• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.296-299
• /
• 2022

The rapid urban expansion and the increase in natural disasters due to the increase of population after industrialization and climate change are causing numerous urban management problems. The IP based hyper-connectivity caused by the initiation of the 4th industrial revolution enables a variety of technologies and services that produce vast amounts of data and solve urban management problems based on this. Especially, the quality of life is improved by providing the necessary information for life that are produced through a sensor network on wired and wireless communication. In this study, we intend to propose the method of optimal communcation network composition for innovative and futuristic city management technology through the case of K-water Smart Village Communication System

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.689-694
• /
• 2006

Wireless LAN is getting more popularity and plays a main role in electronic and telecommunication field. Wireless LAN is more convenient than wired LAN when mobility is required, and are sometimes the only feasible choice. Wireless LAN can also pose a significant security risk when not properly installed and maintained. Thus, this paper studies real-time message transmission using existing mobile telecommunication network and describes considerations and procedures when introducing wireless LAN concept and wireless LAN systems. It also studies integrated wired and wireless networking including wireless LAN bridge and AP technology of International Organization for Standardization, and especially real-time dynamic image data transmission in a moving train.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.8
• /
• pp.1696-1702
• /
• 2005

Real Time Transport Protocol (RTP) is the Internet standard protocol for transport of real time data audio/video IP Telephony, Multimedia Seivece. In case of 8kbps voice codec, the size of packet per data is 20bytes and become more large to minimal 40bytes with adding each layer's header in RTP/UDP/IP. To solve this problem, various header compression skill were suggested on point-to-point networks. But it compress even IP header and cannot be suitable to apply to end-to-end network Thus, We will renew header compression protocol to apply wired router-based network.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.6
• /
• pp.92-100
• /
• 2008

Ad-hoc network is a collection of wireless mobile hosts forming a temporary network without the aid of any centralized administration or reliable support services such as wired network and base stations. Recently, Ad-hoc networks are evolving to support multimedia contents according to expansion of ad hoc multi-hop communication system. Wireless ad-hoc network is different from the conventional wired network by frequent changes in network topology, number of routers and resources, there are a number of problems in applying conventional routing protocol to ad-hoc network. The AODV routing protocol is proposed for mobile node in ad-hoc networks. AODV protocol that provides to guarantee QoS for data transmission in ad hoc networks that link break frequently occurs. In this paper, AODV routing protocol based NDIS(Network Driver Interface Specification) is implemented. We design high performance image transmission that can operate with software(AODV) for ad-hoc networks without degradation. and verify operation of AODV routing protocol on the test bed.

• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.176-180
• /
• 2007

In this study, we deployed the cable tunnel inspection and monitoring system by wireless sensor network. It is shown that the wireless sensor network which is composed of sensor, wireless communication module, and gateway can be applied to cable tunnel monitoring system. Sensors considered herein are flame detection sensor, flood detection sensor, intruder detection sensor, and temperature sensor, etc. It is also found that the wireless sensor network can deliver sensing data reliably by wireless sensing technology. The gateway system that can transmit sensed data to server by CDMA is developed. Monitoring system is constructed by web service technology, and it is observed that this system can monitor the present state of tunnel without difficulties. The system provides an alternative to inspect and monitor the tunnel efficiently where the conventional wired system is infeasible.

• 한국정보통신설비학회:학술대회논문집
• /
• 2006.08a
• /
• pp.91-94
• /
• 2006

In this paper, we deployed the tunnel inspection and monitoring system by wireless sensor network. It is shown that the wireless sensor network which is composed of sensor, wireless communication module, and gateway system can be applied to tunnel monitoring system. Sensors included herein are acceleration transducers, fire-alarm sensors, water-level sensors, and magnetic contact sensors. It is also found that the wireless sensor network can deliver sensing data reliably by ad-hoc networking technology. The gateway system that can send the sensing data to server by CDMA (code division multiple access) is developed. Finally, monitoring system is constructed by web service technology, and it is observed that this system can monitor the present state of tunnel without difficulties. Furthermore, the above system provides an alternative to inspect and monitor the tunnel efficiently where the conventional wired system cannot be applied.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.549-552
• /
• 2008

In this study, we deployed the cable tunnel inspection and monitoring system by wireless sensor network. It is shown that the wireless sensor network which is composed of sensor, wireless communication module, and gateway can be applied to cable tunnel monitoring system. Sensors considered herein are flame detection sensor, flood detection sensor, intruder detection sensor, and temperature sensor, etc. It is also found that the wireless sensor network can deliver sensing data reliably by wireless sensing technology. The gateway system that can transmit sensed data to server by CDMA is developed. Monitoring system is constructed by web service technology, and it is observed that this system can monitor the present state of tunnel without difficulties. The system provides an alternative to inspecting and monitoring the tunnel efficiently where the conventional wired system is infeasible.

• International Journal of Internet, Broadcasting and Communication
• /
• v.13 no.4
• /
• pp.121-128
• /
• 2021

In order to design a real time big data collection and analysis system of manufacturing data in a smart factory, it is important to establish an appropriate wired/wireless communication system and protocol. This paper introduces the latest communication protocol, OPC-UA (Open Platform Communication Unified Architecture) based client/server function, applied user interface technology to configure a network for real-time data collection through IoT Integration. Then, Database is designed in MES (Manufacturing Execution System) based on the analysis table that reflects the user's requirements among the data extracted from the new cutting process automation process, bush inner diameter indentation measurement system and tool monitoring/inspection system. In summary, big data analysis system introduced in this paper performs SPC (statistical Process Control) analysis and visualization analysis with interface of OPC-UA-based wired/wireless communication. Through AI learning modeling with XGBoost (eXtream Gradient Boosting) and LR (Linear Regression) algorithm, quality and visualization analysis is carried out the storage and connection to the cloud.

• Convergence Security Journal
• /
• v.11 no.1
• /
• pp.11-18
• /
• 2011

Wireless mesh network technology with transmission speeds similar to wired and wireless technology means to build, compared with wired networks, building a more efficient network to provide convenience and flexibility. The wireless mesh network router nodes in the energy impact of the mobility is less constrained and has fewer features entail. However, the characteristics of various kinds due to network configuration settings and the choice of multiple paths that can occur when the system overhead and there are many details that must be considered. Therefore, according to the characteristics of these network routing technology that is reflected in the design and optimization of the network is worth noting. In this paper, a multi-path setting can be raised in order to respond effectively to the problem of the router node data loss and bandwidth according to traffic conditions and links to elements of the hop count evaluation by using a genetic algorithm as a workaround for dynamic routing the routing metric for wireless mesh network scheme is proposed.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.155-155
• /
• 2000

A high performance control and monitoring system for a high speed railway train requires a reliable the real-time communication network. TCN/WTB is designed for the data transmission over the train bus, and UIC556 defines that all the data be transmitted over TCN/WTB. This paper evaluates the performance of the link layer of WTB(Wired Train Bus). The evaluated results can be used for the selection of parameters for the sporadic message data.