• The Transactions of the Korean Institute of Power Electronics
• /
• v.24 no.4
• /
• pp.303-309
• /
• 2019

A hybrid control of a rectifier/regulator of wireless power transfer systems for electric vehicles is studied. A combined rectifier/regulator is used for charging control. The hybrid control comprises integral cycle control and pulse width modulation control to cope with the variations in the induced voltage due to clearance and alignment. The hybrid control has good control capability and does not cause severe switching loss. A 22 kW prototype of the Wireless Power Transfer class 4 charging system defined by the Society of Automotive Engineers is constructed and tested to verify the proposal.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.4B
• /
• pp.202-209
• /
• 2005

In this paper, a dynamic TCP-friendly rate control (TFRC) is proposed to adjust the coding rates according to the channel characteristics of the wireless-to-wired network consisting of wireless first-hop channel. To avoid the throughput degradation of multimedia flows traveling through wireless lint the proposed rate control system employs a new wireless loss differentiation algorithm (LDA) using packet loss statistics. This method can produce the TCP-friendly rates while sharing the backbone bandwidth with TCP flows over the wireless-to-wired network. Experimental results show that the proposed rate control system can eliminate the effect of wireless losses in flow control of TFRC and substantially reduce the abrupt quality degradation of the video streaming caused by the unreliable wireless link status.

• Journal of the Korean Society of Industry Convergence
• /
• v.4 no.3
• /
• pp.289-294
• /
• 2001

In this paper a POCSAG receiver interface circuit for wireless remote control using pager system is presented. SM8212A and AT89C51 chips are used for the core of system design. The proposed system is able to communicate with computers through RS-232C interface, which enables users to manage the data from the pager system on computers in real time. Analysis of SM8212A for Ole algorithm of CPU control program is described. The hardware is implemented on a PCB and the control program is made by C++ and assembly language. The performance of designed system is confirmed by experiments using the TESCOM equipments.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.794-799
• /
• 2009

The temperature control of in-place concrete is the most important factor for an early age of curing concrete. Heat stress of mass concrete caused by the heat of hydration can induce the crack of concrete, and a frost damage from cold weather casting concrete results defect on compressive strength and degradation of durability. Therefore, success and failure of concrete work is dependant on the measurement and control of concrete temperature. In addition, the compressive strength assessment of in-place concrete obtained from the maturity calculated from the history of temperature make a reduction of construction cycle time, possible. For that purpose, wireless temperature measuring system was developed to control temperature and assess strength of concrete. And, it was possible to monitor the temperature of concrete over 1km apart from site office and to take a proper measure; mesh-type network was developed for wireless sensor. Furthermore, curing control system that contains the program capable to calculate the maturity of concrete from the history of temperature and to assess the compressive strength of concrete was established. In this study, organization and practical method of developed curing control system are presented; base on in-place application case.

• Journal of Digital Convergence
• /
• v.15 no.4
• /
• pp.259-266
• /
• 2017

The massive traffic interferences in the wireless home IoT provides the reason for packet losses, and it degrades the QoS (Quality of Service) and throughput on the home network. This paper propose a new adaptive traffic interference control system, ATICS, for enhancing QoS and throughput for IoT services as detecting a traffic process and non-traffic process in the wireless home network. The proposed system control the traffic interferences as distinguishing the short-term traffic process and long-term traffic process by traffic characteristics in wireless home networks. The simulation results shows that the proposed scheme have more efficient traffic control performance than the other schemes.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.15 no.2
• /
• pp.79-85
• /
• 2020

IIoT stands for Industrial Internet of Things used in manufacturing, healthcare, and transportation in networked smart factories. Recently, IIoT's environment requires an automated control system through intelligent cognition to improve efficiency. In particular, IIoT can be applied to automatic calibration of production equipment for improved management in industrial environments. Such automation systems require a wireless network for transmitting industrial data. Self-calibration systems in laser transmission paths using wireless networks can save resources and improve production quality by real-time monitoring and remote control of laser transmission path. In this paper, we propose a wireless networked system for self-calibration of laser equipment that requires a laser transmission path, and we show the results of the prototype evaluation. The self-calibration system of laser equipment measures the coordinates of the laser points with sensors and sends them to the host using the proposed application protocol. We propose a wireless network service for the wired motor controller to align the laser coordinates. Using this wireless network, the host controls the motor by sending a control command of the motor controller in an HTTP message based on the received coordinate values. Finally, we build a prototype system of the proposed design to verify the detection performance and analyze the network performance.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.13 no.5
• /
• pp.81-90
• /
• 2003

Existing web-based system management software solutions show some limitations in time and space. Moreover, they possess such as shortcomings unreliable error message announcements and difficulties with real-time assistance suppers and emergency measures. In order to solve these deficiencies, Wireless Remote Control System was designed and implemented. Wireless Remote Control System is able to manage and monitor remote systems by using mobile communication devices for instantaneous control. The implementation of Wireless Remote Control System leads to these security Problems as well as solutions to aforementioned issues with existing web-based system management software solutions. Therefore, this paper has focused on the security matters related to Wireless Remote Control System. The designed security functions include mobile device user authentication and target system access control. For security verification of these security functions introduced CPN(Coloured Petri Nets) which is capable of expressing every possible state for each stage. And then in this paper was verified its security through PI(Place Invariant) based on CPN(Coloured Petri Nets). The CPN expression and analysis method of the proposed security function can also be a useful method for analyzing other services in the future.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.3
• /
• pp.1221-1226
• /
• 2015

This paper proposes a multiple switch mode power supply (SMPS) system based on the wireless network which controls variable load. The system enables power supply of up to 600W using 200W SMPS as a unit module and provides a controlling function of output power based on variable load and a monitoring function based on wireless network. The controlling function for output power measures the variation of output power and facilitates efficient power supply by controlling output power based on the measured variation value. The monitoring function guarantees a stable power supply by observing the multiple SMPS system in real time via wireless network. The performance of the proposed system was examined by various experiments. In addition, it was verified through standardized test of Korea Testing Certification. The results were given and discussed.

• Journal of Aerospace System Engineering
• /
• v.3 no.4
• /
• pp.35-40
• /
• 2009

The first purpose of this study is to develop a GCS(Ground Control System) by using RF(Radio Frequency) wireless communication equipments for UAV(Unmanned Aerial Vehicle). The second goal is to develop an antenna tracking system operating automatically. UAV receives flight data from a RF wireless system. So the role of antenna tracking system is very important to keep good communication state between UAV and GCS. GCS can check flight data and display a aviation state of UAV in real-time. The flight data displayed in real-time by GCS include the latitude, longitude, altitude, speed and so on. Experiments that measure a communication range and reliability are needed to develop a RF wireless communication system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.8B
• /
• pp.1003-1011
• /
• 2011

In this paper, a real-time multi-source sensor data management system based on wireless sensor network is proposed and implemented. The proposed management system is designed to transmit the wireless data to the server in order to monitor and control the multi-source target's status efficiently by analyzing them. The proposed system is implemented to make it possible to control and transmit the wireless sensor data by classifying them, of which data are issued from the clustered sources composed of a number of the remote multiple sensors. In order to evaluate the performance of the proposed system, we measure and analyze both the transmission delay time according to the distance and the data loss rate issued from multiple data sources. From these results, it is verified that the proposed system has a good performance.