• Title/Summary/Keyword: Withdrawal Depth

Search Result 44, Processing Time 0.022 seconds

Inflow Patterns Around a Water Intake Tower for Selective Withdrawal Depth (선택취수 수심에 따른 취수탑 유입유동 특성)

  • Cho, Yong;Kim, Yong-Yeol
    • The KSFM Journal of Fluid Machinery
    • /
    • v.13 no.6
    • /
    • pp.63-70
    • /
    • 2010
  • Shallow water withdrawal systems have been replaced with a selected withdrawal system to keep stable raw water quality in spite of occurrence of algae and muddy inflow. Before reconstruction of the water intake tower in Yongdam reservoir supplying water to Gosan water treatment facility, we have predicted flow patterns of inflowing water into the water intake tower for various withdrawal conditions. It has been predicted that the water in the withdrawal layer is significantly inflowed from the front with fast velocity into the water intake tower irrespective of withdrawal depth, while the water away from the withdrawal layer is withdrawed a little from the side with slow velocity.

Predicting the Withdrawal Load of Wood Screws in Domestic Wood by Screw Diameter, Depth of Penetration and Specific Gravity of Wood (국내산 목재에 대한 나사못 직경, 관입길이 및 목재비중에 따른 나사못 유지력 예측)

  • Cha, Jae-Kyung
    • Journal of the Korean Wood Science and Technology
    • /
    • v.39 no.3
    • /
    • pp.252-257
    • /
    • 2011
  • Tests were carried out on domestic wood samples to modify the formula which had previously been developed to predict the withdrawal strength of screw on the face of lumber. Screw sizes were No. 6, 8 and 10 used in this study. Predicted equations were fitted to the results of different length of No. 8 wood screw. The withdrawal strength of screws was enabled to predicted as a function of screw diameter, depth of penetration, and specific gravity of wood. Predicted equation was under-predicted the withdrawal strength of 25 and 30 mm length of screw within 5% and over-predicted withdrawal strength of 18 and 38 mm length of screw.

Modeling the Effect of Intake Depth on the Thermal Stratification and Outflow Water Temperature of Hapcheon Reservoir (취수 수심이 합천호의 수온성층과 방류 수온에 미치는 영향 모델링)

  • Sun-A Chong;Hye-Ji Kim;Hye-Suk Yi
    • Journal of Environmental Impact Assessment
    • /
    • v.32 no.6
    • /
    • pp.473-487
    • /
    • 2023
  • Korea's multi-purpose dams, which were constructed in the 1970s and 1980s, have a single outlet located near the bottom for hydropower generation. Problems such as freezing damage to crops due to cold water discharge and an increase the foggy days have been raised downstream of some dams. In this study, we analyzed the effect of water intake depth on the reservoir's water temperature stratification structure and outflow temperature targeting Hapcheon Reservoir, where hypolimnetic withdrawal is drawn via a fixed depth outlet. Using AEM3D, a three-dimensional hydrodynamic water quality model, the vertical water temperature distribution of Hapcheon Reservoir was reproduced and the seasonal water temperature stratification structure was analyzed. Simulation periods were wet and dry year to compare and analyze changes in water temperature stratification according to hydrological conditions. In addition, by applying the intake depth change scenario, the effect of water intake depth on the thermal structure was analyzed. As a result of the simulation, it was analyzed that if the hypolimnetic withdrawal is changed to epilimnetic withdrawal, the formation location of the thermocline will decrease by 6.5 m in the wet year and 6.8 m in the dry year, resulting in a shallower water depth. Additionally, the water stability indices, Schmidt Stability Index (SSI) and Buoyancy frequency (N2), were found to increase, resulting in an increase in thermal stratification strength. Changing higher withdrawal elevations, the annual average discharge water temperature increases by 3.5℃ in the wet year and by 5.0℃ in the dry year, which reduces the influence of the downstream river. However, the volume of the low-water temperature layer and the strength of the water temperature stratification within the lake increase, so the water intake depth is a major factor in dam operation for future water quality management.

Simulation of Water Temperature in the Downstream According to Withdrawal Types of Dam using EFDC Model (댐 방류형태가 하류 하천 수온변화에 미치는 영향 예측)

  • Park, Jae-Chung;Yoon, Jin-Hyuk;Jung, Yong-Moon;Son, Ji-Yeon;Song, Young-Il
    • Journal of Environmental Impact Assessment
    • /
    • v.21 no.5
    • /
    • pp.715-724
    • /
    • 2012
  • In this study, we simulated water temperature in the downstream according to withdrawal types of dam using EFDC model. Three scenarios were assumed as water was released from the surface layer, the middle layer, and the bottom layer at intervals of 10m depth. In case of the surface layer withdrawal, the water temperature rose from March and lowered gradually after it reached a peak in August. The middle and the bottom layers effluence temperatures were lower than the surface layer temperature by maximum $15.9^{\circ}C$(in July), but after September, temperature inversion appeared. It was advantageous for the surface layer withdrawal to decrease cold damage and fog in downstream area and was possible to the middle and the bottom layers withdrawal from August to September. However, the reliability of model should be improved by accumulating the real-time information of water temperature.

Experimental Study on the Velocity Structure of 2-D Density Current Induced by Selective Withdrawal (선택취수에 의한 2차원 밀도류의 흐름특성에 관한 실험적 연구)

  • Lyu, Siwan;Kim, Young Do;Cho, Gilje;Kwon, Jae Hyun;Lee, Nam Joo
    • Journal of Korean Society of Water and Wastewater
    • /
    • v.23 no.6
    • /
    • pp.825-832
    • /
    • 2009
  • A series of laboratory experiments has been performed to investigate the flow characteristics of 2-dimensional density currents induced by selective withdrawal, which is commonly suggested as a measure for removal of high turbid water from reservoirs. Saltwater has been used to simulate the density stratification over depth and PIV(Particel Image Velocimetry) for observing the velocity structure. Experimental conditions have been established according to Richardson number, which is the dimensionless number that expresses the ratio of potential to kinetic energy. From the experiments, the patterns of longitudinal decay of centerline axial velocity induced by the withdrawal have been distinguished from other experimental cases. The rate of longitudinal decay increase as the Richardson number increases. The variations of volumetric and momentum flux along the longitudinal axis have also shown to be dependent on Richardson number.

Predicting the Screw Withdrawal Load of Commercial Particleboard Manufactured in Korea (국내에서 생산된 파티클보드의 나사못 유지력 예측)

  • Cha, Jae Kyung
    • Journal of the Korean Wood Science and Technology
    • /
    • v.41 no.6
    • /
    • pp.544-550
    • /
    • 2013
  • Tests were carried out on commercial particleboards manufactured in Korea to evaluate and modify formulas which had previously been developed to predict the holding loads of screw on the face and edge of specimen. Screw sizes were No. 6, 8 and 10 used in this study. The withdrawal loads of screws were developed to predict as a function of screw diameter, depth of penetration, specific gravity and IB of particleboard. Predicted equations were fitted to the test results of different length of No. 8 screws. Results of tests indicate that IB is a better predictor of holding loads on the face of particleboard than SG. On the other hand, SG is a good indicator of holding load on the edge of particleboard.

Effect of the Withdrawal Strength of Wood Screws in Domestic Wood by Shear Strength with Different Growth Ring Orientation (국내산 목재의 연륜경사에 따른 전단강도 및 나사못 유지력 영향)

  • Cha, Jae Kyung
    • Journal of the Korean Wood Science and Technology
    • /
    • v.40 no.6
    • /
    • pp.363-369
    • /
    • 2012
  • Shear tests parallel to the grain were conducted on domestic wood samples with different growth ring orientations. Shear strength was dependent on the angles between the direction of growth ring orientation and the applied force. The maximum shear strength showed at the intermediate growth ring orientations. Results of shear tests were also used to modify the formula which had previously been developed to predict the withdrawal strength of screw on the face of lumber. Predicted equations were fitted to the results of previous study with different length of No. 8 screw. Predicted equation was under-predicted the withdrawal strength of 25 and 30 mm length of screw within 8% and over-predicted withdrawal strength of 18 and 38 mm length of screw. A little differences between the predicted by shear strength with different growth ring orientation and observed values was existed.

Withdrawal of Life-Sustaining Treatment from Children: Experiences of Nurses Caring for the Children (간호사의 연명치료중단아동 돌봄경험)

  • Park, So Yeon;Ju, Hyeon Ok;Lee, Ga Eon
    • Child Health Nursing Research
    • /
    • v.23 no.3
    • /
    • pp.364-374
    • /
    • 2017
  • Purpose: The purpose of this study was to describe feelings and actions of nurses following withdrawal of life-sustaining treatment from children being cared for by the nurses. Methods: Data were collected by in-depth interviews with 7 nurses from different hospitals where children receiving nursing care had life-sustaining treatment withdrawn. The interviews were conducted from August 2016 to February 2017 when all data were saturated. Interviews lasted 30~90 minutes and were conducted 2~3 times per participant. Data were analyzed using Giorgi's phenomenological research methodology. Results: The following factors constituted experiences of nurses working in pediatric wards when life-sustaining treatment was withdrawn from children: "agony and conflict in the aspects of care", "heavy mind and regret for exhausting care", "intentionally avoiding parents' sadness", "comforting sadness in the heart" and "orientation in the role of caring for children undergoing withdrawal of life-sustaining treatment." Conclusion: Findings indicate that support systems and intervention programs need to be developed so that nurses can understand and wisely deal with experiences of withdrawal of life-sustaining treatment from children who receive care from nurses.

The Effect of Nursing Students' Consciousness of Biomedical Ethics, Good Death Recognition, and Self-Esteem on the Attitude toward Withdrawal of Life-Sustaining Treatment (간호대학생의 생명의료윤리 의식, 좋은 죽음 인식, 자아존중감이 연명치료 중단에 대한 태도에 미치는 영향)

  • Choi, Eun Jeong;Jeong, Hye Sun
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.19 no.5
    • /
    • pp.275-284
    • /
    • 2018
  • This study was a descriptive study to investigate the effects of nursing students' consciousness of biomedical ethics, good death recognition, and self-esteem on attitudes toward withdrawal of life-sustaining treatment. The subjects of this study were 204 nursing students attending university. The data were collected from October 24 to October 31, 2017 and analyzed using the SPSS Win. 22.0 program. Attitudes toward withdrawal of life-sustaining treatment scored $2.97{\pm}0.29$ out of 4, $3.01{\pm}0.31$ for biomedical ethics, $3.24{\pm}0.38$ for good death recognition and $3.23{\pm}0.41$ for self-esteem. There was a significant positive correlation between attitudes toward withdrawal of life-sustaining treatment and good death recognition, and there was a significant positive correlation between attitudes toward withdrawal of life-sustaining treatment and self-esteem. As a result of multiple regression analysis, it was found that good death perception affected nursing students' attitudes toward the withdrawal of life-sustaining treatment. In other words, elevated perception of good death was associated with more positives attitudes toward withdrawal of life-sustaining treatment. Based on the above results, it is necessary to develop a systematic education program for nursing college students. In addition, this researcher proposes an in-depth study to explore the variables that influence nursing students' attitudes toward withdrawal of life-sustaining treatment.

Phosphorus Cycle in Three Herb Plant Populations in the Basin of Mt. Geumoh (금오산 분지의 삼종 초본식물개체군의 인의 순경)

  • 류승원
    • Journal of Plant Biology
    • /
    • v.30 no.4
    • /
    • pp.299-309
    • /
    • 1987
  • The seasonal pattern and the annual magnitude of the internal (or biochemical) and plant-soil cycles of phophorus in adjacent three different herb plant populations-Helianthus tuberosus L., Artemisia princeps Pampan and Phalaris anundinacea L.-in an old field of the basin in the Mt. Geumoh were investigated. A lot of the phosphorus demand for the three populations was supplied by the withdrawal from below-ground organ in early growing period, by the absorption from soil in mid-growing period and by the withdrawal from stem in later growing period. But in the A. princeps and P. arundianacea populations, a great deal of phosphorus seemed to be absorbed prior to the first withdrawal. The annual amount of the phosphorus flowing throughthe internal cycle was about 59% of the total hosphorus flow on theorgan level in the H. tuberosus population, 41% in the A. princeps population and 32% in the P. arundinacea population, indicating that the tuber plant had the most developed internal cycle system. The annual amount of phosphorus which took part in the plant-soil cycle in the stand of the three populations was in the range of 4.49-5.65 gPm-2, corresponding to only 3-8% of the extractable phosphorus contained in the soil of 0-20 cm depth. The fact that the H. tuberosus population is higher in the extent fo internal cycle but smaller in the magnitude of plant-soil cycle and lower in the turnover rate of phsophorus than the other two populations suggests that the growth of H. tuberosus population may be less dependent on soil phosphorus availability than those of the other two populations.

  • PDF