• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2003년도 학술.기술논문 발표회
• /
• pp.73-76
• /
• 2003

Recently, as the alternatives to preserve environment such as effective usage of wastes or unusable resources are drawing attentions, researches and measures for the two tasks, which are reuse of waste wood and development of eco-friendly materials, are being examined and established in various fields. However, they are still insufficient. Therefore, in this study, for the efficient application of waste woods and eco-friendly effects, mortar was produced using sawdust as the waste wood and mineral material cement for combination, in order to produce inorganic boards using waste woods, which were made when sawing. This study attempted to suggest a basic material about the physical properties of mortar, which used waste woods, after examining the features of wood mixture rate, water-cement rate, congelation according to the mixture rate of the setting accelerator, specific gravity, compression intensity, and bending intensity as experiment factors.

• Journal of the Korean Wood Science and Technology
• /
• 제43권2호
• /
• pp.177-185
• /
• 2015

The goal of this study is to evaluate the limitation of ASTM D 198 bending and ASTM D 3044 in determination of elastic modulus and shear modulus. Different material properties and span to depth ratios were used to analyze the effects of material property and testing conditions. The ratio of true elastic modulus to apparent elastic modulus evaluated from ASTM D 198 bending sharply decreased with increment of span to depth ratio. Shear modulus evaluated from ASTM D 198 bending decreased with increment of depth, whereas shear modulus evaluated from ASTM D 3044 was hardly influenced by increment of depth. Poisson's ratio influenced shear modulus from ASTM D 198 bending but did not influence shear modulus from ASTM D 3044. Different shearing factor was obtained for different depths of beams to correct shear modulus obtained from ASTM D 198 bending equivalent to shear modulus from theory of elasticity. Equivalent shear modulus of materials could be obtained by applying different shearing factors associated with beam depth for ASTM D 198 bending and correction factor for ASTM D 3044.

• Journal of the Korean Wood Science and Technology
• /
• 제26권1호
• /
• pp.70-75
• /
• 1998

In this paper, the relationships between volumetric mixing ratio of rubber chip and physical and mechanical properties of wood/rubber composite panel was examined in order to investigate the mixture characteristics of wood and rubber chip. Because of the specific gravity of rubber differed from wood chip, physical properties of wood/rubber composite panel was shown very different values by mixing rate of chip element. Specific gravity in air-dry of composite panel was increased rapidly as volumetric percent of rubber chip was increased. Moisture content of composite panel was decreased as volumetric percent of rubber chip element was increased. This results was considered that wood weight is light and porosity material for moisture absorption. Compressive strength and modulus of rupture in bending test were decreased as volumetric percent of rubber chip increased. By mixing ratio control of chip elements, various wood/rubber composite panel can be applicable to every interior materials such as subfloor, playground, and exterior materials such as road blocks for recreational facilities in garden and forest and city parks.

• 한국화재소방학회논문지
• /
• 제15권3호
• /
• pp.7-13
• /
• 2001

본 연구는 고분자재료 중 방염미처리된 합판, 방염처리된 합판, 경질PVC, 경질우레탄폼의 연소가스 독성평가를 위하여 열분해 온도 $600^{\circ}c$, $800^{\circ}c$, $1000^{\circ}c$에 따라 발생되는 연소가스를 가스텍(GASTEC) 가스검지관(Colorimetric gas detector tubes)을 이용하여 조사하였다. 연구결과 고분자재료의 연소시 발생되는 연소가스에 인간이 30달 동안 노출될 경우 사망에 이르는 독성지수를 갖고 있었으며, 열분해 온도 $800^{\circ}c$에서 독성지수는 경질 PVC가 31.94로 가장 높았다. 또한 열분해 온도에 관계없이 공통적으로 발생되는 연소가스는 이산화탄소($CO_2$)와 일산화탄소(CO)로. 나타났으며, 동일재료라도 열분해 온도에 따라 독성지수(T.I)는 차이가 있었다.

• 한국가구학회지
• /
• 제21권5호
• /
• pp.403-412
• /
• 2010

Puzzles of various types were made of wood. Children aged 3 to 5 were play directly into a wooden puzzle, then, mainly in adults, the survey was conducted. Comparisons of affinity for the children, teachers, parents, survey were compared with the rating. As a result, the preferred material of the puzzle was in the timber. The type of puzzle children, teachers and parents preferred picture puzzle. For colors, teachers and parents of the puzzle as unpainted wood was preferred. In addition, the favorite play was the difference in difficulty and number puzzles. Therefore, the preference for children and adults aware of the puzzle with a big difference has been clearly identified.

• 한국산업융합학회 논문집
• /
• 제2권2호
• /
• pp.139-146
• /
• 1999

Combustion Characteristics of the wood chips(balsa chips) were experimental studied as fundamental investigation of the thermal recycle system of the urban dust. The urban dust contains plastics vegetable and lot of wood material. Then, a wood was chosen as an example of the component of urban dust. A small wood chip was burned in a electric furnace and mass reduction rate during volatile and combustion states were recorded by the micro-electric balance and the combustion flame shape took a photograph by video camera at the mass of wood chips and ambient temperature in the furance. Ignition delay took the minimum value when the mass of the test chip was 0.3g. When a mass of the test chip was smaller then 0.001g, combustion with flame did not burnt.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 추계 학술논문 발표대회
• /
• pp.171-172
• /
• 2017

There is some recognition that Decoration Wood-based Flooring Board in Korea is a material that inhibits the heat transfer from the substrate to the room. There is a lack of substantial research literature on the surface heat transfer and condition of Decoration Wood-based Flooring Board, which is insufficient to deal with false perceptions. In this study, the purpose of this study is to analyze the surface heat transfer characteristics of Decoration Wood-based Flooring Board and to obtain basic data to cope with recognition.

• Journal of the Korean Wood Science and Technology
• /
• 제36권2호
• /
• pp.1-8
• /
• 2008

This study was performed to evaluate the burning characteristics of wood-based materials and the effect of surface treatment of fire retardant using cone calorimeter. Four types of wood-based materials, such as Plywood, Oriented Strand Board (OSB), Particle Board (PB) and Medium Density Fiberboard (MDF), were tested at a constant heat flux of $50kW/m^2$ to investigate the time to ignition, mass loss rate, heat release rate, effective heat of combustion, etc. In addition, each type of wood-based material was tested at the same heat flux after fire retardant treatment on the surface to evaluate the effect of this treatment on the burning characteristics. The surface treatment of fire retardant, by the amount of $110g/m^2$, delayed the time to ignition almost twice. However, it was indicated that heat release rate, mass loss rate, and effective heat of combustion were not significantly affected by fire retardants treatment for all types of wood-based materials.

• Journal of the Korean Wood Science and Technology
• /
• 제41권4호
• /
• pp.293-301
• /
• 2013

본 연구에서는 수분 흡착효과가 있다고 알려진 커피박을 첨가하여 중밀도섬유판을 제조한 다음 물성과 강도특성을 조사하여 커피박의 중밀도섬유판 원료로써의 가능성을 확인하고자 하였다. 커피박은 주로 인스턴트커피 제조 시 많이 발생하는 찌꺼기인데 가수분해된 것을 전건무게 기준 3, 6, 9% 수준에서 목섬유와 혼합해 중밀도섬유판을 제조하였으며, 이 때 사용한 접착제는 요소수지접착제였다. 커피박과 목섬유를 섞은 중밀도섬유판에 대해 물성과 강도 특성 및 포름알데히드 방산량을 측정하였다. 커피박과 목섬유를 무작위로 섞어 제조한 중밀도섬유판의 휨강도와 박리강도는 모두 KS 기준보다 높게 나타났으며 커피박을 층으로 구성한 적층 성형구조 경우에는 모두 기준에 미달하였다. 제조된 중밀도섬유판의 흡수 두께팽창률은 시판용 중밀도섬유판보다 낮아 물리적 특성 면에서 현저히 개선됨을 보여주었다. 포름알데히드 방산량은 시판용 중밀도섬유판과 유사한 것으로 나타났으며 모두 KS 기준상의 $E_1$급에 부합하였다. 이런 결과는 커피박이 친환경 중밀도섬유판 제조 시 원재료로 활용될 수 있음을 보여주고 있으며 중밀도섬유판의 성능 향상을 위해서는 접착제와 커피박 간의 상호 접착성 및 커피박의 흡착성능 향상을 위한 전환방법에 대한 추가 연구가 요구된다.

• Journal of the Korean Wood Science and Technology
• /
• 제51권1호
• /
• pp.1-13
• /
• 2023

Sengon (Falcataria moluccana Miq.) tree offers a wood of low quality and durability owing to its low density and thin cell walls. This study aimed to improve the properties of sengon wood by making the wood magnetic, producing new functions, and characterizing magnetic sengon wood. Each wood sample was treated using one of the following impregnation solutions: Untreated, 7.5% nano magnetite-furfuryl alcohol (Fe₃O₄-FA), 10% nano Fe₃O₄-FA, and 12.5% nano Fe₃O₄-FA. The impregnation process began with vacuum treatment at 0.5 bar for 2 h, followed by applying a pressure of 1 bar for 2 h. The samples were then tested for dimensional stability and density and characterized using scanning electron microscopy and energy-dispersive X-ray spectroscopy (SEM-EDX), Fourier transform infrared spectrometry (FTIR), X-ray diffraction (XRD) analysis, and vibrating sample magnetometry (VSM) analysis. The results showed that the Fe₃O₄-FA impregnation treatment considerable affected the dimensional stability, measured in terms of weight percent gain, anti-swelling efficiency, water uptake, and bulking effect, as well as the density of sengon wood. Changes in wood morphology were detected by the presence of Fe deposits in the cell walls and cell cavities of the wood using SEM-EDX analysis. XRD and FTIR analyses showed the appearance of magnetite peaks in the diffractogram and Fe-O functional groups. Based on the VSM analysis, treated sengon wood is classified as a superparamagnetic material with soft magnetic properties. Overall, 10% Fe₃O₄-FA treatment led to the highest increase in dimensional stability and density of sengon wood.