• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.9
• /
• pp.2140-2146
• /
• 2014

Ocean buoys are operated for safe navigation and collecting ocean data. Recently, to reducing marine buoy's damage by ocean weather's bad condition and collision with vessels has been conducted in several field research. This paper's experiment is buoy condition monitoring about predefined data form by users. As a result using Wireless remote control board applying a radio signal processing algorithms, it can observe buoy's state at an interval of three minutes on the land. Acquired data type is changeable according to ocean weather condition or buoy's purpose of using in advance. Also, this paper conducted an experiment such as data-transmission's stability and wireless communication's availability. As results of the analysis of the transmitted data, the solar, wind and wave power indicates the maximum amount of power, 50 W, 20 W and 40 W respectively. The communication system proven through this research can apply to buoy or other ocean facility.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.5B
• /
• pp.549-556
• /
• 2011

In this paper, high performance radio buoy system for inshore and deep sea fishery is proposed and implemented. Binary FSK modulation technique is used for real-time communication & control between buoys and buoy finder, and optimum access protocol is adopted for minimizing the power consumption of radio buoy system. Using the GPS and sensor techniques, location and environments of radio buoy can be accurately monitored and traced by the mother ship. Developed buoy system with 10 W transmitting power can cover over 120km coastal range and operate more than 73 days of battery life. Proposed digital coding methods can also assure high security from burglary and loss.

• International Journal of Advanced Culture Technology
• /
• v.8 no.3
• /
• pp.269-274
• /
• 2020

It has used buoy for efficient domestic farm operations and fishermen fish. Buoy uses IoT-based communication to transmit water temperature, salinity, humidity, wind speed, etc. to fishers in real time. In this paper, we utilize LoRa, which enables communication in the marine environment, to construct a network and apply it to an actual buoy for monitoring. The implemented LoRa uses the 900MHz band to configure the network. The sensor consisted of a sensor that can monitor the atmospheric environment and a sensor that can monitor the marine environment. In addition, the information received in real time will be provided to the fishing village host. The fishermen were fully aware of this and took appropriate measures to conduct sea trials.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.7
• /
• pp.1068-1074
• /
• 2009

This paper describes a study for the buoy which should be operated by a stand-alone power system. The field of this study is related to a power system operated by two batteries which depends on the load power. The fluctuation of the voltages makes the life cycle of the battery shorten. The control algorithm has been proposed for reducing the voltage pulsation of the battery by operation strategy according to using purpose such as main or sub power supply system. The power system with battery is separated two parts and this has been proved through a simulation and a sea experiment. In order for the experiment to use a wireless monitoring system has been installed in buoy. This paper shows an excellent test result of wireless monitoring system for buoy.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.58 no.2
• /
• pp.141-152
• /
• 2022

As a method to understand the ecological habits around the artificial reef, various reports such as fishing gear survey, diving, sound survey, underwater CCTV and camera, etc. are reported. Among them, the sound survey method is carried out by installing an acoustic system on the ship and can be investigated regardless of the marine environment such as time constraints and turbidity. Such method, however, takes a lot of manpower and time as the ship travels at a constant speed. Investigations around artificial reefs are being conducted in an artificial way, and a lot of time and labor are consumed as such. Maritime buoys have been operated for various purposes such as route signs, weather observation, marine environment monitoring and defense monitoring for navigation safety in the past, but studies on monitoring systems for ecological habits and distribution of fish using marine buoys are remarkably insufficient. Therefore, this study aims to develop a system that allows users to directly monitor fish group detector data by estimating the distribution of fish groups around artificial reefs and using wireless communication at sea. In order to confirm the suitability of the maritime buoy used in this study, it was operated to compare data using LTE-equipped buoys capable of wireless communication and a data logger-type system buoy. Data transmission of buoys capable of LTE communication was carried out in a 10-minute ON, 10-minute OFF method due to the limitation of the power supply capacity, and data of the data logger-type buoy received full data. We compared and analyzed the data received from the two fish detectors. It is expected that real-time monitoring of the wireless buoy detection device using LTE will be possible through future research.

• Journal of Ocean Engineering and Technology
• /
• v.12 no.2 s.28
• /
• pp.139-146
• /
• 1998

This paper introduces a network system for monitoring coastal oceanographic data. The network system consists of three parts such as the buoy to observe oceanographic data, the local site to collect data transferred from buoys, and the host site to construct the oceanographic data-base and to share the information for monitoring coastal oceanographic data. The buoy has a one-board microcomputer to manage and to acquire coastal environment data in real-time. A wireless and wire communication technique is employed in order to transfer data measured by buoys and to link local and host sites, respectively. In measuring coastal environment data, this system shows more cost-effective way than the presents conventional. In addition, the realtime monitoring system continuously from various sites with the network systems.

• Journal of Advanced Marine Engineering and Technology
• /
• v.31 no.5
• /
• pp.583-591
• /
• 2007

This paper reports the performance of a 150W PV-wave hybrid system with battery storage in buoy. This system was originally designed to meet a new hybrid ower system for buoy in Korea. In the case or lighted buoys and lighthouses, a light failure alarm system of wireless radio is attached so that light failures are immediately notified to the office. At lighthouse offshore fixed lights and light buoys where commercial electricity is not available, the power source depends on solar system and batteries. This power system has a various problems. Therefore energy derived from the sunshine, wind and waves has been used as the energy source lot aids to navigation. Recently a hybrid system of combining the solar, wind and the wave generator is a favorable system lot the ocean facilities like lighthouse and buoy. The hybrid system in this paper is intended for variable DC load like light, communication system in the buoy and includes a PV-wane generation system and battery. This is composed a high efficiency charging algorithm, switching converter and controller. This paper includes discussion on system reliability, power quality, and effects of hybrid system in the buoy. Simulation and experimental results show excellent performance.

• Journal of information and communication convergence engineering
• /
• v.6 no.2
• /
• pp.140-145
• /
• 2008

We recently developed new offshore observation system using USN buoy, widely used to measure the directional properties of ocean wave, seawater temperature, UV light, longitude and latitude of the buoy using GPS module. This paper also documents the development and implementation of a buoy network for acquisition of data of base station with buoys. The major phases of the project include specification of the network, physical construction of network nodes, software development for control of nodes, and testing of network performance. We described some of the practical issues involved in designing, building and deploying a buoy network for oceanographic monitoring. The paper explains some of the design decisions and their consequences, and some of the lessons learned from a first lesson network trial at sea.

• Journal of Satellite, Information and Communications
• /
• v.11 no.2
• /
• pp.8-13
• /
• 2016

A buoy is a float attached by chain to the seabed to mark channels in a harbor or underwater hazards and can be classified into two major types as autonomous buoys and fixed buoys. When there is high demand such as marking channels in a harbor, monitoring ecology of ocean and environmental monitoring of coastal areas, smart buoys are developed. The smart buoys have wireless network systems such as GPS, CDMA and ZigBee. Using the GPS techniques, location and environments of buoy can be monitored and traced. However, the GPS in fixed buoy systems has a high power consumption and cost. Using many buoys on low power ZigBee basis allows dramatic reduction of the overall power consumption. In this study, it is aimed at the design of the trackable protocol for a buoy system which has low data rate and low power consumption. The proposed protocol has advantages that it can detect abnormal movement and gather trackable information without any system changes. In the introduced protocol, additional 2 bits and join request messages are used for trackable buoy system. The behaviors of improved protocol is modeled into petri-net and proved a reachability.

• Journal of Advanced Navigation Technology
• /
• v.25 no.5
• /
• pp.397-402
• /
• 2021

The real-name electric fishing gear system is one of the important policy capable to build 'abundant fishing ground' and to protect marine environment. And, fishing gear automatic-identification system is one of IoT services that can implement above-mentioned policy by using communication such as low power wide area (LPWA) and multi-sensing techniques. Fishing gear automatic -identification system can gather the location data and lost/hold data from electric buoy floated in sea and can provide them to fishermen and monitoring center in land. We have developed the communication modules and electric buoy consisted of fishing gear automatic-identification system. In this paper, we report the test results of communication distance between electric buoy and wireless node installed in fish boat and location error of electric buoy. It is confirmed that line of sight (LOS) distance between electric buoy and wireless node is obtained to be 62 km, which is two times of the desired value, and location error is obtained to be CEP 1 m, which is smaller than the desired value of CEP 5 m. Therefore, it is expected that service area and accuracy of the developed fishing gear automatic-identification system is more extended.