• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2006.05a
• /
• pp.141-144
• /
• 2006

The building construction is an essential field to consider weather condition because construction works are performed in a site. From this reason, this study evaluated the effect of weather condition with work sections in building construction by Analytic Hierarchy Proces (AHP) method. The results of this study as follows : (1) The effect of weather condition with work sections is affected by rainfall in summer season, and by a low temperature in winter season (2) The effect of weather condition with work sections is 0.235 for mold work, 0.210 for concrete work, 0.181 for steel-frame work.

• Steel and Composite Structures
• /
• v.34 no.3
• /
• pp.333-345
• /
• 2020

In the past, many efficient profiles have been developed for cold-formed steel (CFS) members by judicious intermediate stiffening of the cross-sections, and they have shown improved structural performance over conventional CFS sections. Most of this research work was based on numerical modelling, thus lacking any experimental evidence of the efficiency of these sections. To fulfill this requirement, experimental studies were conducted in this study, on efficient intermediately stiffened CFS sections in flexure, which will result in easy and simple fabrication. Two series of built-up sections, open sections (OS) and box sections (BS), were fabricated and tested under four-point loading with same cross-sectional area. Test strengths, modes of failure, deformed shapes, load vs. mid-span displacements and geometric imperfections were measured and reported. The design strengths were quantified using North American Standards and Indian Standards for cold-formed steel structures. This study confirmed that efficient profiling of CFS sections can improve both the strength and stiffness performance by up to 90%. Closed sections showed better strength performance whereas open sections showed better stiffness performance.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1997.10a
• /
• pp.181-188
• /
• 1997

This work proposes possible use of the hyperdocument as a companion for structural steel designers and also as a part of any expert system to be used for the design of steel structures. AISC Specification for Structural Steel Buildings - Allowable Stress Design and Plastic Design, June 1, 1989-has been thoroughly hyperdocumented. Database for the most of AISC standard sections has been built for easier reference to sectional properties and even for search for the relevant sections. Hardy and wxCLIPS from AIAI, The University of Edinburgh were used as development tools. Hardy is integrated with NASA's rule-based and object-oriented language CLIPS 6.0 to enable users to rapidly develop diagram-related applications. Currently this work does not include any sophisticated rule-bases. Rather, this work will form a part of the expert systems for the steel structural design to be developed later. Nevertheless, the hyperdocument of this work will make a good companion for structural steel designers in its own right.

• International Commerce and Information Review
• /
• v.11 no.1
• /
• pp.309-331
• /
• 2009

In 25th April. 2008, the Korea legislature gave advance notice on the Revision Bill of Commercial Law in Insurance Division in partial, one of which is the principle of utmost good faith to be codified in accordance with the effectuation of the Revision Bill enforcement. For this, even though the disclosure duty is not included in the Revision Bill, it should also be discussed in relation to the principle of utmost good faith because it is based upon the principle of utmost good faith and forms a part of utmost good faith. In Marine Insurance industry in Korea, there are the sections and the clauses in relation to the English governing law included in the Policies and the Clauses used in Korea and, also, they still come into effect for the Korea Courts' judgements. So. we, Korea, should carefully pay attention to the trend of English courts' leading case, academic world and insurance industry on the disclosure duty in U.K. This study is thus based upon sections 17 and 18~20 of the Marine Insurance Act 1906 and sections 651, 652 and 655 of Commercial Law in Insurance Division, which appear throughout this work. The objective of this work is to analyse the duty of disclosure on Korean and English Insurance Laws including cases cited in this work, comparing the differences resulted from the analysis of the two countries‘laws and legal cases.

• Journal of Fashion Business
• /
• v.24 no.4
• /
• pp.63-84
• /
• 2020

It is essential to consider the heavy industrial working environment factors which are regarded as harmful to workers' health and safety and suitable work motion factors for the workers' motion while developing the work clothes for painting workers in the machinery and shipbuilding industries. This study suggests the use of 3D virtual clothing simulations as a solution to protect the human body from hazardous working conditions accompanying the development of painting work clothes and assessing the work motion performance associated with the comfort while workers wear them during the work clothes. The initial aim of the study is to examine a male avatar to run work motions simultaneously within a 3D virtual clothing simulator, secondly, to present the simulation images of coverall type men's painting work clothes with the application of two experimental painting work motions and one control motion to the avatar, and finally, to present the distance analysis images of the painting work clothes and the avatar body and air gap rates through the analysis of cross-sections of the avatar body while wearing the coverall work clothes according to the work motions. The results showed that the distance degree of painting work clothes to the avatar body for each part of the human body when performing painting work motions. Moreover, 3D virtual clothing simulations enabled the creation of a male model avatar to run painting work motions together and the painting work clothes developed were found to be suitable for the painting work motions.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2013.05a
• /
• pp.121-123
• /
• 2013

Research on the "Modernized Korean traditional housing" (Hanok) has been actively studied in succeeding to Korean traditional housing and providing the public with housing that required for modernized life style. The purpose of this study is to classify work sections for Hanok specifications. This paper analyzed the concepts and characteristics of existing specifications. It was found that the absence of standard classifications is one of the causes of missing work items and mixed scopes. Also, the contents of carpentry works have low level of details. Therefore, Hanok specifications, in this study, are required to have upper level standards and to encompass traditional and new construction methods. Further research will develop standard classifications, standard codes, and automated systems of Hanok specifications for improving quality and effectiveness.

• International Journal of Aeronautical and Space Sciences
• /
• v.4 no.1
• /
• pp.9-18
• /
• 2003

In this work, a closed-form analysis is performed for the structural response of coupled composite blades with multi-cell sections. The analytical model includes the effects of shell wall thickness, transverse shear, torsion warping and constrained warping. The mixed beam approach based on Reissner's semi-complementary energy functional is used to derive the beam force-displacement relations. The theory is validated against experimental test data and other analytical results for coupled composite beams and blades with single-cell box-sections and two-cell airfoils. Correlation of the present method with experimental results and detailed finite element results is found to be very good.

• Nuclear Engineering and Technology
• /
• v.54 no.3
• /
• pp.817-825
• /
• 2022

A recent benchmarking effort, under the auspices of the Organization for Economic Cooperation and Development (OECD) Nuclear Energy Agency (NEA), has been made to evaluate the current state of modeling and simulation tools available to model fluoride salt-cooled high temperature reactors (FHRs). The FHR benchmarking effort considered in this work consists of several cases evaluating the neutronic parameters of a 2D prismatic FHR fuel assembly model using the participants' choice of simulation tools. Benchmark participants blindly submitted results for comparison with overall good agreement, except for some which significantly differed on cases utilizing a molybdenum-bearing control rod. Participants utilizing more recently updated explicit isotopic cross sections had consistent results, whereas those using elemental molybdenum cross sections observed reactivity differences on the order of thousands of pcm relative to their peers. Through a series of supporting tests, the authors attribute the differences as being nuclear data driven from using older legacy elemental molybdenum cross sections. Quantitative analysis is conducted on the control rod to identify spectral, reaction rate, and cross section phenomena responsible for the observed differences. Results confirm the observed differences are attributable to the use of elemental cross sections which overestimate the reaction rates in strong resonance channels.

• Journal of Korean Society on Water Environment
• /
• v.37 no.5
• /
• pp.369-380
• /
• 2021

In this work, we analyzed the effects of drought on the water temperature (WT) of Nakdong river basin major river sections using Standardized Precipitation Index (SPI) and WT data. The analysis was carried out on a seasonal basis. After calculating the optimal time scale of the SPI through the correlation between the SPI and WT data, we used the copula theory to model the joint probability distribution between the WT and SPI on the optimal time scale. During spring and fall, the possibility of environmental drought caused by high WT increased in most of the river sections. Notably, in summer, the possibility of environmental drought caused by high WT increased in all river sections. On the other hand, in winter, the possibility of environmental drought caused by low WT increased in most river sections. From the risk map, which quantified the sensitivity of WT to the risk of environmental drought, the river sections Nakbon C, Namgang E, and Nakbon K showed increased stress in the water ecosystem due to high WT when drought occurred in summer. When drought occurred in winter, an increased water ecosystem stress caused by falling WT was observed in the river sections Gilan A, Yongjeon A, Nakbon F, Hwanggang B, Nakbon I, Nakbon J, Nakbon K, Nakbon L, and Nakbon M. The methodology developed in this study will be used in the future to quantify the effects of drought on water quality as well as WT.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.05a
• /
• pp.343-346
• /
• 2003

In order to construct the extrusion die surface of arbitrarily shaped sections, an automatic surface construction method based on NURBS surface and area mapping method is proposed in the present work. In the present study, a center point for area mapping is determined by introducing the marring concept based on constant area proportionality between original billet and final product. The characteristic points of inlet profile is determined using the traditional area mapping method and the root finding numerical method. The inlet and outlet profiles are precisely described with NURBS curves using the characteristic points of entry and exit sections. For the construction of NURBS surface, an interpolation method for the pre-determined two section curves has been developed to be used in the generation of interior control points and weights. To show the validity of the proposed method, automatic die surface generation is carried out for the several kinds of shaped sections.