• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.21 no.3
• /
• pp.206-211
• /
• 2011

In this paper, we report a high-precision wireless gap sensor based on a surface acoustic wave (SAW) device. The sensing element is a parallel-plate capacitor whose dimensions are $3{\times}3\;mm^2$, and is attached to the SAW device as an external load. The SAW device, equipped with an RF antenna, serves simultaneously as a signal conditioner and an RF transponder. The center frequency of the SAW device is 450 MHz. The wireless gap sensor prototype exhibits a resolution of 100 nm and a sensing range of $50{\mu}m$. The proposed sensor system can be used for remote, high-precision gap measurement in hard-to-reach environments.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.3C
• /
• pp.233-240
• /
• 2012

Unlike traditional factory environment, in an industrial factory network applied wireless sensor network technologies, all procedures of discovery, identification and verification of devices should be performed in an automatic fashion. To address these challenges, we design a management system using the device registry server that we propose in this paper. In the phase of device discovery, the proposed system utilizes properties of routing protocol running in factories. Also, in the phase of identification and verification, the system uses unique and general information of a device stored within the device registration server. Such a way allows management system to reduce implementation complexity and to easily manage devices in a factory applied with a wireless network consisting of heterogeneous devices.

• Journal of the Korean Society of Industry Convergence
• /
• v.8 no.2
• /
• pp.97-104
• /
• 2005

Usually, propagation attenuation of millimeter wave occurs by rainfall, snowfall, temperature, effect of pressure of air. In 60GHz wave band wireless communication network, temperature change becomes big factor of propagation loss department. Also, temperature change causes disturbance of 60GHz frequency at transceiver. In this study, we used 60GHz transceiver and found propagation loss of wireless path and operating frequency disturbance characteristics. In transceiver that there is no temperature compensated device, operating frequency of TX changed by 60.865GHz at temperature of $-5^{\circ}C$, and appeared by 60.730GHz when is $50^{\circ}C$. Therefore, operating frequency change width by temperature change are about 100MHz, greatly. But, in transceiver that there is temperature compensated device, operating frequency of TX changed by 60.830GHz at temperature of $-5^{\circ}C$, and appeared by 60.710GHz when is $50^{\circ}C$. Therefore, operating frequency change width by temperature change are about 20MHz. According to these result, we constructed between buildings examination wireless site for point to point wireless communication using 60GHz band transceivers who have do temperature compensated device, and investigated data transmission characteristics about ambient temperature change. Therefore, if use transceiver that have temperature compensated device, may overcome the wireless transmission error in 60GHz band wireless communication LAN networks despite of ambient temperature change.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1633-1637
• /
• 2003

Existing input devices for desktop computers are not suitable for wearable computers because they are neither easy to carry nor convenient to use in a mobile working environment. Different input devices for wearable computers must be developed. In this paper, a wireless glove-based input device for wearable computers is proposed. The proposed input device consists of a pair of chording gloves. Its keys are mounted on the fingers and their chording methods are similar to those of a Braille keyboard. RF (Radio Frequency) and IrDA (Infrared Data Association) modules are used to make the proposed input device wireless. Since the Braille representation for numbers and characters is efficient and has been well established for many languages in the world, the proposed input device may be one of good input devices to computers. Furthermore, since the Braille has been used for visually impaired people, the proposed one can be easily used as an input device to computers for them.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.447-448
• /
• 2012

With wireless power transfer the of ECR device the designed with a high-frequency and high frequency AC power to the device that may enter the high-frequency switching inverter to be possible. In this paper, is designed to 2MHz switching frequency by using ECR device capable of 2MHz Class ${\Phi}_2$ inverter was designed as a wireless power transmission.

• ETRI Journal
• /
• v.25 no.3
• /
• pp.203-209
• /
• 2003

This paper reports on our investigation of DC and RF characteristics of p-channel metal oxide semiconductor field effect transistors (pMOSFETs) with a compressively strained $Si_{0.8}Ge_{0.2}$ channel. Because of enhanced hole mobility in the $Si_{0.8}Ge_{0.2}$ buried layer, the $Si_{0.8}Ge_{0.2}$ pMOSFET showed improved DC and RF characteristics. We demonstrate that the 1/f noise in the $Si_{0.8}Ge_{0.2}$ pMOSFET was much lower than that in the all-Si counterpart, regardless of gate-oxide degradation by electrical stress. These results suggest that the $Si_{0.8}Ge_{0.2}$ pMOSFET is suitable for RF applications that require high speed and low 1/f noise.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.447-450
• /
• 2014

In this paper efficient design of wireless tablet system using GalaxyNote device for PC was proposed. The designed portable tablet consists of GalaxyNote device, Stylus Pen, and Bluetooth-to-serial converter. To transmit coordinate information of Stylus Pen on GalaxyNote device to PC, wireless portable tablet uses bluetooth wireless communications. After the custom mouse filter driver divides received coordinate into x-coordinate and y-coordinate, it controls position of mouse pointer using the converted coordinates while Windows application programs are running.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1255-1261
• /
• 2010

An operating information and fault recode of train is very important information for safety driving and maintenance. And these information is increased and need high speed as the number of trains is increased. Wireless LAN or CDMA network is efficient to report more complicated and various information from vehicle to server in control center. Existing wireless transmission system has weakness due to transmission system is separated with TDCS and standalone. At first, standalone system needs space to be installed and cost is increased. And data transmission capacity and speed is limited by complicated structure that transmission system receive data thru serial communication like RS232 and then data transmission system send data to server in control center. This article is study to develop embedded & wireless fault code transmission device to be installed in TDCS to overcome weakness of space and to have more cost effective and simple structure. It is adapted 802.11b/g WiFi for wireless communication and OS is used embedded Linux that can easily implement wireless communication environment and ensure TCP/IP communication’s security. We also implement simple server to test wireless communication between embedded & wireless fault code transmission device and server in control center.

• Journal of Internet Computing and Services
• /
• v.7 no.2
• /
• pp.37-52
• /
• 2006

A mobile device like ceil phone is the necessity of modern people, of ich con be easily connected to a wireless internet through such a mobile device. The demand for a wireless data communication is growing rapidly. However, agencies have not yet completed standardization of a markup language. Due to the development of the Mobile Device, agencies in this field have provided different data formats with each Mobile Device Platform. Traditionally, contents is hand-tailored to suit the target device. A key problem is that the characteristics and capabilities of the mobile device are too diverse to service the most suitable mobile contents. Because of these problems, the need for a re-usable document description language increases. In this paper, we defined Template file that is common data to service mobile devices. We proposed a method that could be an effective wireless web service though design and the implementation of the Call manager & the XSL Generator. In the methodology, when requesting a wireless internet service, a mobile device finds out markup language and a hardware specification of the mobile device through the Call Manager component supports. The XSL Generator component creates the XSL file dynamically that is the most suitable to a device. Finally, contents is serviced to each device by XSLT. It can generate a wireless page more easily by reusing the existing web contents through such course. Therefore, it can save the time and expense for generating a wireless page.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.10
• /
• pp.4662-4677
• /
• 2018

The dynamic opportunistic device-to-device (DO-D2D) network will frequently emerge in the fifth generation (5G) wireless communication due to high-density and fast-moving mobile devices. In order to improve the Quality of Experience (QoE) of users with different computing capacity devices in the DO-D2D network, in this paper, we focus on the study of how to reduce the packets retransmission delay and satisfy heterogeneous devices. To select as many devices as possible to transmit simultaneously without interference, the concurrent transmitters-selecting algorithm is firstly put forward. It jointly considers the number of packets successfully received by each device and the device's connectivity. Then, to satisfy different devices' demands while primarily ensuring the base-layer packets successfully received by all the devices, the layer-cooperation instantly decodable network coding is presented, which is used to select transmission packets combination for each transmitter. Simulation results illustrate that there is an appreciable retransmission delay gain especially in the poor channel quality network compared to the traditional base-station (BS) retransmission algorithm. In addition, our proposed algorithms perform well to satisfy the different demands of users with heterogeneous devices.