• Journal of Technologic Dentistry
• /
• v.37 no.3
• /
• pp.131-144
• /
• 2015

Purpose: This study set out to propose plans for more efficient and effective clinical practice by investigating the current state of clinical practice in the field of dental technology and thus provide basic data to develop pre- and post-education programs for clinical practice. Methods: The subjects include dental technicians at dental technical laboratories that were appointed as the place of clinical practice by the Department of Dental Technology of G University. The survey period spanned from December 22, 2014 to January 20, 2015. Total 250 questionnaires were distributed to them, and 190(76.0%) were returned. After excluding 23 whose answers were uncertain or seemed to lack reliability, total 167(66.8%) were used in final analysis. Results: 1. The most frequent practice the student did during clinical practice was articulator attachment, which was followed by pin operation or model making, one's own task and practice, sand and crow sculpturing, burying, casting, and grinding. 2. In case of going through the entire process, porcelain had the most students at 39(23.4%), being followed by crown & bridge at 28(16.8%), clinical model at 23(13.8%), full denture at 17(10.2%), and partial denture at 17(10.2%) in the order. 3. Of the students, 59.8%(30.5% for reinforced basic practice; 29.3% for intensive practice education) said that intensive practice education should be reinforced in school; and 22.3% said that intensive theory and practice education was needed, which indicates that 82.6% voiced their opinion of reinforcing education around practice. 4. The students felt that they lacked diligence, passion, and theoretical knowledge somewhat and were relatively good at clinical adaptation and operational skills. Conclusion: The findings show that the students felt an absolute lack of practice education as the school education was focused on theory and national exams in the field of dental technology, thus raising a need to reinforce practice education. Of all the respondents, 62.9% said there was a need to improve the current education with a focus on jobs. In future, education of dental technology should work to bring up able dental technicians that can perform in clinical dental technology right after graduation by reinforcing job-based practice education.

• Management & Information Systems Review
• /
• v.39 no.3
• /
• pp.17-35
• /
• 2020

The purpose of this study is to develop business models for current situational scenarios reflecting customer needs emphasize the need for implementing a logistics cooperation system by analyzing big data to strengthen SCM competitiveness capacities. For healthcare SCM competitiveness needed for the logistics cooperation usage intent, they were divided into product quality, price leadership, hand-over speed, and process flexibility for examination. The wordcloud results that analyzed major considerations to realize work efficiency between medical institutes, words like unexpected situations, information sharing, delivery, real-time, delivery, convenience, etc. were mentioned frequently. It can be analyzed as expressing the need to construct a system that can immediately respond to emergency situations on the weekends. Furthermore, in addition to pursuing communication and convenience, the importance of real-time information sharing that can share to the efficiency of inventory management were evident. Accordingly, it is judged that it is necessary to aim for a business model that can enhance visibility of the logistics pipeline in real-time using big data analysis on site. By analyzing the effects of the adaptability of a supply chain network for healthcare SCM competitiveness, it was revealed that obtaining competitive capacities is possible through the implementation of logistics cooperation. Stronger partnerships such as logistics cooperation will lead to SCM competitive capacities. It will be necessary to strengthen SCM competitiveness by searching for a strategic approach among companies in a direction that can promote mutual partnerships among companies using the joint logistics system of medical institutes. In particular, it will be necessary to search for ways to utilize HCSM through big data analysis according to the construction of a logistics cooperation system.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.4
• /
• pp.289-296
• /
• 2014

The rebar detailing is an important work influencing the final performance and quality of RC structures. But it is one of the most irrational and illogical activity in construction site. Many groups of workers, including main contractors, structural engineers, shop drawers, rebar fabricators, and etc., participate in this activity. A loosely-organized process for this activity is apt to produce a big amount of rebar loss or even degraded structures. A 3-dimensional rebar auto-placing system, called as Rebar Hub, has been designed and implemented in this research. Rebar Hub provides a totally integrated service from 3D structural modeling of buildings to rebar auto-placing considering anchorage, splice, and the length of ordered rebar. In addition, Rebar Hub can recognize the 2D drawing CAD files and then build 3D structural models which are used for the start point of 3D rebar auto-placing. After rebar auto-placing, each members of the 3D structural model have rebar information belonging to them. It means that the rebar information can be used for the afterward works such as quantity-survey, manufacturing and fabrication of rebars. Rebar Hub is showing outstanding performance while applying to practical projects. It has almost five times productivity and reduces the rebar loss up to 3~8% of the initially-surveyed amount of rebar.

• Archives of design research
• /
• v.12 no.4
• /
• pp.294-303
• /
• 1999

With the breakthrough development of computing environment, the design phases have been changed a lot nowadays. In the case of prior phases of transportation design such as cars and forklift-trucks design, designers have depended on surveys and 2D line drawings for fixing a product layout and extracting ergonomic data. In this method, designers don't meet only the problem of reliability of measuring data but also, the problems of unknown situation of operators' fatigue and comfort in work situation. In these methods, it has much less creditability to have a 2D human model to check the real world motion due to the limitation of the 3 Dimension. Even though with a 2D human model, perfect layout is determined, it is still difficult to measure about comfort and fatigue for a user because it measuring an analysing method is static. The development of computer hardware and software have not only changed the flow in the social-wide range but also immerged design into Virtual Environment. In conventional design method, visualization and data transferring have been the main issues but, in virtual environment, determining of design layout and analysing ergonomic data with sophisticated feeling about comfort and fatigue are possible by using 3D virtual human. In this study, the general characteristics of virtual environment was discussed and the possibility of digital process of design was treated. For these studies, layout design for forklift-trucks was tested. Eventually, the merits of each design phase applied virtual environment are discussed.

• Korean journal of food and cookery science
• /
• v.19 no.4
• /
• pp.477-492
• /
• 2003

The purposes of the study were to establish HACCP-based standards and guidelines for conducting a plan review to build, or renovate, hospital food service establishments, and ensure the safety of foodservice and reduce the risk of food borne illness. The scope of the study included suggestion for the planning of hospital foodservice facilities: layout, design, equipment and modeling. The results of this study can be summarized as follows: 1) The development of a foodservice facility plan based on the results of a survey, literature reviews and the results of interviews with foodservice managers from 9 general hospitals. This was composed of operational policies in foodservices, layout characteristics, space allocation, selection, design, specification standards for equipment and the construction principles of foodservice facilities. 2) Two foodservice facility models were developed, one for general hospitals with 900 beds (2,000 patients and 2,500 employee meals per day) and the other for general hospitals with 300 beds (600 patients and 650 employees meals per day). 3) The suggested kitchen space requirements for the foodservice facility models were 341.2 ㎡ (W 17,100mm x L 23,700mm) and 998.8㎡ (W 35,600mm x L 32,800mm) for the 300 and 900 beds hospitals, respectively, with both designs being rectangular. The space requirements for the equipment, in relation to the total operational area, in terms of ratios were 1:3.5 and 1:3.8 for the 300 and 900 beds hospitals, respectively. The recommended space allowances per bed for the developed foodservice facility models were 1.15 ㎡ and 1.11 ㎡ for the 300 and 900 beds hospitals, respectively, which were increased by more than 30% compared to those suggested in the precedent study, and considered appropriate for the implementation of the HACCP system. 4) The hospital foodservice facilities plans and models were developed based on the general sanitation standards, guidelines and the HACCP system, and included foodservice facility layout, product flow, physical separation between contaminated and sanitary areas, foodservice facility specifications with a 1/300 scale for a 300 bed, and a 1/400 scale for a 900 beds blueprint. 5) The main features of the developed foodservice facility plans and models were; physical separation between contaminated and sanitary areas to prevent cross contamination, product flow in one direction from the arrival of the raw material to the finished product, and separation of different work areas and the process of receiving & preparation of products, refrigeration & storage, cooking, assembly, cleaning & disinfection, employee areas and janitorial facilities. The proposed models from this study were presented as examples for those wanting to build, or renovate, their facility for the production of foods.

• KIPS Transactions on Computer and Communication Systems
• /
• v.8 no.9
• /
• pp.209-216
• /
• 2019

Publish-subscribe communication model is popular for various type of distributed applications because of its loosely coupled style connections. Among the various architecture style for publish-subscribe system, peer-to-peer architecture has been used for the mission critical application domain since it provides high scalability and real-timeness. On the other hand, to utilize the bandwidth of given networks, message filtering is frequently used to reduce the number of messages on the system. Even if P2P provides superior scalability, it is hard to apply filtering to the its messaging system because the filtering process should be done on the peer-side in P2P architecture that are usually done on the broker server in conventional pub/sub architecture. In this paper, we propose a hierarchical subscription management structure as well as message forwarding scheme for efficient data dissemination. Our proposed scheme reduces the number of received messages by filter-out un-wanted messages and offloading the message dissemination work to other subscribers to enhance the messaging throughput.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.9 no.11
• /
• pp.475-489
• /
• 2019

This study seeks to explore the method of imagination through creative new thinking in cultural heritage education and the most effective model of education in education. Research methods were organized by the methods of reviewing literature, browsing the Internet, and comparative analysis of prior research. We hope to realize the need for differentiated Korean cultural heritage and make efforts to incorporate our identity in the design. Through this study, we hope to realize the need for differentiated Korean cultural heritage and make efforts to incorporate our identity in the design. In the process of visualizing information, the focus should be on identifying the structure, characteristics, and the correlation between pattern and trend analysis, and the heterogeneity analysis, and should be made with the characteristics considered. Texting, graphics, sound, animation, lighting, and Navigation are often used as the expressive elements of information visualization for educational models. To facilitate the understanding of learners, accurate information transmission visuals should be presented. To do so, the use of infographic can be the answer. It is necessary to develop appropriate multimedia visual data, such as the use of infographic to be applied, and to develop various infographic multimedia visuals. These work should not be merely a research dimension, but should be carried out with the aim of helping develop actual cultural heritage educational content.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.24 no.4
• /
• pp.337-345
• /
• 2022

For data such as rainfall and soil moisture, it is important to obtain the values of all points required as geostatistical data. Spatial interpolation is generally performed in this process, and commercial software such as ArcGIS is often used. However, commercial software has fatal drawbacks due to its high expertise and cost. In this study, R, an open source-based environment with ArcGIS, a commercial software, was used to compare the differences according to the processing environment when performing spatial interpolation. The data for spatial interpolation was weather forecast data calculated through Land-Atmosphere Modeling Package (LAMP)-WRF model, and soil moisture data calculated for each cumulative rainfall scenario. There was no difference in the output value in the two environments, but there was a difference in user interface and calculation time. The results of spatial interpolation work in the test bed showed that the average time required for R was 5 hours and 1 minute, and for ArcGIS, the average time required was 4 hours and 40 minutes, respectively, showing a difference of 7.5%. The results of this study are meaningful in that researchers can derive the same results in a commercial software environment and an open source-based environment, and can choose according to the researcher's environment and level.

• Journal of Industrial Convergence
• /
• v.21 no.1
• /
• pp.9-31
• /
• 2023

This study is a study on the different cognitive systems and different knowledge systems of members participating in complex and diverse consulting projects, and it is a study on team collaboration that affects the team performance of the project. The purpose of this study is to analyze the mediating effects of team shared cognition, team transactive memory, team knowledge integration, and team efficacy in the cognitive interaction process of a consulting project. This study established a research model and research hypothesis based on previous studies. Data were collected from consultants who actually participated in the consulting project. To empirically analyze the research hypothesis, demographic analysis, validity and reliability analysis, structural model analysis for hypothesis verification, and mediating effect analysis using phantom variables were performed. As a result of the study, in order to increase team performance, it is necessary to improve team shared cognition and team transactive memory, which are cognitive systems, and team knowledge integration, which is a knowledge system, must also be improved. Therefore, there is a need for a sense of team efficacy that integrates disparate cognitive and knowledge systems, trusts each other's expertise, and enables successful team work. In addition, future studies on sub-factors of cognitive processes are needed.

• Journal of Industrial Convergence
• /
• v.21 no.4
• /
• pp.23-40
• /
• 2023

The style of leadership and leader's competence are expected to be an important role in the rapidly changing and uncertain circumstances of the business environment. In particular, rapid change of business environment requires organizations to innovate, and appropriate innovation can have a direct impact on an organization's competitive advantage and sustainability. In this regard, this study focused on transformational leadership as a factor that improves innovative behavior. In addition, the mediating effect of self-efficacy was verified in the process of transformational leadership leading to innovative behavior. Furthermore, the moderated mediating effect of psychological safety was also verified. To verify hypotheses, this study conducted a survey on 307 public officials who work in Chinese public institutions. The result was found that transformational leadership had a positive effect on innovative behavior by mediating effect of self-efficacy. However, contrary to the expectations of this study, the moderated mediation effect of psychological safety was found to be insignificant. The moderating effect of psychological safety showed an insignificant effect. It showed showed the different results from previous studies. In relation to these results, theoretical and practical implications were presented in this study. Overall, this study presented a plan to increase innovative behavior and verified the research model. In addition, the directions of future research for innovative behavior were presented.