• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2002.09a
• /
• pp.53-60
• /
• 2002

Motion of lung tumors from respiration has been reported in the literature to be as large as of 1-2 cm. This motion requires an additional margin between the Clinical Target Volume (CTV) and the Planning Target Volume (PTV). While such a margin is necessary, it may not be sufficient to ensure proper delivery of Intensity Modulated Radiotherapy (IMRT) to the CTV during the simultaneous movement of the DMLC. Gated treatment has been proposed to improve normal tissues sparing as well as to ensure accurate dose coverage of the tumor volume. The following questions have not been addressed in the literature: a) what is the dose error to a target volume without gated IMRT treatment\ulcorner b) what is an acceptable gating window for such treatment. In this study, we address these questions by proposing a novel technique for calculating the 3D dose error that would result if a lung IMRT plan were delivered without gating. The method is also generalized for gated treatment with an arbitrary triggering window. IMRT plans for three patients with lung tumor were studied. The treatment plans were generated with HELIOS for delivery with 6 MV on a CL2100 Varian linear accelerator with a 26 pair MLC. A CTV to PTV margin of 1 cm was used. An IMRT planning system searches for an optimized fluence map ${\Phi}$ (x,y) for each port, which is then converted into a dynamic MLC file (DMLC). The DMLC file contains information about MLC subfield shapes and the fractional Monitor Units (MUs) to be delivered for each subfield. With a lung tumor, a CTV that executes a quasi periodic motion z(t) does not receive ${\Phi}$ (x,y), but rather an Effective Incident Fluence EIF(x,y). We numerically evaluate the EIF(x,y) from a given DMLC file by a coordinate transformation to the Target's Eye View (TEV). In the TEV coordinate system, the CTV itself is stationary, and the MLC is seen to execute a motion -z(t) that is superimposed on the DMLC motion. The resulting EIF(x,y)is inputted back into the dose calculation engine to estimate the 3D dose to a moving CTV. In this study, we model respiratory motion as a sinusoidal function with an amplitude of 10 mm in the superior-inferior direction, a period of 5 seconds, and an initial phase of zero.

• IE interfaces
• /
• v.7 no.1
• /
• pp.67-74
• /
• 1994

In this study, we propose an integrated CAD(Computer Aided Design) library database in a heterogeneous commercial ECAD(Electronic CAD) environment. To effectively solve engineering problems focused on BOM data extraction we use a software system called schematic capture and company-wide standard electronic part information loaded on different commercial ECADs. We unify many commercial ECADs into one schematic capture and a variety of PCB(Printed Circuit Board) design tools. For this purpose we develope a model for linking CAD symbol library with company-wide standard part information. We also develope a schematic design data conversion scheme and show how to extract PBA level BOM data using our customized schematic capture. This system is being operated in an X-Window based engineering work station and commercial RDBMS base.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.4
• /
• pp.944-954
• /
• 1997

This study addreses the design and implrmentation of korean SGML(Standard Generalized Markup Langu-age)editor capable of ggenerating DTD(Document Type Definition)s,which can be used at the same time to gen-erate HTML documents as well] as SGML documents using interactive method.HTML is an appkication of SGML and HTML DTD is defined according to the syntax of SGML.Therefore it is possible to generate HTML documents of any versions by replacing the corresponding DTDs and using the implemented editor.This system has been implemented using GUI such as Motif and UIL(User Interface Language)in X-window system and C-language for common modules of functions.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.12
• /
• pp.1412-1422
• /
• 1992

This paper describes an implementation of the document class editor based on ODA(Open Document Architecture). For processing, we divided document structure into generic logical structure and generic layout structure as ODA standard. Also this editor could edit document profile. Using the utility which was implemented to investigate the composed document by object. we confirmed the document. And we could verify the ODIF stream data of the document. We designed this editor based on DAP level 2 of international functional standard. This system was implemented in environment of the X window system and the Motif as graphical user interface. This document class editor will be used to create real document having specific document structure.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.15 no.1
• /
• pp.42-47
• /
• 2005

In this papcr, we address the 3D reconstruction of the indoor circumstance using what the data is extracted by a pall of image from Stereo Camera. Generally sucaking, there arc three methods to extract 3-Dimensional data using IR sensor, Laser sensor and Stereo camera sensor. The best is stereo camera sensor which can show a high performance at a reasonable price. We used 'Window Correlation Matching Method' to extract 3-Dimensional data in stereo image. We proposed new Method to reduce error data, said 'Histogram Weighted Hough Transform'. Owing to this mettled, we reduced error data in each stereo image. So reconstruction is well done. 3-Dimensional Reconstruction is accomplished by using the DirectX that is well known as 3D-Game development tool. We show that the stereo camera can be not only used to extract 3-dimensional data but also applied to reconstruct the 3-Dimensional circumstance. And we try to reduce the error data using various method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.10
• /
• pp.2317-2328
• /
• 1997

The objective of this paper is to develop an algorithm for a real-time automatic fingerprint recognition system. The algorithm employs the wavelet transform(WT) and the dominat local orientation that derived from the gradient Gaussian(GoG) and coherence in determining the directions of ridges in fingerprint images. By using the WT, the algorithm does not require conventional preprocessing procedures such as smothing, binarization, thining and restoration. For recognition, two fingerprint images are compared in three different ST domains;one that represents the original image compressed to quarter(LL), another that shows vertical directional characteristic(LH), and third as the block that contains horizontal direction(HL) in WT domain. Each block has dominat local orientation that derived from the GoG and coherence. The proposed algorithm is imprlemented on a SunSparc-2 workstation under X-window environment. Our simulation results, in real-time have shown that while the rate of Type II error-Incorrect recognition of two identical fingerprints as the identical fingerprints-is held at 0%, the rate of Type I error-Incorrect recognitionof two identical fingerprints as the different ones-is 2.5%.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.19 no.4
• /
• pp.3-19
• /
• 2009

This paper proposes efficient scalar multiplication algorithms based on Montgomery ladder method. The proposed algorithm represents the scalar as ternary or quaternary and applies new composite formulas utilizing only x coordinate on affine coordinate system in order to improve performance. Furthermore, side-channel atomicity mechanism is applied on the proposed composite formulas to prevent simple power analysis. The proposed methods saves at least 26% of running time with the reduced number of storage compared with existing algorithms such as window-based methods and comb-based methods.

• Korean Journal of Computational Design and Engineering
• /
• v.9 no.2
• /
• pp.102-111
• /
• 2004

In this paper, the efficient layout method for generating common and continuous cutting path of flat-bar profile. The ‘flat -bar’ is a stiffener and has long rectangular shape. This paper describes a fast nesting algorithm of the flat-bar, and a procedure to generate cutting path of gas/plasma torch, which is operated by a NC (numerically controlled) gas/plasma cutting machine. By using this common and continuous path, the machining-time for cutting and the maintenance-cost of plasma-torch could be reduced. Proposed procedures are written in C-language and applied to the Interactive Flat-Bar-Nesting System executable on Open VMS with X-Window system.

• Korean Journal of Remote Sensing
• /
• v.10 no.2
• /
• pp.121-132
• /
• 1994

A GIS based tactical terrain analysis system named ATTAS(Army Tactical Terrain Analysis Software) has been designed and implemented to support the field commanders for enhancing the capabiliy of their unit and efficiency of weapon system. This system is designed to provide computer graphics environment in which the analyst can interactively operate the entire analyzing process such as selecting the area of interest, performing analysis functions, simulating required battlefield operation and display the results. This system can be divided into three major sections; the terrain analysis modules, utilites, and graphic editor. The terrain analysis module inclused surface analysis, line of sight analysis, enemy disposition, 3D display, radar coverage, logistic route analysis, shortest path analysis, atmospheric phenomena prediction, automated IPB (Inteligence preparation of Battlefield), and other applied analysis. A combination of 2D and 3D computer graphics techniques using the X-window system with OSF/Motif in UNIX workstation was adopted as the user interface. The integration technique of remotely sensed images and GIS data such as precision registration, overlay, and on-line editing was developed and implemented. An efficient image and GIS data management technique was also developed and implemented using Oracle Database Management System.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2002.09a
• /
• pp.294-297
• /
• 2002

For the quality control procedure of diagnostic x ray units, a method for simultaneous measurement of air kerma, half value layer and tube potential was developed utilizing a computed radiography system for intraoral radiography and film badge case. The response of average pixel values under the windows were calibrated by x rays generated at tube potentials from 40 to 140 kV with filtration from 1.5 to 3.7 mmAl. The calibration curves for half value layer and tube potential were derived as functions of attenuation factors by the 1.4 mmAl filter and the 0.2 mmCu filter. The energy dependency of the open window response was corrected by the calibration factor as a function of the attenuation factor by the 1.4 mmAl filter. The uncertainty of the estimated half value layer, tube potential and air kerma were 0.2 mmAl, 3.6 % and 5 %, respectively. It was thus suggested that this system could be applied to quality control program to detect the variation of working condition of x ray units in clinical use.