• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권7호
• /
• pp.2338-2353
• /
• 2015

In this paper, the optimal power allocation algorithm that minimizes the aggregate bit error rate (BER) of the secondary user (SU) in a downlink orthogonal frequency division multiplexing (OFDM) based cognitive radio (CR) system, while subjecting to the interference power constraint and the transmit power constraint, is investigated under the assumption that the instantaneous channel state information (CSI) of the interference links between the secondary transmitter and the primary receiver, and between the primary transmitter and the secondary receiver is perfectly known. Besides, a suboptimal algorithm with less complexity is also proposed. In order to deal with more practical situations, we further assume that only the channel distribution information (CDI) of the interference links is available and propose heuristic power allocation algorithms based on bisection search method to minimize the aggregate BER under the interference outage constraint and the transmit power constraint. Simulation results are presented to verify the effectiveness of the proposed algorithms.

• 전력전자학회논문지
• /
• 제25권6호
• /
• pp.477-483
• /
• 2020

This study proposes a DQ synchronous reference frame model of a series-parallel tuned inductive power transfer (SP-IPT) system. The wireless power transmission system experiences control difficulty because the transmitter-side controller cannot directly measure the receiver-side load voltages and currents. Therefore, a control-oriented circuit model that shows the dynamics of the IPT system is required to achieve a well-behaved controller. In this study, an equivalent circuit model of the SP-IPT system in a synchronously rotating reference frame is proposed using the single-phase DQ transformation technique. The proposed circuit model is helpful in modeling the dynamics of the voltages and currents of the transmitter- and receiver-side resonant tanks and loads. The proposed circuit model is evaluated using frequency- and time-domain simulation results.

• 방송공학회논문지
• /
• 제5권2호
• /
• pp.273-280
• /
• 2000

건물 외부에 위치하는 송신기와 건물 내부에 위치하는 수신기 사이의 채널 특성을 분석하기 위해 전파 추적 기법을 기반으로 한 모의 실험을 수행하였다. 본 모의 실험에서는 건물 내에 29개의 수신기를 설치하고, 각 수신기에서의 수신 특성을 다중 경로를 통해 수신된 여러 개의 신호의 상호 간섭 패턴을 이용하여 분석하였다. 모의 실험 결과에서 수신기의 위치와 송신기의 위치 및 전파의 편파 특성에 따라 수신 특성이 다르게 나타났고, 상쇄 간섭으로 인해 창가 쪽에 위치한 수신기의 수신 파워가 건물 안 쪽에 위치한 수신기의 수신 파워보다 작게 나타나는 경우도 있었다. 본 논문에서는 채널 파라미터들, 즉 mean excess delay와 rms delay spread를 통해 송신기와 수신기간의 채널 특성 분석도 수행하였다.

• 전기전자학회논문지
• /
• 제2권2호
• /
• pp.173-177
• /
• 1998

실내환경에서의 광무선 LAN은 송수신기 사이의 시정선이 성립되지 않는 경우 넓은 수광각을 얻기 위해 반구형 렌즈나 반사체를 사용해야 하며, 실내환경에서 반구형 렌즈를 사용했을 때, 교란대기를 통과하는 광신호는 진폭과 위상이 불규칙하게 변화하고, 빔을 편향시킬 수 있다. 이 페이딩은 비트오류율을 증가시켜 결국 광무선통신의 성능을 저하시키게 된다. 본 논문에서는 시정선이 성립되지 않는 광무선채널을 고려하여 수신기에 반구형 렌즈를 장착한 경우, 천정각에 따른 신호대잡음비를 고찰하고, 또한 실내온도에 기인한 교란효과가 통신성능에 미치는 영향를 살펴 본다.

• Nuclear Engineering and Technology
• /
• 제53권5호
• /
• pp.1483-1490
• /
• 2021

Many studies are undertaken into nuclear power plants (NPPs) in preparation for accidents exceeding design standards. In this paper, we analyze the applicability of various wireless communication technologies as accident countermeasures in different NPP environments. In particular, a commercial wireless communication module (WCM) is investigated by measuring leakage current and packet error rate (PER), which vary depending on the intensity of incident radiation on the module, by testing at a Co-60 gamma-ray irradiation facility. The experimental results show that the WCMs continued to operate after total doses of 940 and 1097 Gy, with PERs of 3.6% and 0.8%, when exposed to irradiation dose rates of 185 and 486 Gy/h, respectively. In short, the lower irradiation dose rate decreased the performance of WCMs more than the higher dose rate. In experiments comparing the two communication protocols of request/response and one-way, the WCMs survived up to 997 and 1177 Gy, with PERs of 2% and 0%, respectively. Since the request/response protocol uses both the transmitter and the receiver, while the one-way protocol uses only the transmitter, then the electronic system on the side of the receiver is more vulnerable to radiation effects. From our experiments, the tested module is expected to be used for design-based accidents (DBAs) of "Category A" type, and has confirmed the possibility of using wireless communication systems in NPPs.

• 한국항행학회논문지
• /
• 제10권1호
• /
• pp.26-33
• /
• 2006

본 논문에서는 항공관제용 VHF대역 무선 수신기 설계 및 제작에 관하여 연구하였다. 모든 회로는 블록 단위로 설계 제작하여 검증 후 최종적으로 통합하였으며, 크게 3개의 모듈 즉, 수신부, 제어부, 전원부로 구성하였다. 성능은 관제용 무선 수신기에 적합한 사양을 만족하도록 설계 제작하였으며, 특히 수신기에 있어서 가장 중요한 성능 지표인 수신 감도는 -113 dBm으로 기존 상용 제품 보다 우수하였다. 연구된 항공관제용 무선 수신기는 CNS/ATM의 기본 요소로 사용되기에 충분한 시스템이라고 판단된다.

• 한국멀티미디어학회논문지
• /
• 제18권5호
• /
• pp.652-662
• /
• 2015

It is necessary to develop small, implantable bio-telemetry systems which can measure and transmit patients' bio-signals from internal body to external receiver. When measuring bio-signals, like electrical bio-signals, acoustic bio-signal measurement has also a big clinical usefulness. But, sound signal has larger frequency bandwidth than any other bio-signals. When considering these issues, a wireless telemetry system which has rapid data transmission rate proportional to wide frequency bandwidth is necessary to be developed. The bluetooth module is used to overcome the data rate limitation caused by the large frequency bandwidth. In this paper, a novel multimedia bluetooth biotelemetry system was developed which consists of transmitter module located in the body and receiver device located outside of the body. The transmitter consists of microphone, bluetooth, and wireless charging device. And the receiver consists of bluetooth and codec system. The sound inside the skin is captured by microphone and sent to receiver by bluetooth while charging. The wireless charging system constantly supplies the electric power to the system. To verify the performance of the developed system, an in vitro experiment has been performed. The results show that the proposed biotelemetry system has ability to acquire the sound signals under the skin.

• 대한임베디드공학회논문지
• /
• 제11권6호
• /
• pp.379-392
• /
• 2016

This paper presents the design and simulation of a laser power beaming (LPB) system for an electric vehicle that establishes an optimal power transmission path based on the received signal strength. The LPB system is possible to transfer power from multiple transmitters to a single receiver according to the characteristics of the laser and the solar panel. When the laser beams of multiple transmitters aim at a solar panel at the same time, the received power is the sum of all energy at a solar panel. Our proposed LPB system consists of multiple transmitters and multiple receivers. The transmitter sends its power characteristics as optically coded pulses with a class 1 laser beam and powers as a high-intensity laser beam. By using the attenuated power level, the receiver can estimate the maximum receivable powers from the transmitters and select optimal transmitters. Throughout the simulation, we verified the possibility that different LPB receivers were achieved their required power by the optimal allocation of the transmitter among the various transmitters.

• ETRI Journal
• /
• 제35권4호
• /
• pp.578-586
• /
• 2013

Using a sub-terahertz (sub-THz) wave generated using a photonics-based technology, a high-speed wireless link operating at up to 10 Gbps is designed and demonstrated for realization of seamless connectivity between wireless and wired networks. The sub-THz region is focused upon because of the possibility to obtain sufficient bandwidth without interference with the allocated RF bands. To verify the high-speed wireless link, such dynamic characteristics as the eye diagrams and bit error rate (BER) are measured at up to 10 Gbps for non-return-to-zero pseudorandom binary sequence $2^{31}-1$ data. From the measurement results, a receiver sensitivity of -23.5 dBm at $BER=10^{-12}$ is observed without any error corrections when the link distance between the transmitter and receiver is 3 m. Consequently, we hope that our design and experiment results will be helpful in implementing a high-speed wireless link using a sub-THz wave.

• Journal of Biosystems Engineering
• /
• 제24권1호
• /
• pp.75-80
• /
• 1999

Signal separation and transmission are essential for automatic breeding management of domestic animals. Electronic identification system could transmit the signal of an individual within a defined range to a personal computer by an electromagnetic signal recognition method. Signals for individual recognition were originated by controlling 12 tri-state pins of IC(PT2262) in a transmitter. PT 2262 can generate 4,096 codes. These encoded signals were modulated and transmitted with wireless lines from the transmitter. Then they were demodulated in a receiver, and the signals were transmitted to the micro-processor through an interface and were identified in a PC.