• 한국방재학회:학술대회논문집
• /
• 2007.02a
• /
• pp.344-348
• /
• 2007

This study was made a process of earth work amount and earth work transfer etc. This research uses DAS S/W and GIS S/W, comparison and analyze. DAS S/W is a program develop in Korea land corporation. This purpose of this study is presenting a method that at it, can calculate detailed earth work. Also, apply GIS method to DAS S/W using earth work calculation data. when GIS analysis method applied. it can improve the accuracy of earth work calculate method and earth work model's efficiency.

• Journal of the Korean Institute of Rural Architecture
• /
• v.8 no.1
• /
• pp.17-24
• /
• 2006

The purpose of this study is to provide the systematic report and analysis about Apartment VE application in Design Phase. In this study, the method of VE application is classified into foure groups-changing materials, changing a method of construction, acceptance of new technology, and use of new device. The facts found in this study can be summarized as follows. Application rate of VE is highest in building circumference parts. The main reason would be that there are many applicable factors according to locations, types of work, etc. Parking lots also show similar results with the same reason. It means there are a lot of possibility to adapt value engineering in these steps during the work. So far application of value engineering has been so limited that just small changes of process or method have been tried. One reason is the lack of challenging and the other is some characteristics of construction work which is very difficult to fix after completion. In the future, it would be more efficient to apply new technology and new device in construction work. Though these attempts have been ignored in Korea so far, there are still lots of possibilities to be developed in value engineering.

• Structural Engineering and Mechanics
• /
• v.73 no.1
• /
• pp.97-108
• /
• 2020

This study presents a 4 node, 11 DOF/node plate element based on higher order shear deformation theory for lamina composite plates. The theory accounts for parabolic distribution of the transverse shear strain through the thickness of the plate. Differential field equations of composite plates are obtained from energy methods using virtual work principle. Differential field equations of composite plates are obtained from energy methods using virtual work principle. These equations were transformed into the operator form and then transformed into functions with geometric and dynamic boundary conditions with the help of the Gâteaux differential method, after determining that they provide the potential condition. Boundary conditions were determined by performing variational operations. By using the mixed finite element method, plate element named HOPLT44 was developed. After coding in FORTRAN computer program, finite element matrices were transformed into system matrices and various analyzes were performed. The current results are verified with those results obtained in the previous work and the new results are presented in tables and graphs.

• Korean Journal of Construction Engineering and Management
• /
• v.6 no.4 s.26
• /
• pp.152-163
• /
• 2005

Pile driving work causes a vibration problem in the construction site using pile foundation and often causes civil affairs by construction noise around the construction site. For the vibration and noise problems, the driving after drilling method rather than the direct driving method is being generalized for reducing vibration and noise. However, this method also causes civil affairs when the driving work is operated in adjacent area. This study suggests a criterion for evaluating an optimal allowed distance for pile driving work by the driving after drilling method. Actual surveys of vibration and noise for pile driving work in seven construction sites were used for developing regression analysis equations. The results can be a standard to estimate the allowed distance to avoid vibration and noise problems in pile driving work for deep foundation.

• International Journal of Computer Science & Network Security
• /
• v.22 no.5
• /
• pp.317-319
• /
• 2022

Rich morphology language such as Arabic needs more investigation and method to improve the sentiment analysis task. Using all document parts in the process of the sentiment analysis may add some unnecessary information to the classifier. Therefore, this paper shows the ongoing work to use sentence location as a feature with Arabic sentiment analysis. Our proposed method employs a supervised sentiment classification method by enriching the feature space model with some information from the document. The experiments and evaluations that were conducted in this work show that our proposed feature in the sentiment analysis for Arabic improves the performance of the classifier compared to the baseline model.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.6
• /
• pp.140-145
• /
• 2011

An anisotropic beam model is proposed by employing an asymptotic expansion method for thermo-mechanical multiphysics environment. An asymptotic method based on virtual work is introduced first, and then the variables of mechanical displacement and temperature rise are asymptotically expanded by taking advantage of geometrical slenderness of elastic bodies. Subsequently substituting these expansions into the virtual work principle allows us to asymptotically expand the virtual work. This will yield a set of recursive virtual works from which two-dimensional microscopic and one-dimensional macroscopic equations are systematically derived at each order. In this way, homogenized stiffnesses and thermomechanical coupling coefficients are derived. To demonstrate the validity and efficiency of the proposed approach, composite beams are taken as a test-bed example. The results obtained herein are compared to those of three-dimensional finite element analysis.

• Journal of the Ergonomics Society of Korea
• /
• v.31 no.1
• /
• pp.185-189
• /
• 2012

Objective: The aim of this paper is to introduces Hyundai Heavy Industry's ergonomic risk assessment tool, H-OWAS, which is considering work load and frequency compared to the OWAS. Background: As prevalence of work-related musculoskeletal disorders(WMSDs) in ship building industries has been much higher than that in other industries, most of the large scaled corporations have implemented their own prevention program since legislation on the prevention of WMSDs had introduced in 2003. Method: This paper introduces WMSDs prevention program, HEMP(HHI Ergonomics Management Program) which consists of risk assessment, improvement efforts of working environments, medical treatment and training/evaluation and describes how to operate the program. We also describe application of OWAS method considering work load and frequency for risk factor analysis(H-OWAS) and shows methodology for assessing the ergonomic risk factor. And comparison of the assessment results between OWAS and H-OWAS is carried out by statistical analysis. Result: There was statistically significant difference in the assessment results between OWAS and H-OWAS, and regression shows H-OWAS explains the borg's scale of perceived exertion more clearly than OWAS. Conclusion: H-OWAS has been proved more effective tool than OWAS to evaluate ergonomic risk factor under real working condition. Application: H-OWAS can be widely applied to the many other companies when implementing the ergonomics risk assessment.

• Nuclear Engineering and Technology
• /
• v.52 no.2
• /
• pp.223-229
• /
• 2020

The present work proposes a solution to the static Boltzmann transport equation approximated by the simplified P₃ (SP₃) on angular, and the analytic coarse mesh finite difference (ACMFD) for spatial variables. Multi-group SP₃-ACMFD equations in 3D rectangular geometry are solved using the GMRES solution technique. As the core time dependent analysis necessitates the solution of an eigenvalue problem for an initial condition, this work is hence devoted to development and verification of the proposed static SP₃-ACMFD solver. A 3D multi-group static diffusion solver is also developed as a byproduct of this work to assess the improvement achieved using the SP₃ technique. Static results are then compared against transport benchmarks to assess the proximity of SP₃-ACMFD solutions to their full transport peers. Results prove that the approach can be considered as an acceptable interim approximation with outputs superior to the diffusion method, close to the transport results, and with the computational costs less than the full transport approach. The work would be further generalized to time dependent solutions in Part II.

• Journal of Korean Society for Quality Management
• /
• v.35 no.4
• /
• pp.67-77
• /
• 2007

We tried new interpreting about the work of art in this paper. The work of art respects the intention of the artist to make it and interprets intention until now. After critics distinguish by a period, an area that they set to philosophical thought which is the time and interpreted. We set to each one subjectivity and interpreted between artist to make the work of art and appreciator. But in this paper, we tied various criteria which appreciates the work of art. We tried so that we presented the intimacy each other newly. Otherwise we tied with the subjectivity of the individual and are the try to be an objectification low through statistical technique. We looked into the culture and art in the introduction and explain the discussion about the work of art interpreting which the main subject. We set the category 6 area, and explain an each criteria explanation and assessment method. We tried to propose new interpreting as the intimacy to be multi-variate data analysis result of the assessment analysis.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.4
• /
• pp.904-914
• /
• 1998

BPR(Business Process Reengineering), a radical improvement approach of business process, has been paying attention, and work-flow management and automation has been concentrated on progress velocity of business process and productivity of engineers. In software engineering, software process engineering which focus to process begin to be watched, and for the purpose of software productivity and quality progress and reduction of development term, study on SPR(Software Process Reengineering) is being progressed. In this paper, made workflow analysis and design method for construction of work-flow management system of software process to stand firm process reengineering methodology. In other words, we studied modeling process methods for SPR process, and software process structure and workflow analysis method which construct software process workflow model and specification definition method of workflow software.