• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.175-177
• /
• 2007

This paper is concerned with a performance analysis using a wired/wireless gateway based on DeviceNet. For the performance analysis, the data transmission time between DeviceNet and the wireless devices is investigated and analyzed. The experimental results show the perfom1ance in terms of the polling/COS service time and end-to-end delay.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.7 no.2
• /
• pp.95-101
• /
• 2012

In order to supply emotion service depending on user's emotional change in a mobile environment, various researches have been carried. This paper discusses a protocol for wireless charging and an embedded platform of the mobile emotional sensing device which supports that. Wireless charging process relieves user's vexatious task to charge the emotional sensing device. To support wireless charging, there are one basestation and several mobile devices. Basestation coordinates and controls the devices over wireless communication, as well as supplies energy. For 1:N communication we defines the network whose superframe is classified into four categories: a network join superframe, a charging request superframe, a charging superframe and an inactive superframe. Physical layer provides how to supply energy to the devices and communicate physically. Mobile device is equipped with energy charged circuits, which correspond with the defined energy supplying method, as well as bidirectional communication circuits. Mobile device monitors and analyzes its own battery status, and is able to send a request packet to basestation. Therefore, it can be charged before its battery is exhausted without user's perception.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.23 no.2
• /
• pp.169-179
• /
• 2013

Recently, with rapid advances of mobile devices such as smart phone and wireless networking, a number of services using mobile device based wireless network have been explosively increasing. From the viewpoint of security, because wireless network is more vulnerable than wired network, strong security is required in wireless network. On the contrary, the security for mobile devices has to be efficient due to the restrictions of battery powered mobile device such as low computation, low memory space and high communication cost. Therefore, in this paper, we propose an efficient authentication scheme with mobile devices in wireless network environment. The proposed scheme satisfies security requirements for the service using mobile device and it is suitable in wireless network environment.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.6
• /
• pp.813-821
• /
• 2017

This paper presents the study result on a realization of wireless umbilical device for missile systems. In general, a missile system is connected to a fire control equipment via an umbilical connector to get the electrical power for its internal equipment and communicate with each other. And these connectors inherently have many problems of mis-contact between pin and socket, and mis-separation during missile firing, etc. A wireless umbilical device using LC resonance is devised to solve these problems of the current technology. For hundreds of watts power transmission under the missile system environment of restricted space, we designed and made a prototype of wireless umbilical device. And we tested this wireless umbilical device with an aluminum cylinder having cutout windows which simulate missiles. We realized that the wireless technology can be used as a substitute for the conventional umbilical connectors, and EMI and environment tests should be followed further.

• The Journal of the Korea Contents Association
• /
• v.13 no.5
• /
• pp.19-27
• /
• 2013

This paper implements the standby power control system composed of a master device and slave devices. The standby power is managed by cutting power supply after controlling the relay of a slave device based on the authentication of master device's RFID card. RFID interface and wireless communication module are embedded in a master device, and one master device is linked with many slave devices in wireless. Each slave device executes the operation needed in power control independently. We implements the function of manual power on/off system in a slave device, and the function of user ID enrollment by switch manipulation in a master device. Also this system can communicate bidirectionally in wireless and runs on TinyOS. The result of experiment shows that the user authentication is executed in a master device and this authenticated information is transmitted to a slave device in wireless, and standby power is cutted by controlling the relay of a slave device. Installing this system in a building or an office, we can expect energy saving.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.11 no.1
• /
• pp.19-25
• /
• 2015

In this time, as an industrial society developed to a welfare society, more and more people want their quality of lives upgraded and specially customized service by mass production/mass consumption. And it leads to an increase of requiring service. There're active developments and studies on various IT equipment as the requirement made IT devices used in service. In this paper, we try to design and realize radio paging DID by using smart device to be used as a receiver of a radio pager which is broadly used at face to face service. Firstly, we used MCU to design and implement Wireless Calling Gateway which change radio calling signal of ISM band to smart device. A receiver of wireless caller used original receiver module. Also it used bluetooth module to communicate with smart device. It was possible to have satisfactory communication since radio paging signal converter and smart device were linked in 3M. Secondly, to indicate various paging information delivered from a radio pager, we realized DID application program by using Smart PAD. As a result, we could indicate various information compared to an original receiver which only could indicate letters or numeric data. Secondly, we implemented the DID app for wireless calls that can display a variety of information sent from a wireless pager. Was implemented using the Smart Pad. As a result, it is shown that can display a variety of information than the existing receiver.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.22 no.4
• /
• pp.501-508
• /
• 2019

In this paper, a study on a wireless check-up method of test equipment for captive flight test(CFT) was conducted. For CFT, test equipment is mounted on a POD, and check-up is carried on the test equipment's. For check-up the POD wirelessly, battery, power distribution unit, wireless communication devices were designed within the POD, and a check-up device is designed outside of the POD. Once the external check-up device sends a 'start signal' to the POD, it performs the overall check-up procedures and transmits the 'end signal' to the external check-up device. Detailed check-up results are stored in an internal storage device, and are possible to read from external check-up device if necessary, thereby improving the reliability of the wireless check-up. By implementing and applying these wireless check-up system, the reliability of the check-up was enhanced by dynamical and movable check-up, and safety is guaranteed as the check-up was carried without access to the aircraft.

• ETRI Journal
• /
• v.37 no.4
• /
• pp.707-716
• /
• 2015

The purpose of a localization system is to estimate the coordinates of the geographic location of a mobile device. The accuracy of wireless localization is influenced by nonline-of-sight (NLOS) errors in wireless sensor networks. In this paper, we present an improved time of arrival (TOA)-based localization method for wireless sensor networks. TOA-based localization estimates the geographic location of a mobile device using the distances between a mobile station (MS) and three or more base stations (BSs). However, each of the NLOS errors along a distance measured from an MS (device) to a BS (device) is different because of dissimilar obstacles in the direct signal path between the two devices. To accurately estimate the geographic location of a mobile device in TOA-based localization, we propose an optimized localization method with a BS selection scheme that selects three measured distances that contain a relatively small number of NLOS errors, in this paper. Performance evaluations are presented, and the experimental results are validated through comparisons of various localization methods with the proposed method.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.11
• /
• pp.2015-2021
• /
• 2017

Recently, a lot of attention is fallen to IoT(Internet of Things) for hyper-connected society and the number of unlicensed wireless device has been increasing. Thus, this paper analyzed the impact of unlicensed wireless device on the basis of 802.11ah on licensed LTE user equipment in 900 MHz frequency band for efficient frequency use. As the interference analysis method, Minimum Coupling Loss (MCL) method and Monte Carlo (MC) method were used. In case of one interferer, minimum separation distance between interferer and victim was calculated as about 22 m through the MCL method under the assumption of the worst case. The maximum number of interferer to meet the interference probability of 5% below within a cell radius of the victim was computed as about 3000 by using MC method based on statistical technique. The analysis method and results in this paper are expected to be used for the coexistence between unlicensed wireless device and licensed wireless device.

• Journal of Biomedical Engineering Research
• /
• v.29 no.4
• /
• pp.295-301
• /
• 2008

A wireless 3 channel ECG monitoring system was developed so that it could monitor the health and movement state during subject's daily life. The developed system consists of a wireless biomedical signal acquisition device, a personal healthcare server, and a remote medical server. Three experiments were performed to evaluate the accuracy, reliability and operability, applicability during daily life of the developed device. First, ECG signals were measured using the developed device and commercial reference device during sitting and marking time and compared to verify the accuracy of R-R intervals. Second, the reliable data transmission to remote server was verified on two types of simulated emergency event using patient simulator. Third, during five types of motion in daily life, the accuracy of data transmission to remote server using CDMA network was verified on two types of event occurring. By acquiring and comparing subject's biomedical signal and motion signal, the accuracy, reliability and operability, applicability during daily life of the developed device were verified. In addition, PDA-phone based wireless system enabled subject to be monitored without any constraints. Therefore, the developed system is expected to be applicable for monitoring the aged and chronic diseased people and giving first-aid in emergency.