• Journal of Korean Association for Spatial Structures
• /
• v.17 no.4
• /
• pp.93-102
• /
• 2017

Wireless MEMS sensors have common features such as wireless communication, data measurement, embedded processing, battery-based self-power, and low cost, and increased measurement effectiveness. Wireless MEMS sensors enable efficient SHM without interfering with location because there is no requirement for triboelectric noise and cumbersome cables. However, there is little research on the communication distance with sensors and data. For instance, existing researches have limited communication distance experiments in civil engineering bridges. It is also necessary to investigate the characteristics of dynamic behavior and the communication distance of architectural structures with different wireless transmission/reception environments. Therefore, in a building structure with walls and slabs instead of open spaces, MEMS sensors and data loggers were used as distance experiments where communication disturbance between the vertical slab and the horizontal wall could actually be communicated.

• The Magazine of the IEIE
• /
• v.29 no.9
• /
• pp.18-30
• /
• 2002

Wireless communication systems will be one of the biggest drivers of semiconductor products over the next decade. Global Positioning System (GPS) and Blue-tooth, HomeRF, and Wireless-LNA system are just a few of RF-module candidate awaiting integration into next generation mobile phone. Motivated by the generation mobile phone. Motivated by the growing needs for low-cost and multi-band/multi-function single chip wireless transceivers, CMOS technology has been recognized as a most promising candidate for the implementation of the future wireless communication systems. This paper presents recent developments in RF CMOS technology, which is classified into device technology and circuit technology and from them forecasts technology and from them forecasts technology trends in the near future.

• Convergence Security Journal
• /
• v.15 no.4
• /
• pp.107-112
• /
• 2015

Due to the rapid development of wireless communication technology, foundation system of military communication that is based on the daily use technology has been changed in to wireless system. However, military communication contains clssified information, and it is expected to have increase amount of enemy's there in such a imperfect security system. The next generation of tactical network communication system is expected to adopt All IP based wireless system. This research studies expected threatening factor on the wireless environment, and find the appropriate tunneling techniques.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.2
• /
• pp.354-359
• /
• 2016

Power plants maintenance data is to be sent to management server system via a communication network. In this case, reliable communication network is required. Transmission of the power plants maintenance data is used in the wired communication network or wireless communication network. PLC communication network is a kind of wired communication network. However PLC communication network is easily affected by noise. On the vulnerable areas in power line system, such as a mountain or rural areas, it is difficult to form a power line communication network. For a wireless communication, environment are also influenced factors in wireless communication. Harsh environmental factors are bring the communication characteristic degradation. In such areas it can be used a combination of two networks and in this way the complementary function can be achieved. Power plants are distributed in various regions across the country. The appropriate communication network is needed to maintain the power plant.This study investigated the effect of environment on the wired communication and wireless communication. It would examine a variable factor which is affect to the communication characteristic. We used PLC communication for wired communication network and ZigBee communication for wireless communication network. We investigated the characteristics of a single communication network and it raised the need for a complex communication technology to complement a single communication network.

• The Magazine of the IEIE
• /
• v.29 no.9
• /
• pp.1020-1020
• /
• 2002

Wireless communication systems will be one of the biggest drivers of semiconductor products over the next decade. Global Positioning System (GPS) and Blue-tooth, HomeRF, and Wireless-LNA system are just a few of RF-module candidate awaiting integration into next generation mobile phone. Motivated by the growing needs for low-cost and multi-band/multi-function single chip wireless transceivers, CMOS technology has been recognized as a most promising candidate for the implementation of the future wireless communication systems. This paper presents recent developments in RF CMOS technology, which is classified into device technology and circuit technology and from them forecasts technology trends in the near future.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.1
• /
• pp.72-80
• /
• 2012

Binary CDMA is a new standard technology for wireless communication developed by our country that makes high speed communications and good quality of services. In this paper we researched the design and implementation methods of a wireless CCTV System based on the Binary-CDMA technology that makes it freely installed in any place without cables and laying works. We implemented the hardware and software for the CCTV system and developed a Prototype Wireless CCTV system based on the Binary-CDMA technology.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.3 no.2
• /
• pp.46-49
• /
• 2010

This paper has proposedfor wireless Ad-hoc networks with robust route maintenance schemes. The device feature Bluetooth and/or IEEE 802.11 network interfaces and communicate in a decentralized manner. The nodes have the responsibility of self-organizing so that the network is robust to the variations in network topology due to node mobility as well as the fluctuations of the signal quality in the wireless environment.

• Journal of Practical Engineering Education
• /
• v.13 no.2
• /
• pp.321-326
• /
• 2021

Wireless communication is a core technology constituting the Internet of Things (IoT), but there is no suitable educational equipment to learn various wireless communication technologies used in the Internet of Things through practice. This paper deals with the development of advanced education and training equipment that can perform various IoT wireless communication practices. It uses an Arduino mega board as a device to control various sensors. As wireless network technologies to send and receive the sensing date wirelessly, it makes use of RFID/NFC and Bluetooth among WPAN technologies, WiFi among WLAN technologies and LoRa and 2.4GHz wireless transceiver among WWAN technologies. In addition, GPS, infrared communication, I2C communication, and SPI communication are organized so that various IoT wireless communication technologies can be learned through practice. In addition, since the educational equipment developed in this paper is equipped with two devices, it is designed to perform transmission and reception experiments for wireless network technology within the equipment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.12
• /
• pp.1933-1941
• /
• 2016

This paper compares the performance of wireless communication technologies to replace the wired networks by wireless networks on avionics intra-communication. Due to the drawbacks of wired network, such as complexity, weight, maintenance cost and scalability, it leads to the high data rate and network traffic demands of avionics systems. Therefore, in WAIC(Wireless Avionics Intra-Communications) system suggested by ITU(International Telecommunication Union), based on environment of avionics system and requirements of a wired network, wireless network structures are defined to solve the problems of wired networks. In this paper, we consider features, advantages and disadvantages of wireless communication technologies which can be used for wireless avionics network, and we propose suitable wireless communication technology candidates for wireless avionics networks in WAIC environments.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.4
• /
• pp.1390-1405
• /
• 2014

This paper investigates optimal relay selection and power allocation under an aggregate power constraint for cooperative wireless sensor networks assisted by amplify-and-forward relay nodes. By considering both transmission power and circuit power consumptions, the received signal-to-noise ratio (SNR) at the destination node is calculated, based on which, a relay selection and power allocation scheme is developed. The core idea is to adaptively adjust the selected relays and their transmission power to maximize the received SNR according to the channel state information. The proposed scheme is derived by recasting the optimization problem into a three-layered problem-determining the number of relays to be activated, selecting the active relays, and performing power allocation among the selected relays. Monte Carlo simulation results demonstrate that the proposed scheme provides a higher received SNR and a lower bit error rate as compared to the average power allocation scheme.