• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.11
• /
• pp.2526-2533
• /
• 2015

In this paper, a design method for a compact dual-band coplanar waveguide-fed slot antenna using SRR(split-ring resonator) conductor is studied. The SRR conductor is loaded inside a rectangular slot of the proposed antenna for dual-band operation. When the SRR conductor is inserted into the slot, the original rectangular slot is divided into a rectangular loop region and a rectangular slot region, and frequency bands are created by the loop and slot, separately. A prototype of the proposed dual-band slot antenna operating at 2.45 GHz WLAN band and 3.40-5.35 GHz band is fabricated on an FR4 substrate with a dimension of 30 mm by 30 mm. Experiment results show that the antenna has a desired impedance characteristic with a frequency band of 2.38-2.51 GHz and 3.32-5.38 GHz for a voltage standing wave < 2, and measured gain is 1.7 dBi at 2.45 GHz, and it ranges 2.4-3.2 dBi in the second band.

• Journal of radiological science and technology
• /
• v.28 no.2
• /
• pp.129-135
• /
• 2005

IT communication industries of current society are developed in enormous growth, our country leading the world in the number of super high speed internet equipments in use. In the pride oneself on communication network of those, mobile terminal technology and wireless phone production hold a high rank. Data communication and networking may be the fastest growing technologies in our culture today. In this way, IT fields conjugated in the daily quick, the fact that department of radiological science didn't discharged one's duties on current IT education. The curriculum of radiological technologists that play an important part between skill and occupation's education as major and personality didn't performed one's part most effectively on current IT environments and digital radiological equipments interface. Therefore, in this paper current curriculum of radiological science are catched hold of trend and problems on digital radiology environments, on fact the present state of problems, for radiological engineering and HIS manager, new curriculum course are suggested a reform measure of culture and major education curriculum introduction.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.11
• /
• pp.2736-2744
• /
• 2013

In this paper, we present a Smart Water Treatment Plant using Zigbee USN devices and a real-time monitoring system in K-water Flow Meter Calibration Center Building. For verification, the data of vertical type WTP such as flow rate, pressure, water level and water temperature are obtained by the Zigbee USN devices, operating in 2.45 GHz band, and be wirelessly surveilled by the real-time monitoring system. The received data from the sensor is transmitted to the data processing device, and then the processed data can be monitored on a smart phone. Consequently, the pilot plant based on the low-cost and high-efficiency USN has been developed with the performance analysis for the communication network and remote monitoring system on mobile devices.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.832-835
• /
• 2008

An information-oriented basis in today's society has been changing fast, and the desire for connectivity has caused an exponential growth in wireless communication and sensor network. Sensor networks using RFID, in particular, have led this trend due to the increasing exchange of data in Ubiquitous such as the home RF, access control system, U-Healthcare, and Logistics information Systems. Also, the RFID when it applies a technique, is able to raise the stability of shipping as controling the mobile course and an entrance and exit of the crews an well as previously preventing an accident from shipping. In this paper, we designed and implemented personnel control system using UHF-RFID in vessels which shows through host PC reading and writing tag.

• The KIPS Transactions:PartD
• /
• v.15D no.5
• /
• pp.599-608
• /
• 2008

Advanced wireless network and sensor technologies are capable of collecting information such as temperature, humidity, weight, and location about objects at real time in logistics area. Besides, users want to be notified of contextual information about interest of objects whenever they want it and wherever they want it. To satisfy these requirements, applications should collect and analyze contextual information at real time, and must support a service that can notify it to wanted users. Event-based service is one of the way to satisfy these requirement of users. In this paper, we design an event notification system focused on location- and RFID-based logistics area. To do this, we present XML-based event expression model, ECA-based profile definition model, and an algorithm that has high scalability by distinguishing event filtering in two steps. Based on these designs, our implemented system can apply to not only logistics area but also intelligent traffic control system based on RFID or GPS devices.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.11
• /
• pp.2119-2124
• /
• 2008

An information-oriented basis in today's society has been changing fast, and the desire for connectivity has caused an exponential growth in wireless communication and sensor network. Sensor networks using RFID, in particular, have led this trend due to the increasing exchange of data in Ubiquitous such as the home RF, access control system, U-Healthcare, and Logistics information Systems. Also, the RFID when it applies a technique, is able to raise the stability of shipping as controling the mobile course and an entrance and exit of the crews an well as previously preventing an accident from shipping. In this paper, we designed and implemented personnel control system using UHF-RFID in vessels which shows through host PC reading and writing tag.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.12
• /
• pp.9-16
• /
• 2011

Most of the current mobility management protocols such as MIPv4/6 and its variants standardized by the IETF do not support global seamless handover. This is because they require comprehensive changes of the existing network infrastructure. In this article, we propose a simple mobility management protocol (SMMP) which can support global seamless handover between homogeneous or heterogeneous wireless networks. The idea is that the SMMP employs separate location management function as done in SIP to support global user and service mobility. In addition, the bidirectional tunnels are dynamically constructed to support seamless IP mobility by extending the IEEE 802.21 MIH standards. The detailed architecture and functions of the SMMP have been designed. Finally, the simulation results, using NS-2, show that the proposed SMMP outperforms the existing MIPv6 and HMIPv6 in terms of handover latency, packet loss, pear signal noise ratio (PSNR).

• Journal of Broadcast Engineering
• /
• v.13 no.5
• /
• pp.719-731
• /
• 2008

This paper defines QoE (Quality of Experience) for multi-view video streaming service over WiBro and proposes the CLO (Cross-Layer Optimization) algorithm can maximize this. Proposal CLO algorithm contains from physical layer to video layer. Under the time-varying wireless channel condition, the CLO technique takes view-wise and the temporal priority of the multi-view video into consideration in order to decide the transmission of frames and its FEC level. At the handover situation, it is shown through computer simulation that the optimal quality of the multi-view video can be achieved using the minimum amount of resources if the proposed CLO technique is applied.

• Journal of Service Research and Studies
• /
• v.2 no.2
• /
• pp.91-98
• /
• 2012

The emergence of new types of embedded computing devices and developments in wireless networking are broadening the domain of computing from the work place and home office to other facets of everyday life. This trend is expected to lead to a proliferation of Internet of Things (IoT) environments, in which inexpensive and interconnected computing devices are capable of supporting users in a range of tasks. Context-aware computing is a key source to develop such smart services. However, there are many challenges to enable services to be smart; Heterogeneous Computing Environments, Resource Limitations, Large Amount of Data Produced, and Different Requirements for Context Interpretation. Because of these challenges, there are difficulties in providing smart service by utilizing IoT devices. Currently, many researchers are conducting researches on mobile-computing based smart service development and provisioning and network infrastructure for interconnected IoT devices. Still, there are some limitations on developing core technologies for IoT computing based smart service development. In order to remedy this situation, this thesis presents a reusable framework that provides unique and noble features which are required in developing advanced context-aware IoT applications.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.3
• /
• pp.103-110
• /
• 2010

This paper addressed the implementation of the systematic performance analysis of Quality of Service (QoS) by using OPNET simulator in the interworking architecture of IEEE 802.16e (mobile WiMAX) and IEEE 802.11e (WLAN) wireless network. Four simulation cases were provided in OPNET simulator and a voice traffic was simulated with various performance metrics, such as Mean Opinion Score (MOS), end-to-end delay and packet transmission ratio. Based on the simulation results, the MOS value presented better in WiMAX to WiMAX case compared to others in both static and mobility case. Meanwhile, end-to-end delay was not greatly affected by mobility in four cases. However, mobility was affected much in MOS value and packet transmission ratio in WLAN to WLAN case than in others.