References
- American Society for Testing of Materials. 1997. Standard test method for heat and visible smoke release rate for materials and products using an oxygen consumption calorimeter, ASTM E 1354, USA.
- Babrauskas, V. 2003. Ignition Handbook, Fire Science Publishers, Issaquah, WA, pp. 315-320, 833-847.
- Babrauskas V. and W. J. Parker. 1987. Ignitability measurements with the cone calorimeter, Fire and Materials, 11(1): 21-43.
- Bock, H. M. and E. Klement. 1999. Ignitability test for building materials: Influence of fuel gases and the design of the burner's flame stabilizer on test results. Fire and Materials, 23: 201-207. https://doi.org/10.1002/(SICI)1099-1018(199909/10)23:5<201::AID-FAM682>3.0.CO;2-6
- Drysdale, D. 1985. An introduction to fire dynamics. John Wiley and Sons, USA, pp. 265-277.
- Fangrat, J., Y. Hasemi, M. Yoshida, and T. Hirata. 1996. Surface temperature at ignition of wooden based slabs. Fire Safety Journal, 27: 249-259. https://doi.org/10.1016/S0379-7112(96)00046-X
- Gallina, G., E. Bravin, C. Badalucco, G. Audisio, M. Armanini, A. De Chirico, and F. Provasoli. 1998. Application of cone calorimeter for the assessment of class of flame retardants for polypropylene. Fire and Materials, 22: 15-18. https://doi.org/10.1002/(SICI)1099-1018(199801/02)22:1<15::AID-FAM626>3.0.CO;2-3
- International Organization for Standardization. 2002. Reaction to fire tests-Heat release, smoke production and mass loss rate- Part 1 : Heat release rate (Cone calorimeter method), ISO 560. Switzerland.
- KSA. 2000. Testing method for incombustibility of thin materials for buildings. KS F 2819.
- Lattimer, B. Y. and J. J. Beitel. 1998. Evaluation of heat release rate equations used in standard test methods. Fire and Materials, 22: 167-173. https://doi.org/10.1002/(SICI)1099-1018(1998070)22:4<167::AID-FAM649>3.0.CO;2-M
- National Fire Protection Association. 2004. Standard method of test for heat and visible smoke release rates for materials and products using an oxygen consumption calorimeter, NFPA 271. USA.
- Rhodes, B. T. and J. G. Quintiere. 1996. Burning rate and flame heat flux for PMMA in a cone calorimeter. Fire Safety Journal, 26: 221-240. https://doi.org/10.1016/S0379-7112(96)00025-2
- Silcock, G. W. H. and T. J. Shields. 1995. A protocol for analysis of time-to-ignition data from bench scale tests. Fire Safety Journal, 24: 75-95. https://doi.org/10.1016/0379-7112(95)00003-C