• Proceedings of the Korean Information Science Society Conference
• /
• 2002.04a
• /
• pp.130-132
• /
• 2002

In this work, we like to present the result of study obtained from actual experiment. We instrument the effect of smoothing on packet loss behavior in mobile terminal on broadband wireless network under various different system settings. This activity requires comprehensive streaming software suite including streaming server, CODEC, and streaming client.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2006.07a
• /
• pp.380-380
• /
• 2006

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.1346-1349
• /
• 2002

This paper presents the design and implementation of 16-QAM modem that can be applied to fixed broadband wireless access systenm. It is implemented in the hardware prototype that consist of FPGA(Field Programmable Gate Array) for digital signal processing and analog front end module for analog signal processing. We provide 20.48Mbps data rate using implemented modem and test the modem in KOREA 26㎓ broadband wireless local loop system including IFU(Intermediate Frequency Unit) and RFU(Radio Frequency Unit) via air interface.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.4
• /
• pp.86-96
• /
• 2008

In this paper, a new broadband rectenna is presented for the wireless transmission of microwave power. The new broadband rectenna element is based on a new printed monopole broadband antenna with size reduction using surface current distribution and a new broadband stub bandpass filter with suppression of second harmonics. A RF-to-DC conversion efficiency of 80% using a 270 ohm load resistor is obtain at 2.45 GHz. Also, a conversion efficiency of above 50 % is maintained from 1.8 GHz to 2.8 GHz.

• Journal of Satellite, Information and Communications
• /
• v.9 no.1
• /
• pp.45-50
• /
• 2014

In this paper, broadband wireless smart city network coverage was implemented targeting a city (Wonju) using the wireless mesh network. Through this, we could provide wireless network that can easily add network and be repaired easily and have high economic effect. In order to implement broadband wireless smart city network coverage, wireless mesh network has been designed through pre-survey of the region and appropriate selecting of equipment. In addition, the designed network is examined, evaluated and compared with existing network though simulation. The aim of this paper is to prove high cost saving effect of wireless mesh network and its superior performance and to suggest future oriented integrated network of Green IT though research.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.3 no.2
• /
• pp.81-89
• /
• 2004

In this paper, we describe ubiquitous environments and the trend of convergence that is an evolution path of. current telecommunication, and show the concept of broadband convergence network, service feature and evolution path. In order to converge wire and wireless communication, telecommunication and broadcasting, voice and data efficiently, broadband convergence network divides a network into service layer, control layer, transport layer, ubiquitous access and terminal layer. Broadband convergence network will be a network that can provide and control broadband multimedia services with QoS and security of different and customized level. Then we depict characteristics and types of broadband multimedia service, and describe the characteristic of broadband convergence network. Finally, we show ubiquitous network based on the broadband convert- gence network to provide ubiquitous service which is a future telecommunication service. We also describe requirements of ubiquitous network such as an intelligent and context based platform, convergence terminals, ubi- quitous computing devices, etc.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.1008-1013
• /
• 2011

The importance of broadband wireless communication system at subway tunnels is growing up. At 18GHz wireless video transmission system, the transmitter requires a digital modulation method. At subway tunnel, A 18GHz's influence of the multi-pass padding is strong. OFDM digital modulation that is strong for multi-pass padding is recommended. Duplexing methode uses FDD to transmit and receive broadband data at the same time. In the case of FDD we assign a private use channel each with the transmission at the receiving. In this paper, We implement multiple access wireless OFDM transceiver. We verified that one ground transceiver communicates with two car transceiver at the same time.

• IE interfaces
• /
• v.17 no.1
• /
• pp.121-127
• /
• 2004

In this paper, we present the base station(BS) processing capacity to provide the multimedia services in IMT-2000 wireless communication network. The IMT-2000 services are classified into two types, circuit and packet services, and user‘s environments such as indoor, pedestrian and vehicle are considered. Using the parameters of service economics and wireless technology, the user's reference traffic and BS‘s traffic are computed. The traffic is measured by throughput(kbps). Based on the measured traffic, the accommodating users in BS are also evaluated. In addition to, the BS design capacity is presented for varying the number of users and traffic distribution in different user's environments.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.569-572
• /
• 2003

The broadband wireless access industry, which provides high-tate network connections to stationary sites, has matured to the point at which it now has a standard for second-generation wireless metropolitan area networks. IEEE Standard 802.16, with its WirelessMAN air interface, set the stage for widespread and effective deployments worldwide. This paper presents an implementation of media access control that can be applied to BWA (Broadband Wireless Access) system. Medium access control (MAC) is a key issue in multi-access networks where a common channel is shared by many users. The designed MAC prototype roughly consists of MAC Hardware and MAC Software. The MAC Hardware part includes timing process, MAC transmission control, MAC reception control, and CRC/HCS process. The MAC Software part includes control of MAC signaling, network interface, and Physical (PHY) control. The designed MAC protocol will be integrated with the PHY of BWA in future and we can test overall system performance of MAC and PHY.

• 한국정보통신설비학회:학술대회논문집
• /
• 2006.08a
• /
• pp.47-52
• /
• 2006

In this paper, we suggested new network architecture to provide seamless service between the cellular system and new wireless broadband network such as IEEE 802.16e, called WiBro. The interworking technologies are very important issue because mobile operator should provide service connectivity between various wireless networks based on different access technologies. Moreover a change and modification on legacy network should be minimized for providing interworking with new wireless broad-band network. We implemented proposed interworking architecture between 3G cellular network and 802.16e network to provide seamless service including interworking unit in real test environment. Also, we performed performance evaluation in hybrid network environments.