• 제목/요약/키워드: Wireless Control System

검색결과 1,605건 처리시간 0.037초

무선충전시스템의 충전 제어 방식 (Charging Control of Wireless Charging System)

  • 신한호;허준;전성즙
    • 전력전자학회논문지
    • /
    • 제24권4호
    • /
    • pp.303-309
    • /
    • 2019
  • A hybrid control of a rectifier/regulator of wireless power transfer systems for electric vehicles is studied. A combined rectifier/regulator is used for charging control. The hybrid control comprises integral cycle control and pulse width modulation control to cope with the variations in the induced voltage due to clearance and alignment. The hybrid control has good control capability and does not cause severe switching loss. A 22 kW prototype of the Wireless Power Transfer class 4 charging system defined by the Society of Automotive Engineers is constructed and tested to verify the proposal.

IEEE 802.11에서 멀티미디어 QoS 보장을 위한 무선 측정 기반 TFRC 기법 (Wireless Measurement based TFRC for QoS Provisioning over IEEE 802.11)

  • 변재영
    • 한국통신학회논문지
    • /
    • 제30권4B호
    • /
    • pp.202-209
    • /
    • 2005
  • 본 논문에서는 first-hop 무선 채널을 갖는 무-유선망에서 채널 특성에 따라 코딩 비트율을 조절할 수 있는 동적 TCP-friendly 비트율 제어방식 (TFRC)을 제안한다. 제안되는 비트율 제어 기법은 무선망을 통해 전송되는 멀티미디어 플로우의 QoS 성능 저하 현상을 피하기 위해 패킷 손실 통계자료를 이용한 새로운 무선 손실 구별 알고리즘을 사용하고 있다. 이 알고리즘은 무-유선망에서 TCP 플로우와 함께 백본 대역폭을 공유하는 동안 TCP-friendly하도록 비트율을 생성한다. 실험 결과를 통해 제안하는 비트율 제어방식의 시스템은 TFRC 흐름 제어에서 무선 손실의 영향을 제거하고 신뢰성이 낮은 무선 링크에 의해서 발생되는 비디오 스트림의 갑작스런 품질 저하 현상을 상당히 줄일 수 있음을 알 수 있다.

페이져 시스템을 이용한 무선 원격제어용 POCSAG 수신기 인터페이스회로 설계 (Design of POCSAG Receiver Interface Circuits for Wireless Remote Control using Pager System)

  • 이재민
    • 한국산업융합학회 논문집
    • /
    • 제4권3호
    • /
    • pp.289-294
    • /
    • 2001
  • In this paper a POCSAG receiver interface circuit for wireless remote control using pager system is presented. SM8212A and AT89C51 chips are used for the core of system design. The proposed system is able to communicate with computers through RS-232C interface, which enables users to manage the data from the pager system on computers in real time. Analysis of SM8212A for Ole algorithm of CPU control program is described. The hardware is implemented on a PCB and the control program is made by C++ and assembly language. The performance of designed system is confirmed by experiments using the TESCOM equipments.

  • PDF

TEMPERATURE CONTROL AND COMPRESSIVE STRENGTH ASSESSMENT OF IN-PLACE CONCRETE STRUCTURES USING THE WIRELESS TEMPERATURE MEASURING SYSTEM BASED ON THE UBIQUITOUS SENSOR NETWORK

  • Ho Kyoo JO;Hyung Rae KIM;Tae Koo KIM
    • 국제학술발표논문집
    • /
    • The 3th International Conference on Construction Engineering and Project Management
    • /
    • pp.794-799
    • /
    • 2009
  • The temperature control of in-place concrete is the most important factor for an early age of curing concrete. Heat stress of mass concrete caused by the heat of hydration can induce the crack of concrete, and a frost damage from cold weather casting concrete results defect on compressive strength and degradation of durability. Therefore, success and failure of concrete work is dependant on the measurement and control of concrete temperature. In addition, the compressive strength assessment of in-place concrete obtained from the maturity calculated from the history of temperature make a reduction of construction cycle time, possible. For that purpose, wireless temperature measuring system was developed to control temperature and assess strength of concrete. And, it was possible to monitor the temperature of concrete over 1km apart from site office and to take a proper measure; mesh-type network was developed for wireless sensor. Furthermore, curing control system that contains the program capable to calculate the maturity of concrete from the history of temperature and to assess the compressive strength of concrete was established. In this study, organization and practical method of developed curing control system are presented; base on in-place application case.

  • PDF

무선 홈 IoT 서비스를 위한 적응형 트래픽 간섭제어 시스템 (An Adaptive Traffic Interference Control System for Wireless Home IoT services)

  • 이종득
    • 디지털융복합연구
    • /
    • 제15권4호
    • /
    • pp.259-266
    • /
    • 2017
  • 무선 홈 IoT (Internet of Things)상에서 대용량 트래픽 간섭은 패킷 손실의 원인이 되며, 패킷 손실은 무선 홈 네트워크의 QoS와 처리율을 떨어뜨린다. 본 논문에서는 실시간 트래픽과 비실시간 트래픽을 탐지하여 무선 홈 IoT 서비스의 QoS 및 처리율을 향상시키기 위한 새로운 적응형 트래픽 간섭 제어 시스템, ATICS(Adaptive Traffic Interference Control System)을 제안한다. 제안된 시스템은 트래픽 특성에 따라 단기(short term) 트래픽 혼잡 프로세스와 장기(long-term) 트래픽 혼잡 프로세스로 구분하여 트래픽 간섭을 제어한다. 시뮬레이션 결과 제안된 기법은 다른 비교 기법들에 비해서 트래픽 간섭 제어 성능 척도가 더 효율적임을 보인다.

레이저 장비의 전송 경로 자가 교정을 위한 무선 네트워크 시스템 (Wireless Networked System for Transmission Path Self-Calibration of Laser Equipment)

  • 이준영;유성은
    • 대한임베디드공학회논문지
    • /
    • 제15권2호
    • /
    • pp.79-85
    • /
    • 2020
  • IIoT stands for Industrial Internet of Things used in manufacturing, healthcare, and transportation in networked smart factories. Recently, IIoT's environment requires an automated control system through intelligent cognition to improve efficiency. In particular, IIoT can be applied to automatic calibration of production equipment for improved management in industrial environments. Such automation systems require a wireless network for transmitting industrial data. Self-calibration systems in laser transmission paths using wireless networks can save resources and improve production quality by real-time monitoring and remote control of laser transmission path. In this paper, we propose a wireless networked system for self-calibration of laser equipment that requires a laser transmission path, and we show the results of the prototype evaluation. The self-calibration system of laser equipment measures the coordinates of the laser points with sensors and sends them to the host using the proposed application protocol. We propose a wireless network service for the wired motor controller to align the laser coordinates. Using this wireless network, the host controls the motor by sending a control command of the motor controller in an HTTP message based on the received coordinate values. Finally, we build a prototype system of the proposed design to verify the detection performance and analyze the network performance.

CPN을 이용한 무선원격제어시스템의 안전성 검증 (Security Verification of Wireless Remote Control System Using CPN)

  • 이문구
    • 정보보호학회논문지
    • /
    • 제13권5호
    • /
    • pp.81-90
    • /
    • 2003
  • 기존 웹 기반인 시스템 관리 소프트웨어 솔루션들은 시간적, 공간적 제약을 갖는다. 그리고 오류 메시지에 대한 불확실한 통보와 실시간 지원요구 및 긴급조치가 어렵다는 문제점들을 갖는다. 이러한 문제들을 해결하기 위해서 모바일 통신기기를 이용하여 원격시스템을 관리 및 모니터링하고 즉각적으로 원격지의 시스템을 제어할 수 있는 무선 원격제어 시스템을 설계 및 구현하였다. 구현된 무선 원격제어 시스템은 이러한 문제의 해결뿐만 아니라 보안의 문제도 갖고 있다. 그러므로 본 논문에서는, 무선 원격제어 시스템을 위한 보안 문제에 초점을 맞추어 진행하였으며, 설계한 보안기능은 사용자에 대한 모바일장비 사용자 인증과 대상 시스템 접근제어 기능을 갖도록 하였다. 이러한 보안 기능에 대한 안전성 검증을 위하여 각 단계에 대한 모든 가능한 상태를 표현할 수 있는 CPN(Coloured Petri Nets)을 도입하였다. 그리고 본 논문에서는 CPN 기반의 상태 불변식으로 안전성을 검증하였다. 제안한 보안 기능의 CPN 표현과 분석방법은 차후에 다른 서비스 모델의 설계와 검증에 유용한 방법이 될 수 있다.

Development of a Multiple SMPS System Controlling Variable Load Based on Wireless Network

  • Ko, Junho;Park, Chul-Won;Kim, Yoon Sang
    • Journal of Electrical Engineering and Technology
    • /
    • 제10권3호
    • /
    • pp.1221-1226
    • /
    • 2015
  • This paper proposes a multiple switch mode power supply (SMPS) system based on the wireless network which controls variable load. The system enables power supply of up to 600W using 200W SMPS as a unit module and provides a controlling function of output power based on variable load and a monitoring function based on wireless network. The controlling function for output power measures the variation of output power and facilitates efficient power supply by controlling output power based on the measured variation value. The monitoring function guarantees a stable power supply by observing the multiple SMPS system in real time via wireless network. The performance of the proposed system was examined by various experiments. In addition, it was verified through standardized test of Korea Testing Certification. The results were given and discussed.

UAV용 GCS 및 안테나 추적 시스템 구현 (Implementation of GCS and Antenna Tracking System for UAV)

  • 박범순;최일규;김지철;전동익;이상철;오화석;강민영
    • 항공우주시스템공학회지
    • /
    • 제3권4호
    • /
    • pp.35-40
    • /
    • 2009
  • The first purpose of this study is to develop a GCS(Ground Control System) by using RF(Radio Frequency) wireless communication equipments for UAV(Unmanned Aerial Vehicle). The second goal is to develop an antenna tracking system operating automatically. UAV receives flight data from a RF wireless system. So the role of antenna tracking system is very important to keep good communication state between UAV and GCS. GCS can check flight data and display a aviation state of UAV in real-time. The flight data displayed in real-time by GCS include the latitude, longitude, altitude, speed and so on. Experiments that measure a communication range and reliability are needed to develop a RF wireless communication system.

  • PDF

무선 센서네트워크 기반 실시간 다중소스 센서데이터 관리시스템 구현 및 성능분석 (Implementation and Performance Analysis of Real-time Multi-source Sensor Data Management System Based on Wireless Sensor Network)

  • 강문식
    • 한국통신학회논문지
    • /
    • 제36권8B호
    • /
    • pp.1003-1011
    • /
    • 2011
  • 본 논문에서는 우선 센서네트워크를 기반으로 실시간 다중소스 센서데이터 관리시스템을 제안하고 구현하였다. 제안된 관리시스템은 대상시스템의 상태를 효율적으로 감시하고 제어하기 위해서 다수의 센서들로부터 수집된 실시간 데이터를 무선으로 서버로 전송하며, 이를 분석하여 동작하도록 설계되었다. 제안된 시스템은 원격지에서 세포배양장치와 같은 다중 소스 센서들을 클러스터 형태로 구성하고, 이들로부터 발생하는 센서데이터를 제어, 전송하며, 각 소스로부터 수신된 데이터를 소스별로 구분하여 관리가 가능하도록 구현하였다. 제안된 시스템의 성능을 평가하기 위해서 전송거리에 따른 전송 지연시간과 다중소스로부터 발생된 데이터 손실률을 측정하여 분석하였으며, 그 결과 우수한 성능을 보임을 확인하였다.