• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.5
• /
• pp.447-453
• /
• 2009

Community noise has been great concerned in public. A traffic noise from a road or a railway has affected too mush damage on quiet living environment. In this paper, a measured noise signal on a street has been applied to extract a noise source and a path by using a complex cepstrum. An example shows that the waveform of the source and the path could be separated if a temporal windowing is properly applied.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.8
• /
• pp.725-734
• /
• 2016

Recently, novel candidate waveform techniques for spectral efficiency improvement was proposed in order to satisfy key performance indicators(KPIs) of 5th generation(5G) mobile communication. Multi-carrier based universal filtered multi-carrier(UFMC) and filter bank multi-carrier(FBMC) are very famous as 5G candidate waveform techniques. Also, weighted orthogonal frequency division multiplexing (W-OFDM) that has low-complexity is receiving the spotlight slowly. In this paper, firstly, we describe a basic OFDM system. And then, we also describe UFMC, FBMC, and W-OFDM system. Next, we evaluate and analyze spectrum and BER performance of these systems under the nonlinear high power amplifier(HPA) environment. As simulation results, spectrum characteristic and BER performance of UFMC, FBMC, and W-OFDM are similar to each other. Therefore, under the nonlinear HPA environment, W-OFDM system is more advantageous because W-OFDM system uses a simple time-domain windowing technique and has similar characteristics to the others.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.69-74
• /
• 2005

The High Peak to Average Power Ratio (PAPR) could be a severe Problem in OFDM performance since it causes the significant distortion to the transmitting signal through a nonlinear device such as High Power Amplifier (HPA). In this paper, the performance of Peak cancellation method according to the HPA characteristic is comparatively analyzed with the clipping and windowing methods. The BER performances and the out-band power spectrums are demonstrated in detail.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.05
• /
• pp.391-394
• /
• 1997

In this paper, we considered newly the use of wavelet transform in order to improve the troubles of the established methods for the analysis of ultrasound echo signals. We made the phantoms of 13.2g, 19.8g, 26.4g, 33.0g, 39.8g by ourselves, and extracted the only pulse-echo signals that reflected through the mediums using windowing technique. For determining the characterized value, the signals were wavelet transformed, absoluted, and integral calculated. As the result, we acquired characterized value of each signals, and acknowledged the differences among them except of some datas. But this will be improved by advanced work as sellecting a proper mother wavelet, a method of making phantoms, correcting the various errors, etc. We expect that wavelet transform is powerful for analysis of ultrasound signals.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.4E
• /
• pp.53-57
• /
• 1996

An extension of the well-known Fourier transform is developed in this paper. It is denoted as the generalized Fourier transform(GFT), since it encompasses the Fourier transform as its special case. The first idea of this extension can be found on [1]. In the definition of the N-point discrete GFT, it first construct a passband in time which functions as a window in the time domain. An appropriate interpretation of each variables are introduced during the definition of the GFT, followed by the formal derivation of the inverse GFT. This transform pair is similar to the windowing in the frequency domain such as the subband coding technique (or filter bank approach) and could be extended to the wavelet transform.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2005.03a
• /
• pp.529-535
• /
• 2005

This paper presents a system identification (SI) scheme in time domain using measured acceleration data. The error function is defined as the time integral of the least squared errors between the measured acceleration and the calculated acceleration by a mathematical model. Damping parameters as well as stiffness properties of a structure are considered as system parameters. The structural damping is modeled by the Rayleigh damping. A new regularization function defined by the L1-norm of the first derivative of system parameters with respect to time is proposed to alleviate the ill-posed characteristics of inverse problems and to accommodate discontinuities of system parameters in time. The time window concept is proposed to trace variation of system parameters in time. Numerical simulation study is performed through a two-span continuous truss subject to ground motion.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.38 no.7
• /
• pp.569-581
• /
• 1989

This paper deals with a tracking algorithm based on integral projection which tracks moving targets with varying brightness and size. An adaptive windowing technique is employed to reduce the sensitivity of the system to the complex background image and also to reduce the computational load. The threshold value is determined by considering both the size and the threshold value of the brightness intensity of the recognized target obtained in the previous processing step. Window position is estimated by using the information of the velocity and acceleration of the target. And integral projection is applied to find the position of the target in the window accurately. Experimental results show that moving targets with varying brightness and size can be tracked properly in noisy environments.

• International journal of advanced smart convergence
• /
• v.4 no.2
• /
• pp.138-144
• /
• 2015

Digital filters are extensively used in the world of communication. In order to design a digital finite impulse response (FIR) filter that satisfies all the required conditions is challenging. In this paper, design techniques of digital low pass FIR filters using Rectangular window method, Hamming window, Hanning window, and Optimal Parks McClellan method are presented. The stability, number of components required and filter coefficients are demonstrated for different design techniques. It is demonstrated that filter design using hamming window is comparatively better than rectangular and hanning window though the components required for all of the windowing technique are same, hamming shows higher stability. The stability is shown with the help of magnitude and phase spectrum of each window. Simulation is carried out using MATLAB and comparisons are made entirely based on the output of the simulation.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.2
• /
• pp.186-192
• /
• 2011

In this paper, we propose a new procedure for improvement of the linear predictive coding. To reduce the error power incurred by the coding, we interchanged the order of the two procedures of windowing on the signal and linear prediction. This scheme corresponds to LPC extraction with windowed autocorrelation. The proposed method requires more calculational time because it necessitates matrix inversion on more parameters than the conventional technique where an efficient Levinson-Durbin recursive procedure is applicable with smaller parameters. Experimental test over various speech phonemes showed, however, that our procedure yields about 5 % less power distortion compared to the conventional technique. Consequently, the proposed method in this paper is thought to be preferable to the conventional technique as far as the fidelity is concerned. In a separate study of speaker-dependent speech recognition test for 50 isolated words pronounced by 40 people, our approach yielded better performance too.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.7
• /
• pp.1122-1130
• /
• 2001

In this paper, by applying the spectral domain wavelet concept to Green function, a fast spectral domain calculation of scattered fields is proposed to get the solution for the radiation integral. The spectral domain wavelet transform to represent Green function is implemented equivalently in space via the constant-Q windowing technique. The radiation integral can be calculated efficiently in the spectral domain using the windowed Green function expanded by its eigen functions around the observation region. Finally, the same formulation as that of the conventional fast multipole method (FMM) is obtained through the windowed Green function and the spectral domain calculation of the radiation integral.