• Journal of IKEEE
• /
• v.24 no.2
• /
• pp.468-474
• /
• 2020

This paper describes the hardware implementation of SPECK, a lightweight block cipher algorithm developed for the security of applications with limited resources such as IoT and wireless sensor networks. The block cipher SPECK crypto-core supports 8 block/key sizes, and the internal data-path was designed with 16-bit for small gate counts. The final round key to be used for decryption is pre-generated through the key initialization process and stored with the initial key, enabling the encryption/decryption for consecutive blocks. It was also designed to process round operations and key scheduling independently to increase throughput. The hardware operation of the SPECK crypto-core was validated through FPGA verification, and it was implemented with 1,503 slices on the Virtex-5 FPGA device, and the maximum operating frequency was estimated to be 98 MHz. When it was synthesized with a 180 nm process, the maximum operating frequency was estimated to be 163 MHz, and the estimated throughput was in the range of 154 ~ 238 Mbps depending on the block/key sizes.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.9
• /
• pp.940-946
• /
• 2010

In this paper, we proposed the internal antenna on PCB(Planar Circuit Board) for achieving WWAN(Wireless Wide Area Network) operation in the laptop computer. The proposed antenna has a metal structure instead of printed pattern on PCB to improve the antenna characteristics for GSM850/900 bands. Compared to PCB embedded antenna without metal structure, the proposed antenna occupies similar area of $74{\times}11{\times}0.5\;mm^3$ with before and the bandwidth of the proposed one for GSM850/900 bands is increased 13 MHz than before. Further we confirmed that the proposed antenna has higher radiation gain of -4.45~-2.29 dBi for GSM850/900 bands than PCB embedded antenna without metal structure.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.10
• /
• pp.2321-2330
• /
• 2015

A variety of studies for indoor positioning are now being in progress due to the limit of GPS that becomes obsolete in the room. However, most of them are based on private wireless networks and the situation is difficult to commercialize them since they are expensive in terms of installation and maintenance costs, non-real-time, and not accurate. This paper applies the mark recognition algorithm used in existing augmented reality applications to the indoor vehicle positioning application. It installs floor marks on the ground, performs the perspective transformation on it and decodes the internal data of the mark and, as a result, it obtains an absolute coordinate. Through the geometric analysis, it obtains current position (relative coordinates) of a vehicle away from the mark and the heading direction of the vehicle. The experiment results show that when installing the marks every 5 meter, an error under about 30 cm occurred. In addition, it is also shown that the mark recognition rate is 43.2% of 20 frames per second at the vehicle speed of 20km/h. Thus, it is thought that this idea is commercially valuable.

• Journal of KIISE:Information Networking
• /
• v.33 no.4
• /
• pp.299-309
• /
• 2006

In Mobile ad hoc networks, AODV is one of the famous on-demand routing protocol, which use the routing tables in the nodes if possible, or Route Discovery Process (RDP) is triggered to find a new route. However increasing the traffic of RDP causes dropping of the network performance in the large size of ad hoc networks. In this paper, we propose a novel routing protocol, named as AOZDV (Ad hoc On-demand Zone and Distance-Vector Routing), which enhances the AODV protocol with zone routing. AOZDV creates a Zone with neighbor nodes of the source/destination using traffic and power information, and utilizes Destination-Vector Table for internal routing in the Zone. We show by simulations that AOZDV can reduce the occurrence rate of route fail and RDP caused by route fail compared to existing routing protocols such as DSR and AODV.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.3
• /
• pp.20-26
• /
• 2009

One way to increase public revenue from public parking spaces is by improving the way parking meters gather data. Improved parking meters have evolved that increase car park revenue as well as efficiency in service and operations. It provides parking meters with the capacity to provide real-time information. This information consist primarily of the status of parking spaces (it indicates which expired metered spaces have parked vehicles.) The technology consists of sensors located at meters that report on their condition (i.e. whether it is working or if it is expired). This information is processed by a microprocessor and then sent via an internal wireless modem to the server. This server then processes the information from all the parking meters and sends it to the public institution in charge of them. This system also provides verification of parking permits. For example, disabled people with special license plates can be automatically approved for parking in designated places.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.49 no.7
• /
• pp.30-38
• /
• 2012

This paper presents packet detection, frequency offset estimation architecture and performance analysis for OFDM-based wireless personal area network (WPAN) systems. Packet detection structure is used to find the start point of a packet exactly in WPAN system as the correlation value passes the constant threshold value. The applied autocorrelation structure of the algorithm can be implemented simply compared to conventional packet detection algorithms. The proposed frequency offset estimation architecture is designed for phase rotation process structure, internal bit reduction to reduce hardware size and the frequency offset adjustment block to reduce look-up table size unlike the conventional structure. If the received signal can be compensated by estimated frequency offset through the correction block, it can reduce the impact on the frequency offset. Through the performance result, the proposed structure has lower hardware complexity and gate count compared to the conventional structure. Thus, the proposed structure for OFDM-based WPAN systems can be applied to the initial synchronization process and high-speed low-power WPAN chips.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.7
• /
• pp.778-785
• /
• 2010

The folded monopole antenna for applying mobile communications equipment and wireless devices is presented in this paper. By using the coplanar waveguide feed the operating bandwidth has improved. In addition, each individual resonant elements has occurred different capacitance through asymmetrical left and right ground planes; therefore, the bandwidth has kept and the impedance matching has stabilized. By measurement results, the impedance bandwidth under VSWR< 2.5:1 are $824{\sim}890$ MHz and the $1,500{\sim}2,170$ MHz, also radiation patterns has omni-directional characteristics. The maximum gains of the proposed antenna are 5.52, 0.64, 3.00, 0.94 and 1.85 dBi at 850, 1,575, 1,790, 1,930 and 2,050 MHz respectively. The proposed antenna will be adapted to the internal antenna of the mobile communication devices.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.3
• /
• pp.580-585
• /
• 2009

Real Time Locating Systems (RTLS) are used to track and identify the location of objects in real time using simple, inexpensive tags attached to or embedded in objects and readers that receive the wireless signals from these tags to determine their locations. A tag is powered an internal source such as a battery. The blink frequency of a tag affects the energy efficiency and the locating accuracy of RTLS. The mobility of a tag also affects the locating accuracy. In this paper, we introduce a RTLS tag design which improves the locating accuracy and the power efficiency. We propose an adaptive transmission-rate control algorithm using a motion sensor. By analyzing the signal pattern of the motion sensor, we can build a model to estimate the speed of the motion. Using this model, our algorithm can achieve better locating accuracy and lower power consumption than those of the conventional method. In our experiments, the number of transmission reduced as 40%, keeping similar locating accuracy.

• Journal of Information Technology Services
• /
• v.10 no.1
• /
• pp.105-116
• /
• 2011

With recent spotlight on the, uniquitous computing technology, the need for object of indentification and location infrastructure has increased. Such GPS technolgy must utilize IEEE 802.15.4 Zigbee used for existing wireless sensor network infra as a basice element for user's context-awareness in a uniquitous environement, for effectiveness.Such real-time GPS service is provided in the internal environment where the user would actually are and most high-rise buildlings apply. Underthe assumption, the real-time GPS technology is seperated by each floor, and signals do not get transmitted to other floors, the application on one floor within the high-rise buildling was conducted. This study intends to suggest a floor detection algorithm using IEE 802.15.3/Zigbee's RSSI which supports the accuracy within a couple of meters for the user's the movement between the floors in high-rise buildings in a complex environment. It proposes an floor detection algorithm using IEEE 802.15.4/Zigbee's RSSI which provides accuracy within a radius of few meters for the users movement between the floors for real-time location tracking within high-rise building in a cmoplex environment. Furthermore, for more accurate real-time location tracking, it suggests an algorithm for real-time location tracking using IEEE 802.15.4a/Zigbee's CSS technology based on triangulation. Based on the suggested algorithm, it designs a hybrid real-time location tracking service system in a high-rise buildling and test its functions.

• Journal of Internet of Things and Convergence
• /
• v.2 no.2
• /
• pp.21-26
• /
• 2016

In this paper, it is possible to update the tourist information in real time, on/off-line tour proposes a solution(BBTS) based on a bluetooth beacon can provide tourist information without the need for wireless data network. BBTS consists of a bluetooth based data of the low-power supply system and the beacons and interoperable smart applications. Data supply system consists of the BLE & Beacon Pairing-based / non-pairing data transmission module with integral hardware. Smart application modules that provide indoor location of users information, internal server module and tourist information collection and information guide around comprised of applications. The proposed BBTS is possible that indoor service tourism tourist demand due to utilizing the beacon technology. Outdoor tourist information is designed to be downloaded to the smartphone receives the information received from the beacon APK file to provide services. BBTS system is expected to make a big impact on the smart tourism services industry.