• 한국정밀공학회지
• /
• 제30권8호
• /
• pp.785-789
• /
• 2013

Worm gear sets may be either single- or double-enveloping. In a single-enveloping set, the worm wheel is cut into a concave surface, thus partially enclosing the worm when meshed. The double-enveloping worm gear is similar to the single-enveloping gear; however, the worm envelopes the worm gear. Thus both are throated. The double-enveloping worm gear has more of the tooth surface in contact than the single-enveloping worm gear. The larger contact area increases the load-carrying capacity. For this reason, double-enveloping worm gearing is widely applied in heavy-duty machinery, for applications including construction and metallurgy. In this paper, we designed a compact reduction gear that is highly efficient using double-enveloping worm gears. We calculated the bearing load in the worm gearing to select the bearing and the housing surface area according to the recommended values from AGMA(American Gear Manufacturers Association). The finite element method was used to assess the structural integrity.

• Journal of Mechanical Science and Technology
• /
• 제14권4호
• /
• pp.408-417
• /
• 2000

The design and simulation of meshing of a single enveloping worm-gear drive with modified surfaces is presented. Generally worm-gear is generated by the hob which is identical to the worm. This process guarantees the conjugation between the worm and the gear but results in a line contact at every instant which is very sensitive to misalignment. The localization of bearing contact is necessary to reduce the sensitivity of the worm-gear drive to misalignment. Practically this localization is achieved by application of an oversized worm type hob to cut the worm-gear. The oversized hob approach is very practical and effective to localize bearing contact but can not provide the conjugation between the worm and the modified worm-gear. This work proposes an analytical procedure to make the worm surface conjugate to the worm-gear which is cut by the oversized hob. The developed computer program allows the investigation of the influence of misalignment on the shift of the bearing contact and the determination of the transmission errors, the contact ratio and the principle curvatures. The developed approach has been applied for ZK type of single-enveloping worm-gear drives and the developed theory is illustrated with a numerical example.

• Tribology and Lubricants
• /
• 제34권6호
• /
• pp.325-331
• /
• 2018

Automobiles and systems requiring high gear ratios and high power densities generally use worm gears. In particular, as worm gears have a small volume and self-locking function, home appliances such as refrigerators and washers consist of worm gears. We can classify worm gears into cylindrical worms and rectangular worms. According to the AGMA standard, there are four types of cylindrical worms, ZA, ZN, ZK and ZI, depending on the machining of the worm shaft. It is preferable to use a ZI-type worm shaft, which is a combination of a worm wheel having an involute helical tooth surface and a conjugate tooth surface. However, in many cases, industries mostly use ZK, ZN, and ZA worm shafts because of the ease of processing. This paper presents numerical approaches to produce ZI and ZA worm surfaces and worm wheel. For the analysis of the transmission error of a worm gear system, this study (1) generates surface profile functions of ZI profile worm gear and worm shaft based on the common rack theory, (2) adopts the Newton-Raphson method for the analysis of the gear surface contact condition, and (3) presents and compares the corresponding transmission errors of ZI and ZA worm gears.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.521-522
• /
• 2013

• 동력기계공학회지
• /
• 제11권4호
• /
• pp.65-71
• /
• 2007

According to the survey, abnormal condition of the system is the main source for interrupting an elevator service, especially faults in worm gears used for the traction machine. Worm gear is popularly used in traction machine for middle and low speed elevators. Elevators need high reliability and stability, because they are closely related to human life. Usually, traction machine is applied to drive the elevators that have height about 35 m and it is an important mechanical unit for riding quality in elevators. There are some research results about types of vibration fault for worm gear in International Association Elevator Engineers (IAEE). But this study concerns with diagnosis of various faults in elevator worm gear using vibration signal. The analysis of fault characteristics is compared with previous researches in traction machine.

• 한국자동차공학회논문집
• /
• 제22권1호
• /
• pp.77-84
• /
• 2014

The worm gear is used in the motor drive system of automotive CVVL because of its compactness and self-locking ability. A ZK worm and an involute helical gear can be meshed in order to reduce production cost. However, the gearing is not suitable for the reliability and the NVH problem. To improve the dynamic performances, an optimal design process is considered. The transmission error is calculated theoretically and minimized with the several gear design parameters. An inequality condition such as the teeth interference elimination is added.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.731-732
• /
• 2009

• 동력기계공학회지
• /
• 제20권1호
• /
• pp.57-62
• /
• 2016

In this study, design the core part of the driving of the robot. The power of the driving is window motor for automobiles obtained by using a method of directly to the motor shaft of the worm gear type. The decelerator consists of a worm gear to receive power from the motor shaft, Helical gear contact to worm gear, a pinion gear to be connected in line with the helical gear, and an output shaft to be engaged to the pinion gear. Drive system by using the power from the motor shaft based on the deceleration gear designed by the gear ratio set by the gear teeth increases the torque.

• 한국융합학회논문지
• /
• 제2권2호
• /
• pp.27-34
• /
• 2011

본 연구는 호빙 가공공정 없이 워엄 휠 기어 형상을 만들기 위한 워엄 휠의 개발을 위한 제품을 만드는 것이다. 호빙 가공 공정이 없기 때문에, 증가된 생산성과 등가의 품질을 가지는 플라스틱 워엄 휠이 결국 만들어지게 된다. 그 결과, 이 제품은 현대 모비스, 만도, TRW, KOYO/NSK/Showa(Japan), Delphai(Amercia)에 판매 될 것이다. 핵심 기술 및 전략은 다음과 같다. 워엄 휠의 성형을 위한 기술 보호는 최근 "헬리컬 기어(No. 10-2008-0105908) 성형"이 특허 공정으로 되어 있다. 나아가, "보스 삽입을 위한 위치 결정을 위한 성형 시스템"을 위한 특허 절차가 준비 중이다. 기어 기계가공 절차 없이 호빙 머신에 기어 성형 절차로서, 무엇보다 먼저, 기어를 만드는 코어 개발 기술이 주된 주제이다. 따라서, 코어 및 성형 기초가 초기 순서로 개발되지 않아서, 현재 개발되는 워엄 휠의 경우, 기어는 이차적으로 호빙 M/C로 기계가공 된다. 최종적으로는, 성형 기초 구조체를 위한 특허가 본 연구결과로 만들어질 예정이다.

• 한국기계가공학회지
• /
• 제13권5호
• /
• pp.107-115
• /
• 2014

Highly functional mill turrets have been developed and continuously improved to shorten the manufacturing time and enable multiple uses. Among these, a mill turret with B-axis rotary table was developed. The B-axis rotary table should be evaluated for structural integrity. Moreover, its worm and worm gear for transmitting power should be able to endure fatigue damage. Therefore, this article presents a structural analysis of this type of B-axis rotary table and confirms its static stability by comparing the stress results to the allowable stress levels. Next, the dynamic stability of the rotary table was investigated via a mode analysis and a harmonic analysis in a range determined by the results of a modal analysis. Finally, a worm gear set, the main part that drives the rotary table, is analyzed for fatigue and to estimate its lifetime. The results of the fatigue analysis allowed a prediction of the life of the worm gear set. The analytical results show that the B-axis rotary table has good structural integrity.