• Korean Journal of Crystallography
• /
• v.11 no.1
• /
• pp.16-21
• /
• 2000

(Yb/sub x/Y/sub 1-x/)Ca₄O(BO₃)₃ single crystals where x=0.3,8,15,20% were grown by Czochralski Method. The crystals grown under the optimum conditions were transparent and colorless with good crystal form. Using polarizing microscope, crystal defects such as parasite crystals and bubbles were detected depending on the composition of melts and pulling rates. The optimum growth parameters for high quality of single crystals were 15∼20 rpm of rotation rate and 2mm/h of pulling rate at the flow rate of 2 l/min of Nitrogen gas. The relationship between crystal axes and optical axes was investigated by optical crystallographic method, polarization technique and single crystal X-ray method. From the spectroscopic measurements, it was confirmed that there were strong absorption bands at 900 and 976.4 nm and strong emission band at 976.4 nm in Yb/sup 3+/ ion doped YCa₄O(BO₃)₃ crystal. For the application of second harmonic generation of 1.064 ㎛ laser, non-linear optical devices with θ=32.32° and Ψ=0°, λ/10 of flatness and the size of 6x8x5.73 mm were fabricated from the grown YCa₄O(BO₃)₃ crystal.

• Proceedings of the Optical Society of Korea Conference
• /
• 1995.06a
• /
• pp.185-189
• /
• 1995

A high-power Nb:glass laser system(Simmyung I) has been contructed and tested. In this system, we used a Nb:YLF laser as a master oscillator, a 4-pass amplifier for pre-amplification, 5 stages of rod amplifiers, and spatial filtering and image reaying usits. The system has demonstrated in excess of 80J(2TW) with 40 psec(FWHM) pulse duration. Output energy, gain and spatial were measured at each amplification stage. With this laser system a preliminary X-ray generation experiment was performed. Pinhole images, X-ray diode signals and X-ray speriment were obtained for the irradiated target of copper. Detailed descriptions of the system performance and the X-tay generation experiment are presented.

• Journal of the Optical Society of Korea
• /
• v.14 no.4
• /
• pp.333-336
• /
• 2010

The generation of coherent x-ray beams by using a multi-slit diffraction phenomenon is presented. The mode-confinement conditions in the x-ray waveguide (XWG) needed to obtain single-mode beams are determined. The XWGs are stacked to form an XWG array. The core of the XWG array is used as a slit in an opaque screen, similar to those used for visible light. Diffraction patterns that interfered constructively in the XWG array are investigated based on multi-slit diffraction theory. The irradiance distributions are studied at on observation screen. The FWHM of diffracted x-ray spectra were between $1.67{\times}10^{-4}$ to $3.30{\times}10^{-5}$ radians which lead to a spot-size of a few tens of micrometers on the screen at distance of 1 m. The intensities decrease with increase in the period of the XWG array, i.e. a thicker cladding, due to growth of the higher-order diffraction peaks.

• Journal of the Korean Society of Costume
• /
• v.48
• /
• pp.37-52
• /
• 1999

The purpose of this study was to find out the clothing-consumption propensity(CCP) and to classify consumption types in CCP and to classify consumption types in CCP and to compare the classfied groups on their consumer characteristics among Korean female X-generation. The survey method was conducted for this study. The subjects are 477 Koran femal X-generation whose age ranges from 18 to 29 and who reside in Seoul and its adjoined areas. The span of the survey was February through March in 1998. the results were analyzed by using of SPSS/PC+package. 1. The clothing consumption motives among the female X-generation were the sensuous satisfaction for posession motive the were practical necessity of the purcahse successively in order. The clothing consumption attitude were the practical electicism the effective value the favorable attitude on low price goods toward sale items and the self-control over their consumption. 2. According to the CCP consumers were classified into five groups: electice and practical group ostentatious and extravagant group passive and economical group sensuous and practical group and sale-fond group. The respective group showed significant difference in the nine factors of the CCP. 3. Consumtion type group had significantly difference in lifestyle among consumer factor and materialistic propensity influence of economic recession follow consumption among social influence factors.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.8
• /
• pp.187-196
• /
• 2021

This study uses data from the 11th year(2016) to the 15th year(2020) of the Korea Welfare Panel(KOWEPS) for the five years that the survey was completed to predict the life satisfaction of each individual by generation, centered on single-person households. This is a longitudinal analysis using a latent growth model. The generational division was based on the turning point of a major event experienced by the cohort that brought about a decisive change in the socialization process, historical event, and technological development as factors. The analysis data used in this study were of 27,447 persons in the 15th year of the Korea Welfare Panel(2020), 2,778 persons who were single-person households even in the first year from the last 5 years, and 1,448 persons who were single-person households continuously for 5 years. Excluding those born in 1922 to 1944(843 persons), 605 persons born between 1945 and 1996 were included. As a result of the study, Generation Y(millennials) than Generation X(new generation) and Generation X generation than Baby Boomers showed higher overall life satisfaction. Since overall life satisfaction by generation does not have an effect on the rate of change, it was found that this difference remains the same for all generations.

• Korean Journal of Metals and Materials
• /
• v.50 no.2
• /
• pp.183-190
• /
• 2012

Hydrogen was generated by the reaction of metal hydride with water. The variation of hydrogen generation with the kind of powders (milled $MgH_2$, and $MgH_2$ milled with various contents of MgO, $MgCl_2$ or $Ni+Nb_2O_5$) was investigated. $MgH_2$ powder with a hydrogen content of 6.05 wt% from Aldrich Company was used. Hydrogen is generated by the reaction of Mg as well as $MgH_2$ with water, resulting in the formation of byproduct $Mg(OH)_2$. For about 5 min of reaction time, milled $95%MgH_2+5%MgO$ has the highest hydrogen generation rate among milled $MgH_2+x%MgO$ (x=0, 5, 10, 15 and 20) samples. Milled $90%MgH_2+10%MgCl_2$ has the highest hydrogen generation rate among all the samples.

• Journal of the Korean institute of surface engineering
• /
• v.47 no.4
• /
• pp.210-214
• /
• 2014

We investigated emission characteristics of tandem organic light emitting devices (OLEDs) with p-type materials as charge generation layer. The tandem OLEDs were fabricated by using $MoO_x$, $WO_x$, C60 and HATCN as p-type material or not using p-type material for charge generation. When HATCN was used as p-type material, it showed high current density at low applied voltage, but increase of efficiency was small because of charge unbalance in emitting layer. In case of tandem OLED not using p-type material, applied voltage increased remarkably because of difficulty of hole injection. In case of $MoO_x$, $WO_x$ or C60 as p-type material, current emission efficiency increased greatly. In particular, current emission efficiency of tandem OLED using $MoO_x$ as p-type material increased up to 3 times than current emission efficiency of single OLED. The Commission Internationale de l'Eclairage (CIE) 1931 color coordinates were changed by overlapping of 504 nm emission wavelength. As a result, emission efficiency of tandem OLED improved compared with single OLED, but driving voltage also increased by increase of organic layer thickness.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.1
• /
• pp.20-28
• /
• 2016

This paper presents a generation rescheduling method for the enhancement of transient stability in power systems. The priority and the candidate generators for rescheduling are calculated by using the energy margin sensitivity. The generation rescheduling formulates the Lagrangian function with the fuel cost and emission such as NO_x and SO_x from power plants. The generation rescheduling searches for the solution that minimizes the Lagrangian function by using the Newton’s approach. While the Pareto optimum in the fuel cost and emission minimization has a drawback of finding a number of non-dominated solutions, the proposed approach can explore the non-inferior solutions of the multiobjective optimization problem more efficiently. The method proposed is applied to a 4-machine 6-bus system to demonstrate its effectiveness.

• Journal of Environmental Science International
• /
• v.25 no.10
• /
• pp.1369-1379
• /
• 2016

This research assessed the disparity in anion generation according to the vertical structure of a Zelkova Serrata tree for the purpose of creating a pleasant and green city environment. Measurements for the study were conducted between July and August of 2014 in Chung-ju in the central region of the Republic of Korea. The average anion generation of vertical structure trees during active photosynthesis periods was: L Section ($839.0ea/cm^3$) > M Section ($664.6ea/cm^3$) > U Section ($472.0ea/cm^3$). According to DMRT analysis, significant difference was found in the average between the L, or M Locations and the U Locations. During dormant photosynthesis periods, records showed that the anion production at the M Location ($1,212.5ea/cm^3$) > L Location ($1,050.4ea/cm^3$) > H Location ($844.1ea/cm^3$), According to DMRT analysis, the difference within each location was significant for ${\alpha}=0.05$. In a comprehensive analysis of the weather factors in each vertical structure, anion generation during active photosynthesis periods showed a positive correlation with solar radiation and a negative correlation with wind speed. Dormant photosynthesis periods showed negative correlations with both solar radiation and temperature, and positive correlations with relative humidity and wind speed. Predictions from a multicenter retrospective study showed that during active photosynthesis periods, $Y_1=282.443X_1+512.07$, and $Y_2=314.337X_1+16.913X_2$, while during dormant photosynthesis periods, $Y_1=391.009X_1+840.043$, and $Y_2=351.412X_1+32.765X_2$.

• Journal of the Korean Society of Safety
• /
• v.32 no.6
• /
• pp.29-33
• /
• 2017

In order to solve this sort of electrostatic failure in Display and Semiconductor process, Soft X-ray ionizer is mainly used. Soft X-ray Ionizer does not only generate electrical noise and minute particle but also is efficient to remove electrostatic as it has a wide range of ionization. There exist variable factors such as type of tungsten thickness deposited on target, Anode voltage etc., and it takes a lot of time and financial resource to find optimal performance by manufacturing with actual X-ray tube source. Here, MCNPX (Monte Carlo N-Particle Extended) is used for simulation to solve this kind of problem, and optimum efficiency of X-ray generation is anticipated. In this study, X-ray generation efficiency was compared according to target material thickness using MCNPX and actual X-ray tube source under the conditions that tube voltage is 5 keV, 10 keV, 15 keV and the target Material is Tungsten(W). At the result, In Tube voltage 5 keV and distance 100 mm, optimal target thickness is $0.05{\mu}m$ and fastest decay time appears + decay time 0.28 sec. - deacy time 0.30 sec. In Tube voltage 10keV and distance 100 mm, optimal target Thickness is $0.16{\mu}m$ and fastest decay time appears + decay time 0.13 sec. - deacy time 0.12 sec. In the tube voltage 15 keV and distance 100 mm, optimal target Thickness is $0.28{\mu}m$ and fastest decay time appears + decay time 0.04 sec. - deacy time 0.05 sec.