• 한국운동역학회지
• /
• 제23권2호
• /
• pp.159-167
• /
• 2013

The purpose of this study was to evaluate the gender differences on gait pattern and the kinetics on lower extremities according to the different gait speed. Ten collegiate male students (age : $23.80{\pm}2.94$ yrs, height : $179.40{\pm}5.04$ cm, weight : $66.57{\pm}5.64$ kg) and ten female students (age : $23.40{\pm}2.91$ yrs, height : $166.06{\pm}5.61$ cm, weight : $53.76{\pm}2.75$ kg) participated in this study. To investigate the role, the ratio of the use, and the effectiveness of each joint during gait, we examined the joint work and the contribution to total work. The results of this study were as follows: First, gait pattern was not differ between male and female, hip joint ROM increased with the increase of gait speed both male and female. Second, the eccentric work of the ankle joint decreased with the increase of the gait speed both male and female, on the other hand increased on the knee joint. Third, in the result of the contribution to total eccentric work, male in both the two gait speed was the biggest on the hips joint. However, female in normal gait speed was the greatest on the ankle joint, was the most on the knee joint in the fast gait speed. Forth, the concentric work on the ankle and hip joint increased with the increase of gait speed both male and female. Fifth, in the result of the contribution to total concentric work, there is no difference in the male both the two gait speed, however decreased in the female on the knee joint with the increase of the gait speed, on the other hand increased on the ankle joint.

• 복식문화연구
• /
• 제31권1호
• /
• pp.18-33
• /
• 2023

Zero-waste pattern cutting is a groundbreaking sustainable fashion practice. However, few brands and designers have pursued this method because it requires creative pattern design that diverges from the existing process of using pattern slopers. Therefore, application within the fashion industry is not sufficient. Therefore, in an attempt to highlight the key characteristics of zero-waste pattern design, this study classifies and analyzes cases in which similar designs employ zero-waste pattern-cutting techniques. We hope to make zero-waste pattern design more accessible by presenting realistic pattern-cutting guidelines. To this end, theoretical research on relevant literature, previous research, and online resources and an empirical analysis of cases involving zero-waste pattern cutting were conducted in parallel. As a result of the study, we were able to classify the factors of zero-waste pattern design in terms of fabric use, design, and composition. Regarding materials, our research revealed the importance of appropriate fabric width, understanding the difference between waste minimization and minimal fabric use, and easy reuse and recycling. In terms of design, the simultaneous progress of pattern and design work, adjustable loose silhouettes, and the use of surplus fabric for functional and decorative details emerged as key characteristics. For composition, we found that size adjustment limits, arrangement irregularity, and pattern shapes were crucial elements and that various arrangements revealed unlimited design potential.

• 동아시아경상학회지
• /
• 제7권4호
• /
• pp.51-58
• /
• 2019

Purpose - This paper aims to analyze the difference of technological innovative pattern by industry. Research design and methodology - we try to identify the major factors which can exert an effective influence on actual innovation output, utilizing the result of Korean Innovation Survey. By doing so, this work can make a comparison with Pavitt (1984) and succeeding discussion on sectoral pattern of innovation Results - Analysis on major industry in Korea shows that there are substantial differences in terms of the source of innovation, organization-related factor, and appropriation mechanism among each industry, and differential strategy to be proper for the nature of each industry is needed. There is some variation within industries which deemed as same type of sector defined by Pavitt. Conclusions - This analysis call for elaborate analysis on sectoral pattern of innovation, considering the change and difference of innovative environment as well as differential business strategy and way to do innovate, which is proper considering the nature of innovative pattern in each industry for successful technological innovation in Korea. At the same time, proper policy measure considering the differential pattern of technological innovation is needed.

• 콘크리트학회지
• /
• 제9권1호
• /
• pp.133-141
• /
• 1997

본 연구에서는 사각형단면을 가진 철근콘크리트구조물의 한 최적설계방법을 제시하고자 한다. 철근콘크리트는 한 단면이 2가지의 재료로 구성되어 있으므로 이로인해 야기될 수 잇는 어려움을 해소하기 위해 변수분리의 원리를 도입하였다. 이 원리에 사용된 설계변수 및 제약조건은 외부 및 내부의 두 그룹으로 분류하고, 최적화과정도 외부 및 내부로 나누어진다. 최적화기법에는 Pattern Search을 수정한 Modified Pattern search 방법을 제시하며, 이의 정확도를 여러 가지의 다른 최적화기법들과 서로 비교함으로 이 방법의 우수성을 입증하였다. 이 방법으로부터 얻어지는 모든 설계는 하나의 최적설계이며 ACI318-89의 규정을 모두 만족하는 설계이다.

• Nuclear Engineering and Technology
• /
• 제53권11호
• /
• pp.3665-3674
• /
• 2021

One of the important parts of the in-core fuel management is loading pattern optimization (LPO). The loading pattern optimization as a reasonable design of the in-core fuel management can improve both economic and safe aspects of the nuclear reactor. This work proposes the hybrid of fuzzy logic controller with harmony search algorithm (HS) for loading pattern optimization in a pressurized water reactor. The music improvisation process to find a pleasing harmony is inspiring the harmony search algorithm. In this work, the adjustment of the harmony search algorithm parameters such as the bandwidth and the pitch adjustment rate are increasing performance of the proposed algorithm which is done through a fuzzy logic controller. Hence, membership functions and fuzzy rules are designed to improve the performance of the HS algorithm and achieve optimal results. The objective of the method is finding an optimum core arrangement according to safety and economic aspects such as reduction of power peaking factor (PPF) and increase of effective multiplication factor (Keff). The proposed approach effectiveness has been tried in two cases, Michalewicz's bivariate function problem and NEACRP LWR core. The results show that by using fuzzy harmony search algorithm the value of the fitness function is improved by 15.35%. Finally, with regard to the new solutions proposed in this research it could be used as a trustworthy method for other optimization issues of engineering field.

• 복식
• /
• 제52권2호
• /
• pp.31-44
• /
• 2002

This study was intended to inquire into Check Pattern. The purpose of this study attempted to make a systematic investigation of the characteristic of the Check Pattern, the checker using vertical and horizontal lines which was the universal plastic element and inquire into it in terms of era, designers and combined work. By doing so, this study attempted to Investigate the phase of the Check Pattern in world fashion and further forecast the future of checker design applicable to the 21th century fashion. The result can be summarized as follows : 1. Mondrim's neo-plasticism has not only had a great influence on Op Art and Minimalism work but is deeply related to fashion and textile design. Mondrian used vertical and horizontal line ad the dualistic element. 2. The checker is estimated to have been used since the Etruian times, though uncertain. and largely divided into the Madras check and Scotland Check. Though the origin of the tartan representation of the Scotland check can not be accurately found out, it began to emerge in around the 13th century. 3. Check Pattern has began to be widely used with the development of the textile industry since 1826 and been used in every typical Sihoutto appearing in each era up to the present. And Check Pattern is used most designer in the world, who represent their own personality in their works. This study could find out that the checker is the element of Infinite applicability in the future. It is expected that the sophisticated and beautiful design using the chocker will be presented by many korean designer though the overall and systematic study of the checker.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제15권1호
• /
• pp.1-6
• /
• 2015

In this work, the combined meandering-pattern stress-sensors were presented in order to achieve the high sensitivity of stress sensors. Compared to the previous works, which have been using the single meandering-pattern stress-sensors, the sensitivity was approximately observed to increase by 30%~70%. Also, in this paper, more simple and convenient stress-measurement method was presented.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 춘계학술대회 논문집
• /
• pp.361-364
• /
• 2011

In this paper, This work demonstrates a experimental evaluation for vehicle road noise NVH performance from the component-level NVH measurements of Tire. The power unit noise from tire emitted by cars has been reduced. It has been found that tire noise dominates noise produced by the power train when vehicles are driven at high constant speed. Therefore tire pattern noise is affected by pattern and vehicle and transmission loss. Tire noise mechanism is generated by several mechanisms. The sound of tire can propagate either through the air or through the structure of vehicle. Pattern noise is the result of pressure variations through the air to the interior side of vehicle. Especially, smooth asphalt, the periodicity of tread design, groove depth is important factor, which have an influence on the reduction of tire pattern noise.

• 한국의류산업학회지
• /
• 제18권5호
• /
• pp.658-667
• /
• 2016

The purpose of this study is 1) to research how practitioners in fashion industry in South Korea perceive concepts of Technical Design/Designer, 2) to compare and analyze issues at work by occupation, 3) to research specific works in garment development process, and 4) to compare and analyze work involvement by occupation, type of a company and etc, and 5) to propose the role of Technical Designers in apparel companies in South Korea. There were two methods to conduct this study, which were in-depth interview and survey. Both methods were conducted to designers, merchandisers, pattern makers, technical designers, and production coordinators. Frequency analysis, ANOVA, Duncan test, and Factor analysis were performed to get results by using SPSS 18.0 program. The results are following. There were 50 works during garment development process from the result of in-depth interview, and 6 factors were obtained from the result of Factor analysis, which were 'Works about Sample in Sample Development Process', 'Works about Product's Pattern and Size Spec', 'Works about Development of Garment's Design', 'Works about Planning of Product Development and Management of Product in Stock', 'Works about Production Process', and 'Preparation Works for Sample Development'. In conclusion, technical designer in apparel companies in South Korea should be in charge of works about sample in sample development process and decision making of product' size spec, which is included in works about product's pattern and size spec. Also, they should complete technical package after product is developed by designers.

• Safety and Health at Work
• /
• 제12권3호
• /
• pp.384-389
• /
• 2021

Background: Social distancing by working-from-home is an effective measure to decrease the spread of COVID-19. However, this new work pattern could also affect the well-being of workers. Therefore, the aim of the study was to study the magnitude of occupational health problems and lifestyle changes among workers who have only recently started working from home. Methods: A cross-sectional study was conducted using online self-administered questionnaires during the coronavirus disease 2019 pandemic in the Bangkok metropolitan area, Thailand. The participants were from any organization that allowed working from home. The demographic data including the analysis of the characteristics of working from home, the occurrence of occupational health problems, and the lifestyle changes caused by working from home were analyzed. Results: A total of 869 workers were included as study participants. The highest prevalence of physical health problems among all workers was identified to be weight gain at a rate of 40.97% (95% confidence interval = 37.69-44.24), and the highest prevalence of psychosocial problems was identified to be cabin fever at a rate of 31.28% (95% confidence interval = 26.66-35.90%) among full-time working-from-home workers. The health effects that were significantly related to the intensity of working from home (p for trends <0.05), either positively or negatively, included body weight changes, ergonomic problems, indoor environmental problems, and psychosocial problems. Meanwhile, the lifestyle changes related to work intensity included eating pattern, sleep habits, and exercise. Conclusions: Working from home can affect workers' well-being in various aspects. Hence, occupational health providers must prepare for risk prevention and health promotion in this "new normal" working life pattern and for future pandemics.