• Korean Journal of Occupational Health Nursing
• /
• v.15 no.2
• /
• pp.133-143
• /
• 2006

Purpose: The purpose of this study was to examine the relationship between perceived job stress and work environmental factors related with socioeconomics factors and physical burden in the golf caddies. Methods: Job stress in golf caddies was estimated by using the Karasek's job content questionnaire (JCQ) and work environmental factors were estimated by self-reported questionnaire and interview. Results: The subjects were 316 woman caddies who had never been occupationally exposed to hazardous chemicals, was mean age 31.1 years. Mean work duration was 6.44 years and working hours per day on low- and high-demand season were 6.16 and 10.51, respectively. The golf caddies displayed higher scores of job stress due to multiple factors such as working hours and frequency of rounding per week, physical burden, confliction, income satisfaction and employment stability. We found that high strain group was positive correlation with age, career, working hour (including frequency of rounding) and job demand, however, showed negative correlation with job decision latitude and support of supervisor and coworker. Conclusion: In conclusion, we suggest that the golf caddies be regard divided into high strain group as appropriate. Thus, stress management and health promotion program for golf caddies should be developed.

• Safety and Health at Work
• /
• v.15 no.2
• /
• pp.236-241
• /
• 2024

Background: Gasoline, a complex mixture of volatile organic compounds is classified as possibly carcinogenic to humans. Gasoline station attendants, consistently exposed to its hazardous components, may face genotoxic effects. This study aimed to assess the influence of varying work shift durations on DNA damage in gasoline station attendants. Methods: Ninety individuals from three locations in southern México were studied. Peripheral blood mononuclear cells (PBMCs) were isolated, and DNA damage was assessed using the comet assay. Demographic, occupational, and lifestyle data were collected. Statistical analyses included t-tests, ANOVA, and Pearson correlation. Results: Significant differences in DNA damage parameters were observed between exposed and unexposed groups. The impact of tobacco, alcohol, and exercise on DNA damage was negligible. Extended work shifts (12 and 24 hours) showed heightened DNA damage compared to 8-hour shifts and the unexposed group. A novel finding revealed a modest but significant correlation between DNA damage and job seniority. Conclusion: The study highlights the intricate relationship between occupational exposure to gasoline components, DNA damage, and work shift lengths. Extended shifts correlate with heightened genotoxic effects, emphasizing the importance of personalized safety measures. The significant correlation between DNA damage and job seniority introduces occupational longevity as a determinant in the genetic health of gasoline station attendants. This discovery has implications for implementing targeted interventions and preventive strategies to safeguard workers' genetic integrity throughout their years of service. The study calls for further exploration of unconsidered factors in understanding the multifactorial nature of DNA damage in this occupational setting.

• Korean Journal of Occupational Health Nursing
• /
• v.6 no.2
• /
• pp.79-95
• /
• 1997

The purposes of this study were to develop a job stress measurement tool and to identify the job stress according to the characteristics of worker and work condition at the small and medium-sized plants. Data were collected through face-to-face survey for April-May, 1997. Subjects were 180 workers at 36 small and medium-sized plants located near Seoul. Data were analyzed by item analysis, factor analysis, and ANOVA. The results were as follow : 1, Number of items of job stress measurement were 33 and Cronbach's $\alpha$ was .9262 except 13 items with low values of Cronbach's coefficient. Factor analysis was done in order for construct validity and 8 factors were extracted and cumulative percent of variance was 65.6%. 2. The job stress scores of male, the younger, 2-shift workers, and over-time workers were significantly higher than those of female, the older, 1-shift workers, and 48 hour workers per week. 3. There were no significant difference between job stress scores and the groups by number of worker, and the types of manufacturing. The stress measurement tool is valid and very reliable to measure worker's stress. Furthermore, the job stress managent program for health promotion of the workers at the vulnerable work condition is needed more and more.

• BMB Reports
• /
• v.43 no.4
• /
• pp.257-262
• /
• 2010

The aim of work was to investigate changes of 7-ketocholesterol synthesis in alveolar macrophages in the dynamic of lung mechanical ventilation with injurious parameters. The goal of in vitro part of work was to observe influence of 7-ketocholesterol on iNOS and MIP1 $\beta$ production in bronchoalveolar lavage fluid (BALF) cells. We used 17 healthy domestic pigs randomly assigned into two treatment groups: group I with mechanical ventilation with physiological parameters; group II underwent injurious ventilation with high volume tidal (VT) and low positive end expiratory pressure (PEEP). Cells were analyzed for CYP27A1 protein and gene expression levels, 7-ketocholesterol production. In alveolar macrophages of group II, we obtained increase of production of CYP27A1 protein and 7-ketocholesterol, as well as the expression of the CYP27A1 gene at the 2nd hour of ventilation. In the in vitro experiments we show dose-dependent increase of MIP1 $\beta$ and decrease of CYP27A1, iNOS protein production after 7-ketocholesterol treatment.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2006.05a
• /
• pp.103-106
• /
• 2006

This study proposes a method of generating steel house shop drawing in an automated design method, reducing construction manpower and period. With one hour fire-resistant approval code, reflecting work ability and efficiency, steel-framed house market is expected to extend from one or two story house to multi-purpose facilities up to four story height. More models have been constructed in this system than the first appearance of fire-resistant approval in Korea in 1997. Also, cost estimation of components such as frame walls, roof trusses and floors is obtained with shop drawings. Also, the lack of suppliers of steel framed house shop drawing and unstandardized drawing method get constructors have difficulty in understanding its design. In steel framed house industry, shop drawings are essential part in building and constructing framework and they have major effects on construction deadlines and expenses. By exploring method of shop drawing automation, this study aims to optimize work flow with a standardized drawing method. The proposed system can be applied to manufacturing automation in domestic industry of factory-built panelizing method in the near future.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.12 no.2
• /
• pp.1965-1970
• /
• 1970

The experiment was carried out in order to improve the leakage stopping work in the irrigation canal founding on the porous soil. But the experiment had many problems to be studied more owing to the insufficient time and facilities. The results obtained are summarized as follows; 1. Polyethylene film is estimated not to make strength decrease owing to buring in the subsoil, but to make owing to the sunlight. 2. Coated nylon shows the tendency to deteriorate strength when it is buried in the earth or exposed to the sun for long time, but leakage is all but impermeability generally. 3. Leakage loss rates for one hour show some differences in the canal to be full with water in accordance with operating methods, that is, the clay lining section is 12.6%, the coated nylon lining section is 1.7%, the polyethylene film lining section is 1.3%, respectively. 4. Leakage quantities per wetted perimeter unit area show $3.556cc/cm^2/hr$. in the clay lining section, $1.574cc/cm^2/hr$. in the coated nylon section, $0.695cc/cm^2/hr$. in the polyethylene film lining section, respectively. 5. When the construction fund make the clay lining section as a standard, the polyethylene film section is 92.1%, the coated nylon section is 174.2%, respectively. But, the unit cost of execution may be low when the polyethylene film and the coated nylon will enable to mass-produce for the purpose of execution.

• Journal of Welding and Joining
• /
• v.22 no.4
• /
• pp.35-42
• /
• 2004

Contact tips are required to have a higher resistance to wear and thus to have an extended life time under the advanced GMAW welding process. Several requirements have been specified and employed by domestic industries for selecting their tips for such a purpose. However no attempt has been made to justify their requirements based on the experimental data of wear resistance or life time of contact tips. In this study, five different contact tips with three different compositions were employed for actual GMA welding up to 4 hours and were evaluated their wear resistance by measuring in every one hour the area of enlarged hole at the exit side. Experimental results clearly showed that the Cr-containing tips strengthened by precipitation hardening have much better resistance to wear than those made by work hardening. It was further noticed that Cr is an excellent alloying element for improving the wear resistance of contact tips only when it is in an properly aged condition. Initial hardness may play some role in the early stage of wear but not in the later stage of welding because the microstructure of tip changes significantly by the prolonged exposure to welding arc heat. Based on these results, critical review has been made on the current requirements employed by domestic industries. Of importance is that a new guideline has been confirmed to be more reasonable.

• Design & Manufacturing
• /
• v.2 no.2
• /
• pp.15-19
• /
• 2008

In this paper, the automatic assembly and packaging system was developed for PET blow molding products. The PET blow molding products mainly are used in groceries case and are in great demand. Generally, the molding process is compose of 4 processes such as plastic resin injection, molding, ejecting and packaging. In case of packaging process, although amount of work per hour is very large, all processes are still performed by the manual work. For this reason, the automatic packaging system was developed with the function of automatic hand-grip part assembly. For the development of system, the existing processes and the shape of molding product were analyzed and specifications were deducted. Finally, the automatic assembly and packaging system was developed and applied to the manufacturing field.

• Journal of Korean Biological Nursing Science
• /
• v.7 no.2
• /
• pp.5-15
• /
• 2005

The purpose of this study was to compare the sleep and fatigue between groups with two shift and three shift nurses. A total of 14 nurses working in Neonatal Intensive Care Unit(NIC) were included with the seven for two shifts and the other seven for three shifts. Data were collected by Korean version of sleep tool(Oh et al., 1998) and fatigue symptom tool(Kim et al., 2001) and analyzed using SPSS PC 12.0. The results of the study were as follows: 1) There was statistically a significant difference in the number of total sleep hour and no difference in fatigue between groups. 2) There were no significant differences found in both sleep and fatigue by demographic characteristics between groups. 3) There were no correlations between sleep and fatigue in both groups. Through the further future studies, the findings of this study were expected to provide an opportunities for exploring the information on 2-shift nurses as well as 3-shift nurses and to offer the fundamental data on an arrangement of work force according to the types of shift work.

• Journal of Korean Institute of Industrial Engineers
• /
• v.25 no.4
• /
• pp.459-465
• /
• 1999

A new-concept VDT workstation chair with adjustable keyboard/mouse support was proposed to minimize physical discomfort and the risk of cumulative trauma disorders (CTDs) at work sites in this study. First, a three-dimensional human modeling tool $(SAFEWORK^{(R)})$ was used to design the new chair satisfying the anthropometric specifications of Korean population. Second, based upon the result of 3-D graphical simulation, a mock-up chair was constructed with an adjustable keyboard/mouse support directly attached to the chair body. Third, muscle fatigue and subjective discomfort were measured to evaluate the newly developed chair. An experiment was conducted to compare the new workstation chair to the traditional computer chair without keyboard/mouse support. Six volunteer subjects participated in six one-hour word-processing sessions with two different chairs and three different postures. Statistical results indicate that the new-concept VDT chair generally improved subjective comfort level and reduced fatigue in finger flexor/extensor and low back muscle. In conclusion, this new VDT workstation chair is expected to reduce physical discomfort and prevent occupational CTD problems in the long run. Implications of the new design and suggestions for the further development are also addressed.