• Tribology and Lubricants
• /
• v.12 no.4
• /
• pp.35-42
• /
• 1996

The labyrinth seal is one of the widely used non-contact type mechanical seal. Current work was emphasized on the investigation of the air jet effect on the labyrinth seal. To improve the sealing capability of conventional labyrinth seal, air jet was injected against through the leakage flow. In this study, both of the numerical analysis by CFD (Computational Fluid Dynamics) and the experimental measurement were carried out. Both of the turbulence aad the compressible flow model were introduced in CFD analysis. The sealing effect of the leakage clearance and the air jet magnitude were studied in the experiment. The reason of the enhanced sealing was explained as a reduction of effective clearance by jetting air. As a result, the air jet could reduce the effective clearance with a wide range of leakage clearance.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.2
• /
• pp.168-175
• /
• 2003

A new algorithm based on Genetic Algorithms is proposed f3r solving process optimization problems formulated in MINLP, GDP and hybrid MINLP/GDP. This work is focused especially on the design of the Genetic Algorithm suitable to handle disjunctive programming with the same level of MINLP handling capability. Hybridization with the Simulated Annealing is experimented and many heuristics are adopted. Real and binary coded Genetic Algorithm initiates the global search in the entire search space and at every stage Simulated Annealing makes the candidates to climb up the local hills. Multi-Niche Crowding method is adopted as the multimodal function optimization technique. and the adaptation of probabilistic parameters and dynamic penalty systems are also implemented. New strategies to take the logical variables and constraints into consideration are proposed, as well. Various test problems selected from many fields of process systems engineering are tried and satisfactory results are obtained.

• Journal of Korean Institute of Industrial Engineers
• /
• v.32 no.4
• /
• pp.358-368
• /
• 2006

The significance of intellectual property in the knowledge-based society has been increasing and as a result, the patent customer's demand for a top quality patent administration service has increased as well. Therefore, Korean Intellectual Property Office(KIPO) adopted 6 sigma as a tool for KIPO's innovation to improve the quality of patent administration and enhance customer satisfaction. KIPO's steadfast promotion of 6 sigma resulted in many successful outcomes such as improvement of policy and service process from customer's point view, streamlining the administrative procedures, increased work efficiency, capability enhancement of core personnel, and so on. Since 6 sigma has proved itself to be equipped with features suitable for innovation in public sector, it can be used as an extensible innovation tool to meet the challenges in rapidly changing administration environment and to achieve a competitive edge.

• Industrial Engineering and Management Systems
• /
• v.7 no.2
• /
• pp.150-159
• /
• 2008

Lots of EDI-VAN companies are in need of transforming their business transaction systems into Web-based e-Business frameworks because of high cost and closed structure of EDI systems. This research proposes several e-Transformation strategies for EDI-VAN companies to adopt Web-based e-Business frameworks such as ebXML and RosettaNet. Four transformation alternatives are presented and transformation procedure for a medium-sized company is described. The result of this work can be used as a practical guideline for EDI companies to develop their own transformation strategy suitable to its scale and capability, while minimizing the impacts on the pre-existing business processes and information systems.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.4
• /
• pp.1610-1620
• /
• 2015

A major problem in conventional multilevel inverter is that an increase in power semiconductor switches causes an increase in cost and switching losses of the inverter. The multicarrier strategy adopted for the multilevel inverters has become more popular due to reduced cost, lower harmonic distortion, and higher voltage capability than the conventional switching strategy applied to inverters. Various topologies and modulation strategies have been reported for utility and drive applications. Level shifted based pulse width modulation techniques are proposed to investigate the performance of the multilevel inverter. The proposed work focuses on reducing the utilized switches so that the cost and the switching losses of the inverter do not go up and the consistent efficiency could be achieved. This paper presents the detailed analysis of these topologies. The analysis is based on the number of switches, DC sources, output level, maximum voltage, and the efficiency. As an illustration, single phase cascaded multilevel inverter topologies are simulated using MATLAB/SIMULINK and the experimental results demonstrate the viability of these inverters.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.11
• /
• pp.1912-1920
• /
• 1997

In the analysis of metal forming process, ALE(Arbitrary Lagrangian Eulerian) finite element methods have been increasingly used for the capability to control mesh independently from material flow. The methods can be divided into two groups i.e., coupled and split formulations. In the present work, the split ALE formulation is used for computational efficiency. A split ALE finite element method developed for rigid-viscoplastic materials and applied to the analysis of hot square die extrusion. Since thermal state greatly affects the product quality, an ALE scheme for temperature analysis is also presented. As computational examples, profile shapes as square and cross-like sections are chosen.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.5 no.2
• /
• pp.10-15
• /
• 2006

An introduction to orthogonal cutting model by FEM is given, followed by a review of similar work. The cutting process is treated as quasi-static and strain rate insensitive, so the model is applicable only to low speed cutting operation. Chip separation is accomplished along a predefined cutting path by means of an element death procedure. Contact elements with friction capability are used to model the interaction between the tool and the workpiece. FEM results are compared with cutting experiments with low speed for brass, and good correlations are found.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1190-1194
• /
• 2007

Since the dismantling processes of building are very dangerous, there have been many studies to develop a remote operating devices using joystick. In this paper, in order to improve the operability of the dismantling actuator that is usually an excavator, a novel concept of tele-operated haptic device is proposed. Operators who use this haptic device with additional environmental sensing devices can work safely away from the dangerous sites. First, based on the concept design of the haptic device, the workspace mapping from the haptic device to the excavator is explored. Second, the kinematics which deals with the conversion from the 3 dimensional position information of the haptic device to the joint variable information of the backhoe is included. Lastly, 3D graphical simulation of both haptic device and the backhoe will be shown. This new design of the haptic device can be easily manufactured and gives the workers very convenient and transparent remote control capability.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.13 no.4
• /
• pp.73-78
• /
• 2004

The conventional SLT(Shear Lag Theory) which has been proven that it can not provide sufficiently accurate strengthening predictions in elastic regime when the fiber aspect ratio is small. This paper is an extented work to improve it by modifying the load transfer mechanism called NSLT(New Shear Lag Theory), which takes into account the stress transfer across the fiber ends and the SCF(Stress Concentration Factor) that exists in the matrix regions near the fiber ends. The key point of the model development is to determine the major controlling factor among the material and geometrical coefficients. It is found that the most affecting factor is the fiber/matrix elastic modulus ratio. It is also found that the proposed model gives a good result that has the capability to correctly predict the elastic properties such as interfacial shear stresses and local stress variations in the small fiber aspect ratio regime.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.1
• /
• pp.82-88
• /
• 2005

The damage inspection of container surface is performed by the expert inspectors at the container terminal gate of harbor. In this paper, we substitute the expert's capability with the damage inspection system using the artificial intelligent control algorithm and vision system, so we can improve the work environment and effectively decrease the inspection time and cost. Firstly, using six CCD cameras attached to the terminal gate, whole container is partially captured according to eleven sensors aligned with the entering direction of container. Captured partial images are inspected by the fuzzy system which the expert's technology is embedded. Next, we compose partial images to be a complete container image through the correlation coefficient method. Complete container image is saved to solve future troublesome problems. In this paper, the effectiveness of the proposed system was verified through the field test.