• 제목/요약/키워드: Woo mode

검색결과 1,661건 처리시간 0.03초

유도전동기 센서리스 벡터제어를 위한 고피나스 자속관측기의 P/PI 모드 전환 (The P/PI Mode Switching Method of Gopinath Flux Observer for Sensorless Vector Control of Induction Motors)

  • 강명규;최종우
    • 전기학회논문지
    • /
    • 제66권12호
    • /
    • pp.1732-1739
    • /
    • 2017
  • This paper presents a sensorless vector control algorithm of closed loop Gopinath flux observer to enhance the robustness at low speed by switching P/PI mode. Closed loop Gopinath flux observer has the problem in sensorless vector control of induction motor at low speed. This paper solves the problem using the characteristic function of closed loop Gopinath flux observer. P mode shows better performance than PI mode under the cut-off frequency of observer. But P mode always has a flux error due to DC offset, so this paper combines P mode and PI mode. This algorithm shows good performance over wide speed range. The performance has been confirmed through computer simulations using MATLAB SIMULINK and experiments.

600kW급 용융탄산염 연료전지 발전시스템용 EBOP 제어시스템 (Control System of 600kW EBOP for Molten Carbonate Fuel Cell Generation System)

  • 황태식;정우택;양병훈;김광섭;권병기;최창호
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2008년도 하계학술대회 논문집
    • /
    • pp.18-20
    • /
    • 2008
  • An electrical balance of plant(EBOP) of a 600kW molten carbonate fuelcell (MCFC) has to transit from grid-connected(GC) mode to grid-independent(GI) mode when a grid is in a fault conditions. A minimum transition time is limited by four cycle for a 600kW MCFC to ride through a grid fault. In this paper, we propose a control algorithm of a 600kW EBOP for a MCFC system. The EBOP has three operation modes, i.e., GC mode, GI mode, and grid-synchronized(GS) mode. The EBOP controls output currents in a GC mode and regulates output voltages in GI or GS mode. GS mode is defined as an interface between GC mode and GI mode to make a mode transition smooth, i.e., limitation of inrush currents, regulation of output voltages within ANSI standard. Simulations and experiments carried out to verify the effectiveness of the proposed control algorithm.

  • PDF

Stability analyses of dual porosity soil slope

  • Satyanaga, Alfrendo;Moon, Sung-Woo;Kim, Jong R.
    • Geomechanics and Engineering
    • /
    • 제28권1호
    • /
    • pp.77-87
    • /
    • 2022
  • Many geotechnical analyses require the investigation of water flow within partially saturated soil zone to incorporate the effect of climatic conditions. It is widely understood that the hydraulic properties of the partially saturated soil should be included in the transient seepage analyses. However, the characteristics of dual porosity soils with dual-mode water retention curve are normally modelled using single-mode mathematical equation for simplification of the analysis. In reality, the rainwater flow can be affected significantly by the dual-mode hydraulic properties of the soil. This paper presents the variations of safety factor for dual porosity soil slope with dual-mode water retention curve and dual-mode unsaturated permeability. This paper includes the development of the new dual-mode unsaturated permeability to represent the characteristics of soil with the dual-mode water retention curve. The finite element analyses were conducted to examine the role of dual-mode water retention curve and dual-mode unsaturated permeability on the variations of safety factor under rainfall loading. The results indicate that the safety factor variations of dual porosity soil slope modelled using the dual-mode water retention curve and the unsaturated permeability equation are lower than those of dual porosity slope modelled using single-mode water retention curve and unsaturated permeability equations.

Optimization of Ti-indiffused LiNbO3Optical Waveguide for Fiber Coupling

  • Lee, Han-Young;Yang, Woo-Seok;Kim, Woo-Kyung
    • Journal of the Optical Society of Korea
    • /
    • 제8권2호
    • /
    • pp.90-95
    • /
    • 2004
  • The structure of Ti:LiNbO$_3$optical waveguide with a mode size far different from that of single mode optical fiber has been optimized by tapering the waveguide ends. This work was focused on determining the optimized sets of parameters for the fabrication of low-loss Ti indiffused optical waveguides in LiNbO$_3$. Numerical and analytical modeling were applied to simulate the guiding quality and to determine the mode sizes. Based on these modeling results, new waveguide structures with tapered ends have been defined, fabricated and characterized in the respect of the coupling of fiber to Ti-indiffused LiNbO$_3$waveguide.

양의 액정을 이용한 Fringe Field Switching mode의 전기-광학 특성 연구 (Study on electro-optic characteristics of FFS mode using a positive LC)

  • 우창우;하경수;이승희
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2010년도 하계학술대회 논문집
    • /
    • pp.171-171
    • /
    • 2010
  • Electro-optic characteristics of liquid crystal display using fringe field switching(FFS) device depend on many parameters such as cell retardation, electrode structure, rubbing angle, cell gap and dielectric anisotropy. In this paper, the light efficiency of FFS mode will be analyzed to confirm the electro-optic characteristics according to positive dielectric anisotropy such as transmittance, operating voltage and response time.

  • PDF

승압인덕턴스 분산형 PWM 정류기 (Boosting Inductor Distribution Type PWM Rectifier)

  • 이무영;김우현;마진석;임성운;권우현
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1998년도 하계학술대회 논문집 F
    • /
    • pp.1940-1943
    • /
    • 1998
  • A new PWM rectifier which offers a unity power factor is proposed. The circuit has same inductance as the conventional boosting type PWM rectifier in powering mode, but the inductance is splitted to 2 part in freewheeling mode. So the period of freewheeling mode is shorter than that of conventional boosting type PWM rectifier, and discontinuous input current is obtained in wide duty range. Therefore the proposed PWM rectifier accomplishs a unity power factor in wide range of duty ratio and boosting factor. And the conventional boosting type PWM rectifier has poor power factor near the unity boosting ratio, the proposed PWM rectifier improves this problem. The mathmatical analysis are presented and experimental results are given.

  • PDF

수치해석을 이용한 22.9kV급 Cable 권선형 변압기의 진동모드 분석 (A Vibration Mode Analysis of the Cable-Type Winding of 22.9kV Power Transfomer by Using A Numerical Method)

  • 하정우;우성현;신판석;이진희
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2007년도 제38회 하계학술대회
    • /
    • pp.91-92
    • /
    • 2007
  • 본 연구에서는 전력계통에서 발생되는 surge나 고장전류에 의해서 변압기의 고압측 코일에 유도되는 전자력의 크기를 유한요소 전자계해석 프로그램(FLUX2D)의 축대칭FEM을 이용하여 해석하였다. 1MVA, 22900/220(V) 단상 외철형 Cable형 변압기의 권선의 각방향의 전자력을 분석하고, 변압기 권선의 고유진동mode를 Transfer Matrix Method를 이용하여 Cable형권선의 고유진동주파수를 파악하고 ANSYS와 비교하였다. 변압기 권선의 전자력과 진동mode 분석결과는 변압기의 절연설계 및 단락기계력에 대한 프레임 구조 설계를 위한 자료로 활용될 수 있다.

  • PDF

Linux kernel mode에서의 GPGPU 지원 (Supporting GPGPU in Linux kernel mode)

  • 안우근;이신형;유혁
    • 한국정보과학회:학술대회논문집
    • /
    • 한국정보과학회 2012년도 한국컴퓨터종합학술대회논문집 Vol.39 No.1(A)
    • /
    • pp.161-163
    • /
    • 2012
  • 전통적으로 단순 그래픽 연산에만 사용되던 GPU는 연산 속도의 증가와 고수준의 언어 지원을 통해서 일반적인 용도로도 사용 가능한 GPGPU기술로 발전했다. GPGPU는 병렬 처리 능력과 속도 개선을 목적으로 다방면에 걸쳐 사용되고 있는데, 기본적으로 Linux user mode에서의 사용만 가능하며 kernel mode에서의 사용은 지원되지 않는다. Linux kernel 내부에서도 GPGPU 사용이 가능해진다면, User application 뿐만 아니라 Linux kernel의 성능 개선에도 GPGPU를 사용할 수 있을 것이다. 우리는 Linux kernel의 system call과 user mode의 mediator process를 사용한 Linux kernel mode에서의 GPGPU 사용법을 제시하고, 향후 성능 개선을 위한 기준점을 제공한다.

버스안내정보시스템(BIS) 통신방식 도입에 관한 연구 (A Study for Communication Mode of Bus Information System)

  • 이영우
    • 한국산업융합학회 논문집
    • /
    • 제10권4호
    • /
    • pp.241-248
    • /
    • 2007
  • It is recently trend that local government which introduce the BIS is increasing steadily. Communication is inevitably necessary to offer a data of a collected bus position to transportation center and supply construed information. Until now, most BIS connection research is actively in data of collecting, processing, offer but Research is Relatively insufficient on communication mode to connect it. Therefore, this study is achieving applicable communication mode on BIS of present common use inning that communication mode. Study resulting, characteristic of BIS communication mode is analyzed that send-receive of short packet data happens frequently and It is inevitably necessary to synthetically analyze economical side, authoritativeness side of communication, introducing communication mode.

  • PDF