Browse > Article
http://dx.doi.org/10.9725/kts.2018.34.6.325

Transmission Error Analysis of ZI and ZA Profile Worm Gears  

Lee, Tae-Hoon (Graduate School, School of Mechanical Engineering, Pusan National University)
Suh, Junho (School of Mechanical Engineering, Pusan National University)
Park, Noh-Gill (School of Mechanical Engineering, Pusan National University)
Publication Information
Tribology and Lubricants / v.34, no.6, 2018 , pp. 325-331 More about this Journal
Abstract
Automobiles and systems requiring high gear ratios and high power densities generally use worm gears. In particular, as worm gears have a small volume and self-locking function, home appliances such as refrigerators and washers consist of worm gears. We can classify worm gears into cylindrical worms and rectangular worms. According to the AGMA standard, there are four types of cylindrical worms, ZA, ZN, ZK and ZI, depending on the machining of the worm shaft. It is preferable to use a ZI-type worm shaft, which is a combination of a worm wheel having an involute helical tooth surface and a conjugate tooth surface. However, in many cases, industries mostly use ZK, ZN, and ZA worm shafts because of the ease of processing. This paper presents numerical approaches to produce ZI and ZA worm surfaces and worm wheel. For the analysis of the transmission error of a worm gear system, this study (1) generates surface profile functions of ZI profile worm gear and worm shaft based on the common rack theory, (2) adopts the Newton-Raphson method for the analysis of the gear surface contact condition, and (3) presents and compares the corresponding transmission errors of ZI and ZA worm gears.
Keywords
worm gear system; ZI worm; ZA worm; gear transmission error;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 AGMA, 6022-C93, "Design Manual for Cylindrical Wormgearing", pp. 5-8, 1993.
2 Litvin, F. L., "Gear Geometry and Applied Theory, 2nd edition", Cambridge, 2004.
3 Crosher, W. P., "Design and Application of the Worm gear", ASME Press, New York, pp. 38-61, 2002.
4 Harris, S. L., "Dynamic loads on the teeth of spur gears", Proceedings of the Institution of Mechanical Engineers, Vol. 172, pp. 87-100, 1958.   DOI
5 Litvin, F. L., Alfonso, Fuentes, "Gear Geometry and Applied Theory", Cambridge, 2004.
6 Litvin, F. L., "Generalized concept of meshing and contact of involute crossed helical gears and its application", Computer Methods in Applied Mechanics and Engineering, Vol. 194, No. 34, pp. 3710-3745, 2005.   DOI
7 Lee, S. C., "Tooth profile design of an oval gear according to the curvature of the pitch curve", J. Korean Soc. Tribol. Lubr. Eng., Vol. 28, No. 1, pp. 27-32, 2012.   DOI
8 Cheon, G. J., "Optimal design of a gear pump for yarning", J. Korean Soc. Tribol. Lubr. Eng., Vol. 18, No. 4, pp. 279-284, 2002.
9 Choi, J. H., Ahn S. C., Park S. S., "Tooth profile analysis for face gear with 1:2 gear ratio in handpiece with $160^{\circ}$ contra angle", J. Korean Soc. Tribol. Lubr. Eng., Vol. 30, No. 2, pp. 86-91, 2014.   DOI
10 Tak, S. H., Hwang, G. S., Son, Y. S., Bae, H. J., Lyu, S. K., "A study on the transmission error of the gear on contact load", J. Korean Soc. Tribol. Lubr. Eng., Vol. 23, No. 3, pp. 117-122, 2007.
11 Kim, T. W., Hwang, J. Y., Cho, Y. J., "A study of spur gear tooth profile modification scheme for scuffing resistance improvement", J. Korean Soc. Tribol. Lubr. Eng., Vol. 18, No. 6, pp. 418-424, 2002.