DOI QR코드

DOI QR Code

Optimization of Ti-indiffused LiNbO3Optical Waveguide for Fiber Coupling

  • Lee, Han-Young (Optical Telecommunication Research Center, Korea Electronics Technology Institute) ;
  • Yang, Woo-Seok (Optical Telecommunication Research Center, Korea Electronics Technology Institut) ;
  • Kim, Woo-Kyung (Optical Telecommunication Research Center, Korea Electronics Technology Institute)
  • Received : 2003.12.11
  • Published : 2004.06.01

Abstract

The structure of Ti:LiNbO$_3$optical waveguide with a mode size far different from that of single mode optical fiber has been optimized by tapering the waveguide ends. This work was focused on determining the optimized sets of parameters for the fabrication of low-loss Ti indiffused optical waveguides in LiNbO$_3$. Numerical and analytical modeling were applied to simulate the guiding quality and to determine the mode sizes. Based on these modeling results, new waveguide structures with tapered ends have been defined, fabricated and characterized in the respect of the coupling of fiber to Ti-indiffused LiNbO$_3$waveguide.

Keywords

References

  1. R C. Alfemess, 'Guided-wave devices for optical communication,' IEEE J. Quantum Electron., vol. 17, no. 6, pp. 946-959, 1981 https://doi.org/10.1109/JQE.1981.1071209
  2. S. K. Korotky, W. J. Minford, L. L. Buhl, M. D. Divino, and R. C. Alferness, 'Mode Size and Method for Estimating the Propagation Constant of Single- Mode $Ti:LiNb0_3$ Strip Waveguides,' IEEE Trans. Microwave Theory and Tech., vol. 82, no. 10, pp. 1784-1789, 1982 https://doi.org/10.1109/TMTT.1982.1131321
  3. R. C. Alferness, V. R. Ramaswamy, S. K. Korotky, M. D. Divino, and L. L. Buhl, 'Efficient Single-Mode Fiber to Titanium Diffused Lithium Niobate Waveguide Coupling for Lambda = $1.32\;{\mu}m$,' IEEE Trans. Microwave Theory and Tech., vol. 82, no. 10, pp. 1795-1801, 1982 https://doi.org/10.1109/TMTT.1982.1131323
  4. O. G. Ramer, C. Nelson, and C. Mohr, 'Experimental integrated optic circuit losses and fiber pigtailing of chips,' IEEE J. Quantum Electro., vol. 17, no. 6, pp. 970-976, 1981 https://doi.org/10.1109/JQE.1981.1071212
  5. C. H. Bulmer, S. K. Sheem, R. P. Moeller, and W. S. Burns, 'High-efficiency flip-chip coupling between single-mode fibers and $LiNb0_3$ channel waveguides,' Appl. Phys. Left., vol. 37, no. 4, pp. 351-353, 1981 https://doi.org/10.1063/1.91944
  6. M. Fukuma, J. Node, and H. Iwasaki, 'Optical properties in titanium-diffused $LiNbO_3$ strip waveguides,' J. Appl. Phys., vol. 49, no. 7, pp. 3693-3698, 1978 https://doi.org/10.1063/1.325409
  7. Y. Hibino, "Recent advances in high-density and large-scale AWG multi/demultiplexers with higher index-contrast silic-based PLCs," IEEE J. Selected Topics in Quantum. Electronics., vol. 8, no. 6, pp. 1090-1101, 2002. https://doi.org/10.1109/JSTQE.2002.805965
  8. T. Shoji, T. Tsuchizawa, T. Watanabe, K. Yamada, and H. Morita, "Low loss mode size converter from 0.3 ${\mu}m$ square Si wire waveguides to single mode fibres," Electron Left., vol. 38, no. 25, pp. 1669-1670, 2002. https://doi.org/10.1049/el:20021185
  9. M. Fritze, J. Knecht, C. Bozler, C. Keast, J. Fijol, S. Jacobson, P. Keating, J. LeBlanc, E. Fike, B. Kessler, M. Frish, and C. Manolatou, "3D mode converters for SOl integrated optics," 2002 IEEE Int. SOl Conf., 10/02. https://doi.org/10.1109/SOI.2002.1044461
  10. E. Strake, G. P Bava, and I. Montrosset, "Guided modes of $Ti:LiNbO_3$ channel waveguides: a novel quasi-analytical technique in comparison with the scalar finite-element method," J. Lightwave Technol., vol. 6, no. 6, pp. 1126-1135, 1988. https://doi.org/10.1109/50.4105
  11. S. K. Korotky, W. J. Minford, L. L. Buhl, M. D. Divino, and R. C. Alferness, "Mode size and method for estimating the propagation constant of single-mode $Ti:LiNbO_3$ strip waveguides," IEEE 1. Quantum Electron., vol. 82. no. 10, pp. 1796-1801, 1982. https://doi.org/10.1109/JQE.1982.1071422
  12. R. Regener and W. Sohler, "Loss in low-finesse LiNbO3 optical waveguide resonators," Appl. Phys. B, vol. 36, pp. 143-145, 1985. https://doi.org/10.1007/BF00691779

Cited by

  1. Fabrication and Characteristics of Plastic Optical Fiber Directional Couplers vol.9, pp.3, 2005, https://doi.org/10.3807/JOSK.2005.9.3.099