• International Journal of Precision Engineering and Manufacturing
• /
• 제6권1호
• /
• pp.51-58
• /
• 2005

The development of the high-efficiency machine-tools equipment and new cutting tool materials with high hardness, heat- and wear-resistance has opened the way to application of high-speed cutting process. The basic argument of using of high-speed cutting processes is the reduction of time and the respective increase of machining productivity. In this sense, the spindle units may be regarded as one of the most important units, directly affecting many parameters of high-speed machining efficiency. One of the possible types of spindle units for high-speed cutting is the air-bearing type. In this paper, we propose the mathematical model of the dynamic behavior of the air-bearing spindle. To provide the high-level of speed capacity and spindle rotation accuracy we need the adequate model of "spindle-bearings" system. This model should consider characteristics of the interactions between system components and environment. To find the working characteristics of spindle unit we should derive the equations of spindle axis movement under the affecting factors, and solve these equations together with equations which describe the behavior of lubricant layer in bearing (bearing stiffness equations). In this paper, the three influence coefficients are introduced, which describe the center of spindle mass displacement, angle of shaft rotation around the axes under the unit force application and that under the unit torque application. These coefficients are operated in the system of differential equations, which describes the spindle axis spatial movement. This system is solved by Runge-Kutta method. Obtained trajectories and amplitude-frequency characteristics were then compared to experimental ones. The analysis shows good agreement between theoretical and experimental results, which confirms that the proposed model of air-bearing spindle is correctis correct

• Smart Structures and Systems
• /
• 제20권2호
• /
• pp.151-162
• /
• 2017

In practical engineering, the friction damper is a widely used energy dissipation device because of its large deformation capacity, stable energy dissipation capability, and cost effectiveness. While based on conventional friction dampers, the double-sliding friction damper (DSFD) being proposed is different in that it features two sliding friction forces, i.e., small and large sliding friction forces, rather than a single-sliding friction force of ordinary friction dampers. The DSFD starts to deform when the force sustained exceeds the small-sliding friction force, and stops deforming when the deformation reaches a certain value. If the force sustained exceeds the large sliding friction force, it continues to deform. Such a double-sliding behavior is expected to endow structures equipped with the DSFD better performance in both small and large earthquakes. The configuration and working mechanism of the DSFD is described and analyzed. Quasi-static loading tests and finite element analyses were conducted to investigate its hysteretic behavior. Finally, time history analysis of the single-degree-of-freedom (SDOF) and multi-degree-of-freedom (MDOF) systems were performed to investigate the seismic performance of DSFD-equipped structures. For the purpose of comparison, tests on systems equipped with conventional friction dampers were also performed. The proposed DSFD can be realized perfectly, and the DSFD-equipped structures provide better performances than those equipped with conventional friction dampers in terms of interstory drift and floor acceleration. In particular, for the MDOF system, the DSFD helps the structural system to have a uniform distributed interstory drift.

• 대한영양사협회학술지
• /
• 제17권2호
• /
• pp.142-160
• /
• 2011

The purpose of this study was to investigate food sanitation status in elderly welfare facilities and assess the performance of food sanitation practices. Twenty elderly welfare facilities out of 85 located in Seoul with a capacity of fewer than 50 persons participated. The food sanitation status of worktable, kitchen utensils (knives, cutting boards, ladles, spoons), and tableware and bowls were examined by ATP bioluminescence. The results found that the ATP value of knife was the highest. Those of ladles appeared relatively higher than others. Meanwhile, the tableware and bowls, although washed everyday after meals, had the lowest ATP value. This study also conducted a survey on the food sanitation practices of 32 cooking employees in the 20 facilities. Fifty-six percent were in their 40s, and 53% had graduated from high school. More than half (66%) of them had no certification of cooking. Half of the respondents had worked for at least 5 years in food service facilities, and had received food sanitation training. Among them, 31% said they applied food sanitation training while working, and 47% responded the training was very helpful. The foodservice employees demonstrated good food sanitation practices. The results show that food sanitation performance of the workers significantly differed according to their age, education level, total work experience in food service facilities, chef certification, and prior food sanitation experience.

• 터널과지하공간
• /
• 제27권1호
• /
• pp.1-11
• /
• 2017

국내 지하 석회석 광산은 대부분 대단면 갱도로 개발되고 있으며 갱내통기는 주요 선풍기에 의한 통기방식보다는 자연통기 및 국부통기에 의존하고 있다. 국부통기는 국부선풍기와 풍관을 이용한 급배기 통기방식을 적용하고 있으나 대단면 갱도 특성과 갱내 굴진 운반장비의 디젤화에 따라 소요통기량이 대폭 증대하여 통기의 효율 및 경제성 확보가 주요과제로 대두되고 있다. 본 연구에서는 대단면 갱내 작업장 국부통기를 위한 선풍기 용량 최적화를 위하여 축류식 및 프로펠러 선풍기를 개발하여 갱내 승압력 및 통기효과를 비교 분석함을 목적으로 한다.

• 부모자녀건강학회지
• /
• 제16권1호
• /
• pp.11-16
• /
• 2013

Purpose: Ethiopia is one of the sub-Saharan countries most affected by high maternal and infant mortality. The government has trained health extension workers (HEWs), the community health workers, to deliver preventive and basic curative health services to community residents in Ethiopia. Very few studies have investigated on-the-job educational effects for HEWs on improvement of their knowledge and performance confidence in maternal and child health care (MCH). This study aimed at identifying the educational effects for HEWs in one health center in Tigray, Ethiopia on improvement of their knowledge in MCH. Methods: Twelve HEWs from 6 health posts participated in this study. A health center officer provided a total of 5 educational sessions on antenatal and postnatal care, family planning, and newborn care from August, 2012 to April, 2013. Ten to 12 items regarding the topics were tested before and after each education. Wilcoxon signed rank test was used to analyze the data. Results: All the HEWs were female with average 4-year working experience. Their knowledge significantly increased after education, except the first session. Their satisfaction on education was greater than 45 points out of 50. Conclusion: This study suggests a focused education for HEWs should continue to improve their capacity on MCH.

• 정보처리학회논문지D
• /
• 제12D권4호
• /
• pp.647-656
• /
• 2005

본 논문에서는 분산된 관리대상의 시스템자원과 사용자정보, 사용패턴을 Context로 수집하여, 구성 (Configuration)을 수행하는 적응형 자가관리시스템을 제안한다. 본 시스템은 기존에 수동으로 이루어지던 Configuration작업들(Install, Reconfiguration, Update)을 자율적으로 수행하여, 사용자의 시스템관리에 대한 부담을 줄여주게 되며, 많은 비용과 오류를 감소시켜준다. 본 시스템은 수집된 Context정보를 기반으로 사용자의 환경에 맞는 구성요소를 선택하여 설치하게 되며, 사용자의 기존 애플리케이션의 환경설정과 사용패턴을 기반으로, 보다 개인화된 설정을 해준다. 설정 이후에는 사용자의 행동을 암시적 피드백으로 받아, 이를 학습하고 유사한 상황이 다시 발생할 경우, 이를 다음 행동에 반영한다. 그리고 기존에 중앙서버로부터 일률적으로 관련파일을 전송하고 관리하는 중앙집중배포방식의 여러 문제점에 대응하기 위해 Peer-to-Peer방식으로 파일을 복사하고, 이를 통해 중앙서버의 과부하를 줄이는 동시에 빠른 파일의 배포가 가능하도록 하였다. 본 시스템의 평가를 위해 프로토타입을 구현하여, 기존 수동 Configuration작업, MS-IBM의 관련시스템과 비교를 수행하였으며, 기능적 측면과 작업에 소요되는 시간에 대한 비교결과를 통해 본 시스템의 유효성을 증명하였다.

• Design & Manufacturing
• /
• 제13권4호
• /
• pp.45-50
• /
• 2019

The fourth industrial revolution calls for an integrated talent by improving working-level skills within the big framework of creativity and convergence. Therefore, university education focuses on solving the problem of practical ability education by improving employment ability. Based on this improvement in practical skills, this study is based on the field-based design curriculum of Capstone. Currently, the Capstone Design Course is being implemented at most universities, extending its scope to the fields of engineering, humanities, social studies and arts. However, there is a limit to the core concept of Capstone design education and capacity education developed in line with the foreign educational environment and applied directly to our nation's university education. In terms of overseas cases, the core focus is to develop practical, design, and prototype capabilities by forming a team among all grades and multidisciplinary institutions to support the capital and manpower of the industry. However, the nation's industrial linkage and curriculum have difficulties in carrying out multi-disciplinary education. In this study, students were asked to team up and solve the challenges that the industry needs based on the expertise acquired in the lower grade curriculum by applying majors and 3D printing through the first and second semester courses of the fourth grade to address these limitations. In addition, business skills for the process of creativity and leadership experience in our country through a suitable design capstone class to review the efficiency of education by applying a model. In order to achieve the purpose of Capstone design subject, the goal setting, class model composition, class model application, verification and evaluation, and final class model development procedures were carried out. Through this process, it will be used as a basic material for educating design class capstone design.

• 터널과지하공간
• /
• 제25권6호
• /
• pp.543-555
• /
• 2015

최근 대단면 갱도로 개발하고 있는 국내 석회석광산은 작업공간 환기를 위하여 과거 석탄광산에 광범위하게 사용되던 형태의 국부 선풍기를 주로 이용하고 있다. 대단면 갱도에서의 낮은 정압손실을 고려할 때 고풍압 선풍기는 과다 설비용량으로 인하여 비용측면에서 심각한 한계를 보이고 있다. 대단면 갱도에서의 최적 선풍기는 안전한 작업환경 유지를 위한 충분한 환기량을 공급할 수 있어야 할 뿐만 아니라 저운전비용도 보장하여야 한다. 본 연구는 대단면 갱도 내에서 높은 환기효율과 경제성을 가지는 저풍압 국부선풍기를 개발함이 목적이다. 이론적 연구와 아울러 2개소의 단면적이 다른 현장 실험 연구를 통하여 저풍압 선풍기의 환기효율을 분석하였다. 본 연구결과는 작업공간 공기질 및 작업환경 개선을 위한 국부선풍기의 경제성과 효율 제고에 적용 가능할 것으로 기대된다.

• 보건행정학회지
• /
• 제27권3호
• /
• pp.256-266
• /
• 2017

Background: Primary health care (PHC) plays a major role to ensure the basic right and equal distribution of the essential health care services. This study presents comparative analyses of PHC in Korea and Uzbekistan, discusses the existing scenario and the challenges, and provides recommendations. Methods: This study reviewed secondary data from Korea's National Statistical Information Service and the State Committee of the Republic of Uzbekistan on Statistic, regulatory legislation, research reports, and policy papers by research and international institutions. We focus on comparing input and outcome health data, PHC structure, and health expenditure. Results: Overall health status of the population in Korea is better than in Uzbekistan; both countries achieved more than 95% immunization coverage. The reforms implemented in both countries provide initial health care service delivery. However, there are several challenges such as the distribution of the staff between urban and rural areas and interest of the graduates on specialization rather than working in PHC system. Conclusion: PHC plays an important role in the provision of medical services to the population, addressing both health and social problems; it is the best tool for achieving universal coverage for basic health needs of the population. The community health practitioners in Korea and nurses in Uzbekistan plays main role in universal coverage through providing essential health care services. Continuous reform of the PHC system should be directed to strengthen the capacity of the PHC staff in health promotion knowledge and activities as well as to encourage population to improve their own health.

• 한국구조물진단유지관리공학회 논문집
• /
• 제15권2호
• /
• pp.144-152
• /
• 2011

기존의 지하구조물 비개착축조공법은 구조물의 강성을 확보하기 위하여 가설구조인 강관에 철근을 설치하는데 시공시 좁은 공간으로 작업이 불편하고 배근작업으로 인한 자재비용이 과다하는 등 문제점이 있다. 이러한 문제점을 해결하는 차원에서 스틸 세그먼트를 이음부로서 연결하여 지하구조물 축조시 가설구조물을 형성하고 철근대신 강선이나 강봉을 설치하여 긴장력을 도입하는 새로운 공법인 P.S.T공법(Prestressed Segment Tunnel Method)이 모색되었다. 본 연구에서는 P.S.T공법 구조물의 휨성능을 평가하고자 그에 대한 실험적인 연구를 수행하였다. 세그먼트 형상비, 우각부 원형강관의 크기, 긴장량의 크기 및 이음부의 용접 유무를 실험변수로 설정하여 구조물의 휨거동 특성을 규명하고 부동한 변수에 따른 구조물의 처짐에 대한 효과를 분석하였다.