3 and 4 cases are given.

• Journal of Communications and Networks
• /
• v.18 no.5
• /
• pp.857-869
• /
• 2016

This paper proposes an X-MAC/BEB protocol that runs a binary exponential backoff (BEB) algorithm on top of an X-MAC protocol to save more energy by reducing collision, especially in densely populated wireless sensor networks (WSNs). X-MAC, a lightweight asynchronous duty cycle medium access control (MAC) protocol, was introduced for spending less energy than its predecessor, B-MAC. One of X-MAC 's conspicuous technique is a mechanism to allow senders to promptly send their data when their receivers wake up. X-MAC, however, has no mechanism to deal with sudden traffic fluctuations that often occur whenever closely located nodes simultaneously diffuse their sense data. To precisely evaluate the impact of the BEB algorithm on X-MAC, this paper builds an analytical model of X-MAC/BEB that integrates the BEB model with the X-MAC model. The analytical and simulation results confirmed that X-MAC/BEB outperformed X-MAC in terms of throughput, delay, and energy consumption, especially in congested WSNs.

• Imaging Science in Dentistry
• /
• v.30 no.3
• /
• pp.183-188
• /
• 2000

Purpose: This study was to evaluate the beam quality of intraoral X-ray equipments used at Yonsei University Dental Hospital (YUDH) using the half value layer (HVL) and the characteristic curve of intraoral standard X-ray film. Materials and Methods : The study was done using the intraoral X -ray equipments used at each clinical department at YUDH. Aluminum filter was used to determine the HVL. Intraoral standard film was used to get the characteristic curve of each intraoral X-ray equipment. Results: Most of the HVLs of intraoral X-ray equipments were higher than the least recommended thickness, but the REX 601 model used at the operative dentistry department and the X-707 model used at the pediatric dentistry department had HVLs lower than the recommended thickness. The slopes of the characteristic curves of films taken using the PANP AS 601 model and REX 601 model at operative dentistry department, the X-70S model of prosthodontic dentistry department, and the REX 601 model at the student clinic were relatively low. Conclusion: HVL and the characteristic curve of X-ray film can be used to evaluate the beam quality of intraoral X-ray equipment. In order to get the best X-ray films with the least radiation exposure to patients and best diagnostic information in clinical dentistry, X -ray equipment should be managed in the planned and organized fashion.

• Journal of the Korean Statistical Society
• /
• v.35 no.4
• /
• pp.409-417
• /
• 2006

This article is concerned with threshold modeling of the bifurcating autoregressive model (BAR) originally suggested by Cowan and Staudte (1986) for tree structured data of cell lineage study where each individual $(X_t)$ gives rise to two off-spring $(X_{2t},\;X_{2t+1})$ in the next generation. The triplet $(X_t,\;X_{2t},\;X_{2t+1})$ refers to mother-daughter relationship. In this paper we propose a threshold model incorporating the difference of 'fertility' of the mother for the first and second off-springs, and thereby extending BAR to threshold-BAR (TBAR, for short). We derive a sufficient condition of stationarity for the suggested TBAR model. Also various inferential methods such as least squares (LS), maximum likelihood (ML) and quasi-likelihood (QL) methods are discussed and relevant limiting distributions are obtained.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.3
• /
• pp.139-145
• /
• 2017

The purpose of this study is to establish a predictive causal model of codependency that is a main issue of family problem on the base of Triple ABC-X model which is a kind of family stress model. For the purpose of this study, we reviewed the concept and characteristics of codependency, affecting factors of codependency, and then reviewed the basic concept and logic of Triple ABC-X Model as theoretical viewpoint for the purpose of establishing a predictive causal model of codependency. We established it through examining main variables of codependency from Triple ABC-X Model. Main ingredients of the predictive causal model include boundary ambiguity, internal working model, internal and external locus of control, self-regard, social support, individual maladjustment etc. We established a predictive model of codependency basing on logic inferences among the variables. This study is expected to be used basic data to introduce some implications and for hereafter research.

• Transactions on Control, Automation and Systems Engineering
• /
• v.1 no.1
• /
• pp.69-74
• /
• 1999

Adaptive algorithms based on gradient adaptation have been extensively investigated and successfully joined with active noise/vibration control applications. The Filtered-X LMS algorithm became one of the basic feedforward algorithms in such applications, but is not fully understood yet. Effects of cancellation path model on the Filtered-X LMS algorithm have investigated and some useful properties related to stability were discovered. Most of the results stated that the error in the cancellation path model is undesirable to the Filtered X LMS. However, we started convergence analysis of Filtered-X LMS based on the assumption that erroneous model does not always degrade its performance. In this paper, we present a way of optimizing the cancellation path modern in order to enhance the convergence speed by introducing intentional phase error. Carefully designed intentional phase error enhances the convergence speed of the Filtered X LMS algorithm for pure tone noise suppression application without any performance loss at steady state.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.8
• /
• pp.647-653
• /
• 2011

In this study, a method to measure the thickness of thin film by EDS (energy dispersive spectroscopy) is suggested. We have developed a model which calculates the thickness of thin film from the characteristic x-ray intensity ratio of the elements in thin film and substrate by considering incident electron beam energy, x-ray generation curve, backscattering and absorption of x-ray, take-off angle of x-ray and tilt angle of the sample. We obtained the relation curve between the film thickness measured experimentally and the x-ray intensity ratio of elements. The film thicknesses calculated from the model agrees quite well with those measured experimentally. Therefore, the thin film thickness can be measured rapidly and accurately by using the model developed in this study and the x-ray intensity ratio obtained in EDS analysis.