• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권2호
• /
• pp.565-581
• /
• 2019

This paper investigates the wireless powered two way relay network (WPTWRN), where two single-antenna users and one single-antenna relay firstly harvest energy from signals emitted by a multi-antenna power beacon (PB) and then two users exchange information with the help of the relay by using their harvested energies. In order to improve the energy transfer efficiency, energy beamforming at the PB is deployed. For such a network, to explore the performance limit of the presented WPTWRN, an optimization problem is formulated to obtain the achievable rate region bounds by jointly optimizing the time allocation and energy beamforming design. As the optimization problem is non-convex, it is first transformed to be a convex problem by using variable substitutions and semidefinite relaxation (SDR) and then solve it efficiently. It is proved that the proposed method achieves the global optimum. Simulation results show that the achievable rate region of the presented WPTWRN architecture outperforms that of wireless powered one way relay network architecture. Results also show that the relay location has significant impact on achievable rate region of the WPTWRN.

• 한국공간구조학회논문집
• /
• 제19권1호
• /
• pp.101-108
• /
• 2019

Recently, measuring instruments for SHM of structures has been developed. In general, the wireless transmission of sensor signals, compared to its wired counterpart, is preferable due to the absence of triboelectric noise and elimination of the requirement of a cumbersome cable. However, the low-cost wireless MEMS sensor has high noise density and transmits the signal wirelessly, so data transmission delay occurs during measurement. Therefore, the footbridges that was previously measured by a mobile phone in 2014 was remeasured using G-Link-200, iPad and iPhone to compare their performance.

• 한국안전학회지
• /
• 제37권5호
• /
• pp.14-21
• /
• 2022

The purpose of this study was to apply the signal pattern recognition technique to the digital wireless fire-alarm system and to reduce unwanted fire alarms. In this study, the fire alarms of the K Institute, which operates the largest digital wireless fire-alarm system in Korea, were classified into normal operations and unwanted fire alarms, and these were analyzed and compared with actual fire signals. In addition, by designing a non-fire signal filter and applying it to the K Institute, we confirmed that the monthly unwanted fire alarm rate of all 5,713 detectors decreased sharply. In particular, the unwanted fire alarm rate for flame decreased from 1.09% to 0.11% and the unwanted fire alarm rate for smoke decreased from 0.65% to 0.035%.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.279-282
• /
• 2002

In this paper, we present a new method for monitoring of ECU's self diagnostic signals of vehicle without wire. In order to measure the ECU's self diagnostic signals, the interfaced circuit is designed to communicate ECU and a designed display terminal according to the ISO, SAE regulation of communication protocol standard. A 80C196KC processor is used for communicating ECU's self diagnostic signals and the results are sent to PDA monitoring system. Software on PDA is developed to monitor the ECU's self diagnostic signals using the Embedded Visual C++ compiler in which RS232 port is programmed by half duplex method. The algorithms for measuring the ECU's self diagnostic signals are verified to monitor ECU's state. At the same time, the information to fix the vehicle's problem can be shown on the developed PDA software. The possibility for remote measurement of ECU self diagnostic signal using PDA is also verified through the developed systems and algorithms.

• 한국안전학회지
• /
• 제37권3호
• /
• pp.16-23
• /
• 2022

This study aims to provide a fundamental material for identifying fire and no-fire signals using the detection signal characteristics of IoT-based fire-detection systems. Unlike analog automatic fire-detection equipment, IoT-based fire-detection systems employ wireless digital communication and are connected to a server. If a detection signal exceeds a threshold value, the measured values are saved to a server within seconds. This study was conducted with the detection data saved from seven fire accidents that took place in traditional markets from 2020 to 2021, in addition to 233 fire alarm data that have been saved in the K institute from 2016 to 2020. The saved values demonstrated variable and continuous VC-Signals. Additionally, we discovered that the detection signals of two fire accidents in the K institution had a VC-Signal. In the 233 fire alarms that took place over the span of 5 years, 31% of smoke alarms and 30% of temperature alarms demonstrated a VC-Signal. Therefore, if we selectively recognize VC-Signals as fire signals, we can reduce about 70% of false alarms.

• 재활복지공학회논문지
• /
• 제7권1호
• /
• pp.51-58
• /
• 2013

고령화 시대로 변화해 가면서 재활 복지 산업, 스포츠 산업 시장이 빠르게 성장하고 있다. 특히, 근전도, 뇌전도, 안전도등 생체신호를 이용하여 휠체어 등 복지기기, 의수 및 의족을 제어할 수 있는 재활기기 및 일상의 전자기기 등을 제어할 수 생체 인터페이스 분야는 새로운 미래 신기술영역이며, 또한 사회적 약자인 장애인, 노약자, 재활환자에게 많은 도움을 줄 수 있을 뿐만 아니라 일반인에게도 다양한 응용분야에서 활용될 것이다. 상용화된 생체신호계측 장비 및 인터페이스의 경우 부피가 크고 복잡하며, 고가 제품으로 실생활에 이용하기에는 많은 제약을 갖고 있다. 본 논문에서는 휴대가 가능한 형태의 소형 근전도 신호계측 장치를 구현하였으며, 무선 전송이 가능한 형태의 인터페이스 시스템을 통하여 근전도 신호를 통한 하드웨어 장치 제어가 가능한 제어모듈 개발에 관한 연구를 수행하였다. 손목의 움직임을 통해 발생된 근전도 신호를 입력받아 불필요한 잡음을 제거하고, 신호를 증폭하는 휴대형 하드웨어 모듈을 설계 하였다. 획득된 근전도 신호를 디지털 신호로 변환과 함께 디지털 필터링을 위해 TI사의 TMS320F2808 DSP칩을 사용하여 구현하였다. 또한 획득된 근전도 신호로부터 주성분 분석 기법을 이용하여 상, 하, 좌, 우의 4 동작신호로 분류하였으며 분류된 데이터는 PC 터미널로 무선 전송하여 표시하도록 하였다. 최종적으로 4가지 동작에 대해 85%의 인식률을 얻었으며, 지금보다 높은 인식률을 얻게 된다면 근전도를 이용한 손목동작을 통하여 다양한 하드웨어 시스템을 제어하는 제어신호로 활용이 가능하리라 본다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권5호
• /
• pp.967-979
• /
• 2013

Now a day, Wireless Sensor Networks (WSNs) are being widely used in different areas one of which is healthcare services. A wireless medical sensor network senses patient's vital physiological signs through medical sensor-nodes deployed on patient's body area; and transmits these signals to devices of registered medical professionals. These sensor-nodes have low computational power and limited storage capacity. Moreover, the wireless nature of technology attracts malicious minds. Thus, proper user authentication is a prime concern before granting access to patient's sensitive and private data. Recently, P. Kumar et al. claimed to propose a strong authentication protocol for healthcare using Wireless Medical Sensor Networks (WMSN). However, we find that P. Kumar et al.'s scheme is flawed with a number of security pitfalls. Information stored inside smart card, if extracted, is enough to deceive a valid user. Adversary can not only access patient's physiological data on behalf of a valid user without knowing actual password, can also send fake/irrelevant information about patient by playing role of medical sensor-node. Besides, adversary can guess a user's password and is able to compute the session key shared between user and medical sensor-nodes. Thus, the scheme looses message confidentiality. Additionally, the scheme fails to resist insider attack and lacks user anonymity.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권9호
• /
• pp.4223-4239
• /
• 2016

In this paper, we consider an amplify-and-forward (AF) full-duplex relay network (FDRN) using simultaneous wireless information and power transfer, where a battery-free relay node harvests energy from the received radio frequency (RF) signals from a source node and uses the harvested energy to forward the source information to destination node. The time-switching relaying (TSR) protocol is studied, with the assumption that the channel state information (CSI) at the relay node is imperfect. We deliver a rigorous analysis of the outage probability of the proposed system. Based on the outage probability expressions, the optimal time switching factor are obtained via the numerical search method. The simulation and numerical results provide practical insights into the effect of various system parameters, such as the time switching factor, the noise power, the energy harvesting efficiency, and the channel estimation error on the performance of this network. It is also observed that for the imperfect CSI case, the proposed scheme still can provide acceptable outage performance given that the channel estimation error is bounded in a permissible interval.

• 제어로봇시스템학회논문지
• /
• 제17권10호
• /
• pp.1059-1066
• /
• 2011

This paper makes a close inquiry into ill-conditioning that may be occurred in wireless localization of the sensor nodes based on network signals in the wireless sensor network and provides the clue for solving the problem. In order to estimate the location of a node based on the range information calculated using the signal propagation time, LS (Least Squares) method is usually used. The LS method estimates the solution that makes the squared estimation error minimal. When a nonlinear function is used for the wireless localization, ILS (Iterative Least Squares) method is used. The ILS method process the LS method iteratively after linearizing the nonlinear function at the initial nominal point. This method, however, has a problem that the final solution may converge into a LM (Local Minimum) instead of a GM (Global Minimum) according to the deployment of the fixed nodes and the initial nominal point. The conditions that cause the problem are explained and an adaptive method is presented to solve it, in this paper. It can be expected that the stable location solution can be provided in implementation of the wireless localization methods based on the results of this paper.

• 한국통신학회논문지
• /
• 제35권5C호
• /
• pp.472-478
• /
• 2010

UWB 표준인 IEEE 802.15.3a 채널의 무선 통신 시스템 환경에서 채널에 적합하고 추정 정확도가 우수한 신호 도착 방향(AOA) 매개변수 추정 기반의 실내 무선 위치인식 알고리즘을 위한 평균가중 AOA 추정기법을 제안한다. AOA 매개 변수 추정을 위한 IEEE 802.15.3a 기반의 초광대역 신호 모형을 설정하고, 종래 추정 기법보다 추정 정확도가 우수한 평균가중 기반의 다중신호 분류 기법들을 제안한다. 컴퓨터 모의실험을 통해, IEEE 802.15.3a 채널이 포함한 실내 무선 위치인식 시스템 환경을 구축하고, 제안한 AOA 추정 방식을 통해 종래 방식 보다 우수한 추정 결과를 보인다.